News Posts matching "Lian Li"

Return to Keyword Browsing

Lian Li Announces PC-V650 ATX Chassis

Lian-Li Industrial Co. Ltd, today announces an aluminum ATX supported chassis with a side mounted power supply design – PC-V650. With the power supply to be mounted on its side, the PC-V650 is shorter than most ATX chassis while still having room to install the hardware that DIY builders desire.

Instead of sitting underneath the expansion slots, a power supply up 230mm (9.0”) in length can be placed sideways parallel to the expansions slots, adding to the width of the case. With this design the 360mm (14.1”) tall and 251mm (9.8”) wide PC-V650 does not need the extra height to fit DIY builder's preferred components.

Lian Li Announces Silent ATX Chassis - PC-B12

Lian-Li Industrial Co. Ltd, today announces a silent brushed aluminum ATX supported chassis - PC-B12. The PC-B12 has many features to keep noise down to minimum, including: a vent on the bottom of the chassis pulling in cool air, a downward facing exhaust baffle and noise dampening foam on the front and side panels.

The front panel of the PC-B12 has no visible vents. Instead of air entering in from the front, two 140 mm fans behind the front panel pull in cool air through the 12 cm wide (4.7") intake vent on the bottom of the chassis. Four sturdy aluminum feet with rubber bottoms to reduce vibrations give ample room for air to be pulled into the bottom vent. The rear 120 mm exhaust fan has an adjustable downward facing exhaust baffle on the exterior of the case with noise dampening foam that not only bounces the sound waves down, but also directs the hot air towards the floor.

Lian Li Announces PC-X2000FN Slim EATX Chassis

Lian-Li Industrial Co. Ltd, today announces a tall, slim brushed aluminum EATX supported chassis – PC-X2000FN. The PC-X2000FN keeps DIY builder's hardware neat and organized in the interior with its three separate compartments, while having a sleek, elegant feel on the outside thanks to the one-piece front panel with no visible vents on holes.

693mm (27.3”) tall and 240mm (9.4”) wide, the PC-X2000FN lets DIY builders install the hardware they desire in a neat, organized and compartmentalized fashion. The top section holds 5.25”, 3.5” and 2.5” drives. The middle section is for motherboards up to the EATX form factor, and has plenty of room for cable management thanks to the rubber grommets and generous space behind the motherboard tray. The bottom compartment holds the power supply as well as an additional 3.5” HDD cage.

Lian Li Announces EATX Supported Chassis with Front Placed PSU - PC-V750

Lian-Li Industrial Co. Ltd, today announces a brushed aluminum EATX supported chassis with a front placed PSU – PC-V750. With the power supply placed in the front, the PC-V750 can hold the hardware that enthusiasts desire while keeping a smaller footprint.

Shorter than most EATX supporting chassis, the 440mm (17.32”) tall PC-V750 can hold up to six 3.5” hard drives with hotswap capabilities in the HDD cage with one 2.5” at the bottom of the cage. Two more 2.5” drives can be installed if only four 3.5” drives are in the cage.

Lian Li Announces Two New Brushed Aluminum Cases

Lian-Li Industrial Co., Ltd. today announces two new brushed aluminum chassis - PC-V355 and PC-A55.

The micro-ATX supported PC-V355 and the slim PC-A55 ATX chassis both have the features that are to be expected from Lian Li, including: brushed aluminum frames, pop-off panels, and many tool-less features.

PC-V355 - HTPC/Mini-Tower with Slide-Out Motherboard Tray
Designed to be either a larger HTPC or mini-tower with the dimensions of (WxHxD) 283 x 263 x 386 mm (11.14" x 10.35" x 15.19"), the PC-V355, supporting a micro-ATX motherboard, has many features to make installations, upgrades and upkeep easier. The slide-out motherboard tray lets users setup their system outside of the chassis. The HDD cage supports up to three 3.5" HDDs which are secured using thumb screws with rubber suspensions for reduced vibration. A 2.5" hard drive can also be installed in the HDD bay.

Lian Li to Showcase Moving Chassis at Computex

Lian-Li Industrial Co., Ltd. will be attending Computex Taipei 2012 from June 5 to June 9, 2012 in Taipei, Taiwan. Lian Li invites and welcomes all distributors, system integrators, media, and technology enthusiasts to visit their booth (#J1009a at Nangang Exhibition Hall 1F) and get a hands-on preview of the new line before they enter the market later this year.

Lian Li Announces Three New Ultra-Compact Cases

Lian Li today announces three new brushed aluminum cases, PC-Q02, PC-Q03, and PC-Q16, designed for modern users who need a compact central storage hub to share information among all their latest generation mobile devices.

