News Posts matching "Lian-Li"

Return to Keyword Browsing

Lian Li Announces New PC-Q13 Curved Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum Mini-ITX chassis ? PC-Q13. With its curve-shaped design and large acrylic front window the fully aluminum PC-Q13 allows users to show off their systems, and is sure to be the talking piece of any room. Whether in the living room, bedroom, or office, the PC-Q13 with its curve-shape and brushed aluminum finish takes visual command without being ostentatious. Additionally, DIY builders can put their stylized internal components and intricate builds on full display ? as they should not be hidden from sight.

Thanks to the two expansion slots on the top of the chassis, the PC-Q13 supports graphics cards up to 200mm (7.8"). For storage, up to four 2.5" hard drives or SSDs can be mounted in the removable hard drive cage at the bottom of the chassis. A 140mm fan in the rear of the chassis expels hot air, while ventilation on the top and side allows for cool air to enter. A small form factor power supply up to 125 mm (4.9") is placed on rubber pads in order to reduce vibrations.

Lian Li Announces Two New Brushed Aluminum Mini-ITX Chassis: PC-Q27 and PC-Q28

Lian-Li Industrial Co., Ltd. today announces two new brushed aluminum Mini-ITX chassis: PC-Q27 and PC-Q28. These two compact cases feature Lian Li's new railing mount motherboard tray design, and allow for the Mini-ITX platform to be combined with traditional full-sized components.

In addition to the new motherboard tray, both of Lian Li's new Mini-ITX chassis have a new side panel removal design. After removing a single screw, the side panel easily slides off with minimal effort.

Lian Li Announces the PC-9N Mid Tower Chassis

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid tower chassis, the PC-9N. Supporting ATX and micro-ATX motherboards, the PC-9N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management.

Lian Li's new railing mount technology greatly improves airflow under the motherboard, helping systems run cooler. This innovative Lian Li design replaces the traditional solid motherboard tray used in competing products, which blocks airflow and adds to system weight and cost. The new railing system also provides better routing options for internal wiring and cables, reducing clutter, improving system appearance and further improving airflow.

Lian-Li PC-A02 Micro-ATX Case Detailed

Lian-Li's sole micro-ATX exhibit at CES is the PC-A02. The all-aluminum monolith is characterized by a thin line of perforation along its front panel. Measuring 188 x 460 x 386 mm (WxHxD), it features room for a 5.25-inch drive, three 3.5-inch drives, and a 2.5-inch one. There's just the one drive cage to hold internal drives, and hence room for add-on cards as long as 33 cm is created. Its lone cooling fan is a 120 mm front-intake. Its feature-rich front-panel (located on the top) features four USB 3.0 ports (standard header), an eSATA port, and HD audio jacks.

Lian-Li PC-N1 Replacement Case for Intel NUC Pictured

Quite a few case-makers are jumping in with replacement cases for Intel's new NUC (next unit of computing) form-factor (Intel Desktop Boards D33217CK and D33217GKE), which beats all established volume/performance standards. Lian-Li's contribution is the PC-N1. This all-aluminum case measures 122 x 40 x 108 mm (WxHxD), which is roughly as big as a router. Following strict form-factor specifications, it lacks any additional drive bays, or active cooling, leaving its high-quality aluminum to do the tedious job of dissipating heat.

Trio of New Lian-Li PC-Q Series Mini-ITX Cases Detailed

Aluminum case specialist Lian-Li's mini-ITX motherboard lineup for CES included the PC-Q27, PC-Q28, and PC-Q30 (pictured in that order). The PC-Q27, the smallest of the lot, measures 200 x 321 x 240 mm (WxHxD), and packs just enough room for two 3.5-inch drive bays that can hold 2.5-inch drives, in addition to a 5.25-inch bay. The lone cooling fan is a 120 mm front intake.

Moving on, the PC-Q28, which measures 225 x 305 x 345 mm, is a little more generous to the storage-conscious, with room for six 3.5-inch bays which each convert to 2.5-inch, in addition to a 5.25-inch bay. Ventilation includes a 120 mm front intake, and a 140 mm top exhaust. Lastly, there's the PC-Q30, in which Lian-Li's designers's took off on their usual fungal trip. It features a large front acrylic window, through which you get a God's-eye view of the motherboard tray, and whatever you have running on it. The Q30 measures 200 x 327 x 248 mm, lacks 5.25-inch bays, but features three 2.5-inch bays, and a 120 mm rear fan.

Lian Li Announces the PC-7H Worldwide Modding Contest

Lian-Li Industrial Co. Ltd, today announces the launch of its PC-7H Modding Contest. Beginning on October 19, 2012, Lian Li is inviting the worldwide modding community to join, and will be giving away prizes, including, Lian Li cases, motherboards, graphics cards, and cash.

