News Posts matching "Lian-Li"

Return to Keyword Browsing

Lian Li Releases the PC-V359 and PC-Q36 in Two New Color Options

Lian-Li Industrial Co. Ltd, today announces that the PC-V359 and PC-Q36 are now available in two new color options: Red/Black and Champagne Gold.

Taking Modularity to the Next Level in New Colors
The PC-V359 and PC-Q36 are almost entirely modular - the acrylic top panel can be removed with the twist of four thumbscrews, and once removed, the side panels can be slid right off, providing total access to interior hardware in a matter of seconds.

Lian Li Announces the PC-V1000L Full Tower Chassis

Lian-Li Industrial Co. Ltd today announces the PC-V1000L Special Edition full tower chassis. This brushed aluminum chassis features a ventilated front providing high airflow while featuring the high-end versatile tool-less designs for which Lian Li is known.

Short Full Tower with Full Hardware Support
With a height of only 551 mm (21.7"), the 74L PC-V1000L can hold the hardware a PC enthusiast desires, including: motherboards up to EATX, the largest graphics cards, and extensive water cooling support.

Lian Li Announces PC-Q19 Brushed Aluminum Mini-ITX Chassis

Lian-Li Industrial Co. Ltd today announces a new brushed aluminum Mini-ITX chassis designed for HTPC and office use - PC-Q19. An update of the slim profile PC-Q12, the PC-Q19 adds VGA support thanks to the included riser card as well as additional storage support.

The 22L PC-Q19 has a slim profile of 160mm (6.2"), and supports the essential hardware for those looking for a sleek build for the home or office. This aluminum chassis can support up to three 2.5" drives and 1 3.5" drive. A VGA card up to 12.81 cm can sit in the middle of the chassis thanks to the included riser card and adds graphics power to the build. The PC-Q19 supports SFX power supplies, and extension cables may be needed for some PSU models.

Lian Li Announces the PC-V2130 Brushed Aluminum Full Tower

Lian-Li Industrial Co. Ltd today announces the release of a new brushed aluminum full tower chassis - PC-V2130. The update of the popular PC-V2120, the PC-V2130 improves on the design by adding extensive water cooling support, a more versatile HDD system, enhanced cable management.

At 94L, the PC-V2130 can handle any hardware PC enthusiast desire. Motherboards up to HPTX are supported. Up to 11 3.5"/2.5" drives can be mounted behind the motherboard tray and on the individually removable hard drive bays. An included removable bracket allows for 4 more 2.5" drives to be installed. The chassis also features a modular 5.25" cage that gives builders the flexibility to use the space as they see fit.

Lian Li Announces New Brushed Aluminum Mini-ITX Chasis – PC-Q01

Lian-Li today announces a new brushed aluminum Mini-ITX chassis - PC-Q01. This compact case is designed for small office/home PC environments and features a tool-lessly removable L-shaped cover that makes installations effortless in space-confined ITX systems. With its versatile storage capabilities, the 13.3L PC-Q01 provides ample space for hardware compatibility. Mini-ITX/Mini-DTX motherboards are supported, as well as double-slotted graphics cards and ATX power supplies up to 210 in length. To provide maximum storage capabilities without compromising space, on both the side panel and case floor one 3.5" and one 2.5" or two 2.5" drives can be mounted, allowing for a total of 4 drives.

Lian Li Releases PC-B16 and PC-A61 Brushed Aluminum Mid-Tower Chassis

Lian-Li Industrial Co. Ltd, today announces the release of PC-B16 and PC-A61 - two new brushed aluminum mid-tower chassis featuring a modular 5.25" cage and removable HDD bays, allowing for maximum customization. These two models share the same spacious internal design - with the PC-B16 focusing on silent operation.

Both the PC-B16 and PC-A61, 59.7L and 57.5L respectively, boast Lian Li's tool-less HDD bay system, allowing DIY builders to mount either a 3.5" or 2.5" drive on the six individually removable hard drive bays. To free up space or to enhance airflow from the two front 120mm fans, all six bays can be removed with the twist of a few thumbscrews. The 5.25" cage which houses three 5.25" bays is completely modular, giving builders flexibility to use the space as they see fit. An additional 2.5" can also be mounted behind the motherboard tray.