The Lian Li PC-Q02, PC-Q03, and PC-Q16 take advantage of the increasing efficiency of small form factor motherboards and progressively cheaper hard drives, and are able to hold the essential storage hardware in a small form factor. They also have high-quality features that are to be expected from Lian Li including: elegant brushed aluminum frames, easy-to-remove pop-off panels, USB 3.0 connectivity, rounded yet stable aluminum feet, as well as many tool-less features to make installations and upgrades easier. These three chassis also all have a dual LED power button which turns blue when on and glows red while reading.

Lian Li Introduces PC-Q09FN Upgraded Mini-ITX HTPC Case

Lian Li today announces their new brushed aluminum mini-ITX HTPC case, PC-Q09FN. The more roomy PC-Q09FN improves upon its predecessors, the PC-Q09 and PC-Q09F, with more hard drive storage capacity and improved cooling.

With the upgraded dimensions of 11.65” x 5.51” x 7.48” WxHxD (296mm x 140mm x 190mm), the PC-Q09FN gives DIY computers builders the space to install the essential hardware for home theater applications. Lian Li's PC-Q09FN supports a slim optical disk drive and a 3.5” HDD that can easily be taken in and out using the included thumb screws with rubber suspensions to reduce vibrations. A removable 2.5” hard drive cage allows up to three SSDs to be installed in this mini-ITX HTPC.

Lian Li Announces Their Smallest ATX Motherboard Supported Chassis - PC-V700

Lian-Li Industrial Co. Ltd, the award-winning aluminum computer chassis manufacturer, today announces their smallest chassis supporting a ATX motherboard - PC-V700. This brushed aluminum chassis allows PC builders to get the most out of every available space with its efficient and flexible design.

The PC-V700 with dimensions of 8.26" (W) x 15.74" (H) x 19.52" (D) (210 x 400 x 496 mm) gives users several options for installing their hardware in a space saving form. The hotswappable HDD cage below the 5.25" drive bay at the top of the chassis holds up to four 3.5" hard drives. The removable SSD rack that can be placed to hang underneath the 3.5" HDD bay allows users to install two 2.5" hard drives. For users that prefer longer VGA cards, when this 2.5" SSD rack is removed graphics cards up to 17.32" (440 mm) in length can be installed.

Lian Li Expands Its Line of Data Storage Chassis with the PC-Q12 and PC-Q18

Lian-Li Industrial Co. Ltd, the award-winning aluminum computer chassis manufacturer, today announces two new additions to the Q Series - PC-Q12 and PC-Q18. With the release of these two compact chassis, Lian Li gives even more options to PC builders who need elegant-looking space-saving cases with high data storage capabilities.

Designed to be central data center for the numerous hi-tech devices such as smart phones and tablets of the modern mobile consumer, the PC-Q12 and PC-Q18 both support mini-ITX motherboards. Not only do these cases have a compact design, but they also have the features that are to be expected from Lian Li, including: elegant brushed anodized aluminum frames, easy-to-remove snap-off panels, and USB 3.0 connectivity on the front panel.

Lian Li Announces the PC-Q15 Mini-ITX Chassis

Lian-Li Industrial Co. Ltd, the award-winning aluminum computer chassis manufacturer, today announces the automobile-esque PC-Q15. With its space-saving design, the PC-Q15 is an ideal data storage center for the numerous hi-tech mobile devices of the modern mobile consumer.

Supporting mini-ITX motherboards, the PC-Q15 with its the rectangular shape and wheel-like stubs resembles a miniature SUV. Not only does this chassis stand out in any environment, but the compact dimensions of (W x H x D) 210 mm x 216 mm x 330 mm (8.27" x 8.50" x 12.99") allows the PC-Q15 to serve as the home central hub for the modern mobile user in any nook or cranny.

Lian Li Announces PC-Q05 - Designed for the Intel DH-621AG Thin Mini-ITX Motherboard

Lian-Li Industrial Co. Ltd, the award-winning aluminum computer chassis manufacturer, today announces the PC-Q05. Designed for the Intel DH-61AG Thin Mini-ITX Motherboard, the ultra compact PC-Q05 is ideal for today's mobile consumers who have multiple hand-held devices and want a custom built PC at home for surfing the web, watching movies, and document writing as well as a central storage hub between all your devices.

The Intel DH-621AG motherboard gives the Lian Li PC-Q05 the essential connectivity that modern users need for multimedia and computing purposes including: two USB 3.0 and USB 2.0 slots as well as HDMI, DVI, and eSATA connections. This ultra slim chassis is also designed to hold the Intel HTS 1155LP CPU Cooler to keep your system cool in all operations.

LanCool Unveils the PC-K56N Mid-tower PC Case

Lian Li today introduced a new LanCool-branded PC chassis, a mid-tower model called PC-K56N which features support for ATX, micro ATX, and Mini-ITX motherboards, and can house graphics cards up to 415 mm long.