To register for the contest, head to Lian Li's official forum at xtremesystems.org. After registering at XtremeSystems go to the Lian Li Product Support forum and start a new thread with a post of your PC-7H and hardware before you begin modding.

Lian Li Introduces the PC-D8000 Chassis

Lian-Li Industrial Co., Ltd, today announces the massive brushed aluminum HPTX supported chassis – PC-D8000. Able to hold up to twenty 3.5" hard drives, two power supplies and one of the largest motherboard form factors on the market, the PC-D8000 has plenty of space to fit all the hardware an enthusiast desires.

The massive 405 mm x 628 mm x 572 mm (15.9" x 24.7" x 22.5") PC-D8000 complements the virtually limitless hardware and storage capabilities with many tool-less features for ease of installation. The front panel of the PC-D8000 pops-off allowing full access to the twenty 3.5" hard drives. Each drive can be easily secured and removed thanks to the included thumbscrews and rubber suspensions. A key lock for the 3.5" HDD cage preventing unwanted removal of the hard drives adds extra security.

Lian Li Announces the PC-7H Mid Tower Chassis

Lian-Li Industrial Co., Ltd, today announces a new brushed aluminum mid tower chassis – PC-7H. Supporting ATX and micro-ATX motherboards, the elegant PC-7H gives DIY builders a simple yet functional design with many tool-less options.

The Lian Li PC-7H can hold up to four 3.5" hard drives and one 2.5" SSD in the HDD cage in the front of the chassis. The 3.5" drives are secured into place using thumbscrews with rubber suspensions to reduce vibrations. For those looking to modify this all aluminum chassis, the HDD cage can be easily removed.

Lian Li Unleashes the PC-CK101 Train Themed Aluminum Chassis

Lian-Li Industrial Co., Ltd. today announces the PC-CK101 train themed aluminum chassis. Resembling a traditional steam engine train while still functioning as a computer case, this Lian Li 2012 Special Edition Chassis combines the train and DIY builder enthusiast worlds into one. Lian Li will also be launching a giveaway of the PC-CK101 to one lucky fan along with the release of the PC-CK101 on their new Facebook page.

Available in two different versions the stationary PC-CK101 Standard and the moving PC-CK101 Premium, this Lian Li chassis is perfect for whether you want an unique, eye-catching chassis to serve as your home or home theater PC, or a finely-crafted aluminum train moving up and down the tracks.

Lian-Li Debuts Two New Full Tower Cases - PC-A75X and PC-A76X

Lian-Li Industrial Co. Ltd, today announces two new brushed aluminum full tower chassis – PC-A75X & PC-A76X. These two new HPTX supporting chassis while having the same internal design offer two different aesthetic styles to fit your personal preference. Whether you prefer a front panel with visible ventilation or a more monolithic design, these two new 585 mm (23”) tall and 220 mm (8.6”) wide chassis will fit your style while holding the hardware you desire.

The PC-A75X's vented front panel allows cool air to be easily pulled into the chassis, and the two 5.25” bays are easily accessible from the front. The front panel of the PC-A75X is also tool-lessly removable. For those who prefer a more monolithic design, the PC-A76X has a lockable solid aluminum front bezel door covering the fans and 5.25” bays. Vents on the side of the door and bottom of the chassis ensure that cool air is pulled into the case, while still keeping its elegant design.

Lian Li Announces PC-V650 ATX Chassis

Lian-Li Industrial Co. Ltd, today announces an aluminum ATX supported chassis with a side mounted power supply design – PC-V650. With the power supply to be mounted on its side, the PC-V650 is shorter than most ATX chassis while still having room to install the hardware that DIY builders desire.

Instead of sitting underneath the expansion slots, a power supply up 230mm (9.0”) in length can be placed sideways parallel to the expansions slots, adding to the width of the case. With this design the 360mm (14.1”) tall and 251mm (9.8”) wide PC-V650 does not need the extra height to fit DIY builder's preferred components.

Lian Li Announces PC-X2000FN Slim EATX Chassis

Lian-Li Industrial Co. Ltd, today announces a tall, slim brushed aluminum EATX supported chassis – PC-X2000FN. The PC-X2000FN keeps DIY builder's hardware neat and organized in the interior with its three separate compartments, while having a sleek, elegant feel on the outside thanks to the one-piece front panel with no visible vents on holes.

693mm (27.3”) tall and 240mm (9.4”) wide, the PC-X2000FN lets DIY builders install the hardware they desire in a neat, organized and compartmentalized fashion. The top section holds 5.25”, 3.5” and 2.5” drives. The middle section is for motherboards up to the EATX form factor, and has plenty of room for cable management thanks to the rubber grommets and generous space behind the motherboard tray. The bottom compartment holds the power supply as well as an additional 3.5” HDD cage.