Lian Li Releases Two Modular Chassis: PC-V359 and PC-Q36

Lian-Li Industrial Co. Ltd, today announces the release of two highly modular, brushed aluminum chassis with slide off side panels: PC-V359 and PC-Q36. The Micro-ATX PC-V359 and Mini-ITX PC-Q36 feature a see-through top panel and front window, making builds easily visible from the top and the front. Both chassis are are almost entirely modular - the top panel can be removed with the twist of four thumbscrews, and once removed, the side panels can be slid right off, providing total access to interior hardware in a matter of seconds.

Furthermore, after removing the two thumb screws from the 3.5" cage, the cage itself, as well as the entire front panel, can be removed. The back panel can also be removed after taking out two screws. The PC-V359 and PC-Q36 can utilize air, water, and passive cooling to keep builds running at a comfortable temperature. Ventilation with filters are located at the top of both side panels. One side can support a 240mm radiator, while the other side ventilates the GPU.

Lian Li Releases DK-01X and DK-02X Desk Chassis

Lian-Li Industrial Co. Ltd, today announces the release of two desk chassis - the single-system DK-01X and the dual-system DK-02X. Constructed of aluminum and combining the symbiotic relationship of desks and computer cases, these all-black hybrid chassis allow DIY builders to build a full computer inside a desk and show off their hardware creations through tempered glass desktops.

The DK-01X and DK-02X feature a lockable sliding door to make installations and upgrades easy. The adjustable/removable keyboard tray makes typing and mousing comfortable, and the side mounted pocket with headphone rack allows users to easily store unused accessories. The DK-01X support motherboards up to HPTX. The DK-02X supports motherboards up to HPTX for its workhorse-oriented system side, and mini-ITX motherboards on the gaming-oriented side.

Lian Li to Showcase 3 Desk Chassis Models at COMPUTEX 2014

Lian-Li Industrial Co. Ltd, is pleased to announce that three versions of its desk chassis, plus 7 new cases will be on display at COMPUTEX 2014 in Taipei, Taiwan from June 3 to June 7, 2014. Lian Li invites all interested parties to visit their booth, #D0629a Hall 1 at the World Trade Center. Booth visitors can take a seat at Lian Li's DK01, DK02, and DKQ1 desk chassis. Constructed of aluminum and combining the symbiotic relationship of desks and computer cases, these hybrid chassis allow DIY builders to build a full computer inside a desk and show off their hardware creations through tempered glass desktops.

In addition to the three desk chassis, booth visitors can get a hands-on preview of 7 new models before they hit the market, including test benches, small form factor cases, and mid-towers. Lian Li will be also be displaying its current line of mini, micro, mid, and full tower brushed aluminum chassis with the high quality build and features that are to be expected from Lian Li.

Lian Li Launches the PC-Q01 Mini-ITX PC Chassis

Lian Li today announces a new brushed aluminum Mini-ITX chassis - PC-Q01. This compact case is designed for small office/home PC environments and features a tool-lessly removable L-shaped cover that makes installations effortless in space-confined ITX systems.

Take Advantage of Increasingly Efficient SFF Hardware
With its versatile storage capabilities, the 13.3L PC-Q01 provides ample space for hardware compatibility. Mini-ITX/Mini-DTX motherboards are supported, as well as double-slotted graphics cards and ATX power supplies up to 210 mm in length.

Lian Li to Showcase DK01 Desk Chassis at CeBIT 2014

Lian-Li Industrial Co. Ltd, is pleased to announce that the DK01 desk chassis, along with community collaborated chassis and two unreleased models, will be on display at CeBIT 2014 in Hannover, Germany from March 10 to 14, 2014. Lian Li invites all interested parties to visit them at Hall 17, Booth F24. Combining the symbiotic relationship of desks and computer cases, the DK01 is a chassis like no other. Constructed of aluminum, this hybrid chassis allows DIY builders to build a full computer inside the desk and show off their hardware creations through the tempered glass desktop. The DK01 eliminates the need for PC towers.

Modified according to feedback across the social media and tech media sphere, the newly released, community collaborated PC-A51 mid-tower chassis as well as the updated versions of the previewed PC-B16 and PC-A61 will also be on display at Lian Li's booth. These three fully aluminum chassis are a conglomeration of user feedback on prototype models and Lian Li's time-honed expertise and engineering capabilities. Visitors to the booth will be able to provide their feedback for the PC-B16 and PC-A61 as well as the DK01, which will be updated additionally after the show.