Made part of the Dragon Lord Series, the PC-K56N measures 210 (W) x 472 (H) x 505 (D) mm, has a steel structure and includes a front I/O panel with two USB 2.0 ports and two audio connectors, three exposed 5.25-inch bays (with tool-free mounting ), an adjustable HDD/SSD rack supporting three 3.5-inch and two 2.5-inch drives, eight (vented) PCI slots, two pre-drilled holes at the rear for routing watercooling tubing, and two fans, one 140 mm spinner in front and an 120 mm model at the back.

The LanCool PC-K56N has a recommended price tag of $99 (VAT not included).

Lian Li Displays PC-V700 ATX Mid-Tower

Lian Li displayed its latest ATX mid-tower case, the PC-V700 (not to be confused with PC-V700F, a different case). Decked in aluminum overall, with signature Lian Li styling, the PC-V700 fits in ATX and micro-ATX motherboards. It measures 210 x 400 x 496 mm (WxHxD). Its only exposed drive bay on its front is a valved 5.25-inch. Other drive bays include three hot-swap capable 3.5-inch bays (side), four conventional 3.5-inch bays, and two 2.5-inch bays.

Cooling fans include one 140 mm front intake, two 120 mm top exhausts, and one 120 mm rear exhaust. It features 8 expansion slot bays letting you use a double slot graphics card installed in the lowermost expansion slot. Front panel connectivity includes audio, two USB 3.0 ports, a USB 2.0 port, and an eSATA port (extended from the motherbaord).

Lian Li New Mini-ITX Lineup Also Includes PC-Q09FN

The new mini-ITX form-factor lineup also includes the PC-Q09FN, a model we overlooked in our news coverage of the Lian Li booth. Unlike the PC-Q12, the PC-Q09FN features a shoe-box design, measuring 296 x 135 x 190 mm. Also unlike the PC-Q12, it features room for a slim optical disc drive (such as a slim Blu-ray writer), and a 3.5-inch drive. Apart from these, the PC-Q09FN features three 2.5-inch drive bays, one 120 mm fan to ventilate it from the side, and front-panel connectivity that includes two USB 3.0 ports.

Lian Li PC-Q18 Tops It Off With Features

The most feature-rich in the trio of Lian Li's new mini-ITX Q-series cases is the PC-Q18. It is designed for performance desktops and HTPCs. Measuring 199 x 290 x 365 mm (WxHxD), the PC-Q18 is designed keeping in mind the need for a performance machine to be airy, and is hence complemented with large fans. It can hold a mini-ITX form-factor motherboard with two full-height add-on card bays, hence having the ability to hold a double-slot graphics card.

Storage features include one 5.25-inch drive bay, which is valved; four (yes, four!) hot-swap capable 3.5-inch drive bays, with drive caddies that are so designed to accommodate up to three 2.5-inch drives. It has room for a 140 mm front-intake and a 140 mm top exhaust. Front-panel connectivity includes audio and USB 3.0. The chassis is made almost entirely of aluminum.

Lian Li PC-Q15 Packs More Room For Storage

The second Lian Li mini-ITX form-factor case on display, targeting the HTPC segment, is the PC-Q15. Unlike the much taller yet feature-starved PC-Q12, the PC-Q15 is diminutive, but packs several storage and expansion features. It measures 210 x 210 x 330 mm (WxHxD), is wheeled, and made almost entirely of aluminum. It has one valved 5.25-inch drive bay, one 3.5-inch hotswap-capable drive bay, and three 2.5-inch bays. It has room for one full-height expansion card. Its front-panel includes audio and USB 3.0 ports.

Lian Li PC-Q12 Stands ''Tall'' In Your Living Room

Lian Li showed off an innovative new case that looks to be designed for living rooms. Called the PC-Q12, the case seats a mini-ITX form-factor motherboard, with no expansion slots, that makes it look tall. It measures 88 x 365 x 280 mm (WxHxD), and is made almost entirely of aluminum. Surprisingly, it lacks an external drive bay, and the only storage bays it has are four internal 2.5-inch ones. It is ventilated by one top 80 mm exhaust fan. On its front-panel, it has two USB 3.0 ports.

Build a Cooler, Faster PC with the Revolutionary Lian Li PC-100 Case

Experienced case maker Lian Li has unveiled a radical rethink of the PC case, the new PC-100. The PC-100 is a long overdue redesign of the traditional PC chassis that improves cooling, prolongs component life, and saves space. This beautiful and compact mid tower case is roomy enough for the longest graphics cards and largest E-ATX/XL-ATX/ATX motherboards, thanks to its innovative layout. It is also remarkably easy to assemble without tools. Lian Li's innovative PC-100 is a breath of fresh air for the stagnant PC case market.