Lian Li Announces EATX Supported Chassis with Front Placed PSU - PC-V750

Lian-Li Industrial Co. Ltd, today announces a brushed aluminum EATX supported chassis with a front placed PSU – PC-V750. With the power supply placed in the front, the PC-V750 can hold the hardware that enthusiasts desire while keeping a smaller footprint.

Shorter than most EATX supporting chassis, the 440mm (17.32”) tall PC-V750 can hold up to six 3.5” hard drives with hotswap capabilities in the HDD cage with one 2.5” at the bottom of the cage. Two more 2.5” drives can be installed if only four 3.5” drives are in the cage.

Lian Li to Showcase Moving Chassis at Computex

Lian-Li Industrial Co., Ltd. will be attending Computex Taipei 2012 from June 5 to June 9, 2012 in Taipei, Taiwan. Lian Li invites and welcomes all distributors, system integrators, media, and technology enthusiasts to visit their booth (#J1009a at Nangang Exhibition Hall 1F) and get a hands-on preview of the new line before they enter the market later this year.

Lian Li PC-Q15 Packs More Room For Storage

The second Lian Li mini-ITX form-factor case on display, targeting the HTPC segment, is the PC-Q15. Unlike the much taller yet feature-starved PC-Q12, the PC-Q15 is diminutive, but packs several storage and expansion features. It measures 210 x 210 x 330 mm (WxHxD), is wheeled, and made almost entirely of aluminum. It has one valved 5.25-inch drive bay, one 3.5-inch hotswap-capable drive bay, and three 2.5-inch bays. It has room for one full-height expansion card. Its front-panel includes audio and USB 3.0 ports.

Lian Li's Lancool Brand Launching First Knight Series

Lancool, maker of mid to high-end computer chassis for over twenty years, has launched three, new, mid-tower PC cases: the PC-K57, the PC-K59, and the PC-K63. Utilizing their affiliation with high-end chassis manufacturer Lian-Li, Lancool has designed all three of these PC cases with anti-vibration, tool-less installations of components, all-black SECC steel exteriors, and superior thermal performance capabilities, while providing exceptional aesthetic appeal.

Lian Li Launches All-New PC-Q06 Mini Tower Series Case

Lian Li Industrial Co. Ltd Ltd, today announces its launch of the all-new Mini-Q Series. More than just a PC case, the compact PC-Q06 supports mini-ITX motherboards on the top while protecting components in the case body. Designed for IT professionals, overclockers and the serious power users, the PC-Q06 allows easy and quick access to the motherboards and VGA cards. Lian Li once again leads the industry by offering the ultimate quality and user-friendly design on its mini tower products.

The dimensions of PC-Q06 series stand at 205 x 210 x 250mm (W.H.D) at only 1.2kg weight. The hairline-brushed, all aluminum mini-tower chassis supports mini-ITX motherboards on the top, with optional ATX or mini-ATX motherboard tray. It includes holders for two PCI brackets to support heavy graphic cards mounted. The PC-Q06 case body has place for one standard 5.25” optical drive, one standard 3.5” hard drive, one standard ATX PS/2 power supply unit, and features two USB3.0 and HDA audio ports on the front. The PC-Q06 series is available in red, black and silver colors.

Lian Li Launches PITSTOP PC-T1 Mini-ITX Spider Test Bench

Lian Li Industrial Co. Ltd Ltd, today officially launches the PITSTOP T1 Mini-ITX Spider Test Bench 2010 Special Edition, promising to be an eye-catching and most innovative testing bench in the industry. Uniquely designed with spider's four legs and M/B tray completely angle-adjustable available in red, silver and black colors, Lian Li's PC-T1 is most ideal for hardware enthusiast looking to display an impressive computer system for the next LAN Party or to challenge family and friends with a unique looking HTPC.

After the PC-777 snail shell design and the PC-888 sail design, the PC-T1 challenges again the concept of how a PC case has to look. Since its first appearance at CeBIT 2010, Lian Li’s T1 mini-ITX Spider Test Bench has caused a great sensation and whirlwind of inquires.

Lian Li Launches the All New PC-7FN and PC-60FN Mid-Tower Chassis

Lian-Li Industrial Co. Ltd Ltd today launches the PC-7FN & PC-60FN. These all aluminum black anodized Midi Tower chassis have the traditional clean cut styles, but included are some exciting new tool-less options that make them stand out. The cases dimensions stand at 210mm x 470mm x 490mm (W, H, D) . They support ATX, and Micro-ATX form factors, with 4x 3.5" drive bays; 8x PCI Expansion Slots, and 5x 5.25” ODD bays with one removable 5.25” to 3.5” convertor. The stylish, minimalist and optimized theme incorporates 1.5mm to 1.2mm thick aluminum anodized panels with a hairline brushed finish to an all round quality product. The difference between the PC-7FN and PC-60FN is the front panel design. The PC-7FN has smooth rounded vent holes, while the PC-60FN has a more open bezel front face. Each caters for a unique different taste.