Lian Li Launches the PC-A51 Aluminum Mid-Tower PC Case

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid-tower chassis with a reverse airflow design - PC-A51. Previewed to the worldwide DIY community in its prototype stage, the PC-A51 is a conglomeration of user feedback and Lian Li's time-honed expertise and engineering capabilities.

Reverse Airflow Design
This community collaborated chassis sports a reverse airflow design in which cool air is pulled into the chassis from the rear filtered 120 mm fan. The front 140mm fan above the front-mounted PSU pulls hardware-damaging hot air out of the case. An additional 120 mm or 140 mm fan can be mounted on the floor of the chassis.

Lian Li Releases the PC-Q33 Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum Mini-ITX chassis - PC-Q33 - with a flip-open design and space-efficient hardware support. The PC-Q33 provides plenty of working space for DIY builders. Builders can swing open the top and front panel of this brushed aluminum chassis providing easy access to the internal components.

At 18L, the PC-Q33 supports a tremendous amount of hardware for its size. Taking advantage of every available space Lian Li's latest brushed aluminum chassis accommodates CPU coolers up to 180mm (7.0") in height and ATX power supplies up to 200mm in length. The latest powerful low-profile graphics cards up to 220mm (8.6") easily fit inside the chassis.

Lian Li Releases the PC-V358 M-ATX Chassis in North America

Lian-Li Industrial Co. Ltd, today releases the brushed aluminum M-ATX cube chassis - PC-V358 - in North America. The PC-V358 provides plenty of working space for DIY builders. Builders can swing open the top and front panel of this brushed aluminum chassis providing easy access to the internal components. 240mm radiators as well as AIO liquid cooling kits can be installed on a hinged bracket. The bracket is secured by thumbscrews and can be swung open on its hinge to allow for easy access of the internal components. The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.

Lian Li Unveils the PC-Q35 Mini-ITX PC Chassis

Lian-Li Industrial Co. Ltd, today announces the brushed aluminum PC-Q35 chassis. Designed for users who want to build their own NAS as well as system integrators, the compact PC-Q35 supports Mini-ITX and Mini-DTX motherboards.

Small Chassis with Big Hardware Support
With a volume around 29.2L, the PC-Q35 supports an outstanding amount of hardware for its size. Up to seven hard drives can be installed: five 3.5" and two 2.5" drives. Expansion cards up to 300 mm and ATX power supplies up to 200 mm are also supported.

Lian Li Releases the PC-D600 Brushed Aluminum Chassis in North America

Lian-Li Industrial Co. Ltd today releases the PC-D600 double wide brushed aluminum chassis that was previously announced at COMPUTEX 2013. Supporting EATX, ATX and Micro-ATX motherboards, the PC-D600 with 2mm thick aluminum panels has a two compartment design, supports water cooling setups, and has numerous tool-less features to give absolute freedom to enthusiasts and modders to build a high end system. Separating the internal components into two compartments, the PC-D600 allows DIY enthusiasts to show off high end and intricate setups through the side panel window, while giving plenty of room for the wires and less eye-catching components on the other side of the motherboard tray. Not only does the two compartment design allow enthusiasts to show off their builds, it also allows uninterrupted airflow across the heat generating components.

Lian Li and Micro Center Sign Distribution Agreement

Lian-Li Industrial Co. Ltd, today announces that it has signed a distribution agreement with Micro Center, technology retailer focused on knowledgeable computer users. Micro Center will be carrying the latest Lian Li cases and accessories as well as older popular models. Micro Center will also be the first US vendor to carry the PC-A79 full tower and M-ATX PC-V360 chassis. Distribution begins at the end of September 2013.

Micro Center operates twenty-two large stores in major markets in the USA. Founded in 1979 in Columbus, OH, Micro Center is a destination retailer designed to satisfy the dedicated computer user. Uniquely focused on computers and computer-related products, Micro Center offers more computer and computer-related items (more than 30,000 in stock) than any other retailer. Micro Center is deeply passionate about providing product expertise and exceptional customer service.

Lian Li Announces the PC-10N Mid Tower Chassis in North America

Lian-Li Industrial Co. Ltd today releases a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N, in North America. Besides allowing for a 240mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management. A hinged bracket directly across the CPU allows DIY builders to install a 240mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.