Superior cooling helps CPUs and graphics cards run at maximum speed without slowdowns or crashes due to overheating. This also means higher speeds for overclockers, and extends the life of disk drives and motherboards. However, traditional case layouts have two serious barriers to optimal cooling, performance, and ease-of-use: firstly, they block airflow with a wall of hard disk drives inside the front of the case. Secondly, important ports and connectors are at the back, making them difficult to access – a defect that manufacturers can only try to address by adding a few front panel connectors.

Lian Li Announces PC-TU200 Mini-ITX Chassis

Lian Li Industrial Co. Ltd, designer and manufacturer of high-end, all-aluminum computer chassis for over 12 years, announces their latest PC-TU200 Mini-Tower PC case. This chassis optimizes thermal efficiency, convenience and mobility, offering consumers a superior platform for building their next portable PC.

The PC-TU200 is the latest addition to Lian Li's Mini-Tower product line, designed for performance-hungry consumers who require a light, compact and versatile chassis as a base for their ultimate portable gaming rig. With a base weight of only 3.15kg, the PC-TU200 is primed and ready for transportability. Available in black or silver, its "nuclear football" style design includes a top-mounted handle which allows it to be carried to LAN parties or anywhere desired with ease. The all-aluminum body features reinforced corners for strength and durability.

Lian Li Announces 'The Hammer' PC-90 Chassis

Lian Li Industrial Co. Ltd, maker of high-end, all-aluminum computer chassis for over 12 years, today introduced a full-tower chassis, the PC-90. Available in striking black or silver hairline-brushed, anodized metal casing, the PC-90, also known as 'The Hammer', represents the best of Made-in-Taiwan ingenuity and quality, with the ease of tool-less design.

The Lian Li PC-90's unique internal layout allows large HPTX motherboards to be held in a standard, full-tower case with a weight of only 6.6kg. 'The Hammer' PC-90 is light and compact, and can easily fit under a desk like a standard PC chassis. This makes the chassis an excellent solution for systems/servers/workstations without needing a large, heavy steel case.

Lian Li PC-V353 HTPC and Mini-Tower PC-Q25 Cases Launched

Ltd, maker of high-end, all-aluminum computer chassis for over 13 years, is proud to announce the release of two new PC cases: the HTPC PC-V353 and Mini-Tower PC-Q25. A new edition to Lian Li's HTPC chassis series, the PC-V353 features a handsome front mesh design and is available in eye-catching black or silver. The aluminum-front mini-tower PC-Q25 offers a contemporary design that lends itself to any professional or home environment, and is available in black and silver colors. Both of these models offer impressive engineering, the convenience of tool-free installation, and excellent air-flow.

Lian Li Announces the PC-V600F High-End Mini Tower Computer Case

Lian Li Industrial Co. Ltd, maker of high-end, all-aluminum computer chassis since 1983, today announces a new edition to their V series of PC cases with the release of their Mini Tower PC-V600F. Available in Black, Silver, and Red, as well as All Black (internal and external), this high-quality, all-aluminum computer case sports a grated front-panel design, three cooling fans (two with LED lighting), lots of build space with hot swappable capabilities, multiple USB 3.0 ports, and all the anti-vibration and tool-less features enthusiasts know are the markings of a Lian Li design. In short, another solid PC chassis from the Taiwan-based company.

Lian Li Announces the PC-A05FN ATX Mid-Tower PC Case

Lian Li Industrial Co. Ltd, maker of high-end, all-aluminum computer chassis since 1983, today releases an all-aluminum, high-end, mid-tower PC case available in silver or black called the PC-A05FN. With their commitment to optimizing instead of merely following convention, Lian Li's designers have positioned the PSU mount behind the front-panel at the base of the case, directly below the HDD cage. This unique design characteristic is complimented by a reversal of Lian Li's traditional front-to-back cooling scheme in order to achieve an increase in heat-dissipation within the PC-A05FN while reducing chassis size. With its chic and clean design, this computer case proudly bears all the markings of Lian Li's high-quality products and fits nicely into their list of outstanding 2011 releases.

Lian Li Announces HTPC PC-C60 and PC-6 ATX Mid-Tower Cases

Lian Li Industrial Co. Ltd., maker of high-end, all-aluminum computer chassis since 1983, today releases two new PC cases: the HTPC/Desktop PC-C60, and the simple and elegant mid-tower PC-6. A new edition to their Domus series of HTPC chassis, Lian Li's PC-C60 is slim, sleek, all-aluminum, and available in black or silver with an open and easy-to-upgrade internal layout. The black, all-aluminum, mid-tower PC-6 embodies Lian Li's distinctive designing characteristics and fits perfectly into their Essence series of PC chassis with a timeless and quietly artistic design. With tool-less installations, anti-vibration features, excellent air-flow, and impressive build capabilities, the PC-C60 and PC-6 once again prove the quality of products that Lian Li is known for.
Return to Keyword Browsing