Lian Li Releases the PC-A79 Full Tower Chassis

Lian-Li Industrial Co. Ltd today announces the release of a new brushed aluminum full tower chassis with a versatile cooling design and removable motherboard tray - PC-A79 - in North America. Capable of supporting HPTX, E-ATX, XL-ATX, ATX, and Micro-ATX motherboards, this fully aluminum full tower easily contains the latest high-end components, while keeping these components at optimal operating temperatures with its versatile and effective cooling design.

The PC-A79 gives DIY builders several cooling options for a variety of system setups. For the front intake, the three HDD cages have 120mm fans mounted to them. These cages can be set up so that the fans are either towards the front of the case or behind the cage. A dust filter on each on the individual 5.25" front bezels prevents dust from coming in, no matter the setup.

Lian Li Announces the PC-V360 M-ATX Chassis

Lian-Li Industrial Co. Ltd today announces a new slim brushed aluminum M-ATX chassis with side mounted radiator support, PC-V360. While having a small and slim profile, the PC-V360 allows DIY builders to assemble an enthusiast level system with support for AIO liquid cooling systems. A hinged bracket directly across the CPU allows DIY builders to install a 240mm radiator in the PC-V360. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components. The bracket can also be removed for fan/radiator mounting as well as taken off completely if not being used.

Lian Li Unveils the PC-10N Mid-Tower PC Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid tower chassis with side mounted radiator support, PC-10N. Besides allowing for a 240 mm radiator to be placed on a hinged bracket, the PC-10N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management.

Side Mounted 240 mm Radiator Support
A hinged bracket directly across the CPU allows DIY builders to install a 240 mm radiator in the PC-10N. The bracket secured by thumbscrews can be swung open on its hinge to allow for easy access of the internal components.

Lian Li Announces the PC-TU100 Mini-ITX Chassis

Lian-Li Industrial Co. Ltd is pleased to announce their newest edition to the briefcase chassis "TU" series - PC-TU100 Mini-ITX Chassis. More compact than the PC-TU200, the fully aluminum PC-TU100 is the ideal choice for the ultimate LAN rig with its top-mounted handle and its support for the latest powerful low profile graphics card. The stylish retro "007-esque" design of the chassis is sure to garner much attention.

With dimensions of (WxHxD) 158 x 275 x 242 mm (6.2" x 10.8" x 9.5") and a weight of 1.77 kg (3.9 lb), the PC-TU100 holds the hardware necessary for a portable gaming system while being primed and ready for transport. Two 2.5" hard drives or SSDs can be mounted on the bottom drive rack. An additional 2.5" drive can be placed in the slim optical drive bay, if no optical drive is installed. Graphics cards up to 190 mm can be installed in the chassis - enough room for some of the latest small form factor graphics cards. The PC-TU100 supports SFX power supplies up to 170 mm.

Lian Li Announces New PC-Q13 Curved Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum Mini-ITX chassis ? PC-Q13. With its curve-shaped design and large acrylic front window the fully aluminum PC-Q13 allows users to show off their systems, and is sure to be the talking piece of any room. Whether in the living room, bedroom, or office, the PC-Q13 with its curve-shape and brushed aluminum finish takes visual command without being ostentatious. Additionally, DIY builders can put their stylized internal components and intricate builds on full display ? as they should not be hidden from sight.

Thanks to the two expansion slots on the top of the chassis, the PC-Q13 supports graphics cards up to 200mm (7.8"). For storage, up to four 2.5" hard drives or SSDs can be mounted in the removable hard drive cage at the bottom of the chassis. A 140mm fan in the rear of the chassis expels hot air, while ventilation on the top and side allows for cool air to enter. A small form factor power supply up to 125 mm (4.9") is placed on rubber pads in order to reduce vibrations.

Lian Li Announces Two New Brushed Aluminum Mini-ITX Chassis: PC-Q27 and PC-Q28

Lian-Li Industrial Co., Ltd. today announces two new brushed aluminum Mini-ITX chassis: PC-Q27 and PC-Q28. These two compact cases feature Lian Li's new railing mount motherboard tray design, and allow for the Mini-ITX platform to be combined with traditional full-sized components.

In addition to the new motherboard tray, both of Lian Li's new Mini-ITX chassis have a new side panel removal design. After removing a single screw, the side panel easily slides off with minimal effort.
Return to Keyword Browsing