Lian Li Launches the PC-B25F Midi tower Chassis for Discerning Consumers

Lian-Li Industrial Co. Ltd Ltd has launched the PC-B25F midi tower chassis. The hair-line brushed all aluminum chassis is based on the original PC-B25 “Blue Ring” classic, however it has a few more refinements to make it that much more attractive. It still retains the basic award winning design but now has a completely tool-less functionality inside the chassis to help you install and uninstall your components with ease. These latest tool-less features are becoming an expected aspect of Lian Li chassis and ensure time saving as well as securing your hardware safely.

ATI ''Evergreen'' Promises You Won't Believe Your Eyes

All bets are off, AMD's DirectX 11 compliant GPUs are on course to compliment the commercial launch of Microsoft Windows 7, with enough of a head-start to allow buyers to have DirectX 11 hardware by the time they have the new OS. Codenamed "Evergreen", AMD's new family of graphics processors are slated for September 10, that's 25 days from now.

The company further carried out demos of its upcoming hardware to sections of the media in private, at their suite in the same hotel in which Quakecon 2009 is being hosted at. Behind the covered side-panel of the Lian-Li is a working sample, which AMD refused to let being pictured. Legit Reviews sneaked around the case to take a shot of its panel nevertheless.

AMD further demonstrated over six new technology demonstrations including Parallax Occlusion Mapping, Detailed Tessellation, and High-Definition Ambient Occlusion, all of which will be some of the key ingredients of DirectX 11, and in all of which, AMD's hardware is churning out high frame-rates at 2560x1600 pixel resolution.

Sources: Legit Reviews, Techpulse360

Lian Li Launches the All New Tyr PC-X1000 Stylish Midi-Tower Chassis

Lian-Li Industrial Co. Ltd Ltd has launched the the Tyr PC-X1000 chassis designed as a stylish midi-tower chassis. The Tyr PC-X1000 follows in the prestigious footsteps of its predecessors, namely the PC-X500 and the PC-X2000. Both of a controversial design with side mounted ODD bays. The PC-X1000 however has three traditional front mounted ODD bays as well as three front mounted 140mm fans down the front of the case. Similarly, the PC-X1000 has specific heat zones to isolate and extract heat more efficiently. The lower region is for HDD's and the PSU, the central region is for the motherboard and all daughter cards including graphics. The topmost zone is for ODD's and additional HDD's. Some unique features include the completely tool-less design, the best side panel case entry latch and special mounting bays for 2.5" SSD drives. The Tyr PC-X1000 is destined to become your next powe r-user Chassis allowing unprecedented high performance components to be encompassed in a stylish minimalistic midi-tower chassis.

Lian Li launches PC-A70F/A71F Full Tower Chassis

Lian-Li Industrial Co. Ltd Ltd has launched the PC-A70F/71F Full Tower chassis ideal for power users and server systems. The hair-line brushed all black aluminum chassis features two fans on the front (2x 140mm@1000RPM), and 2x rear 120mm fans @1500RPM. The 7x PCI expansion slots enable CrossFire and SLI graphic card setups. The chassis front face has either a door assembly which can open from either side as needed (PC-A71F) or a front panel which clips off conveniently as needed (PC-A70F). The inlet fans have filters that are washable. The entire chassis is designed for tool-less implementation, so installing your hardware and getting your system up and running is extremely easy. The dimensions stand at 220mm x 590mm x 615mm ( W, H, D) for the PC-A71F, and 220mm x 590mm x 585mm ( W, H, D) for the PC-A70F.

Lian Li Launches PC-8N General Purpose Midi Tower Chassis

Lian-Li Industrial Co. Ltd has launched the PC-8N Mid Tower chassis ideal for PC systems. The hair-line brushed all aluminum chassis features advanced thermal dynamics, using one fan on the front (1x 120mm@1200RPM) to pump cool air into the chassis where it exhausts out the rear fan (1x 120mm@1200RPM). The 7x PCI expansion slots are vented and assist with airflow. The chassis front face has 4x 5.25" ODD bays and a 3.5" drive bay. The front face clips off easily and conveniently. The dimensions stand at 210x450x490mm (W, H, D). The top panel is removable and the entire system has smoothed edges, and an anti-vibration design.

The chassis supports 4x 5.25" Optical drive bays with 1x 3.5" external. The HDDs have a specially designed cage that secures them snugly via thumb screw struts supported with rubber grommets. The entire cage secures the HDDs via a patented slider bar that secures all the HDDs simultaneously. The PC-8N midi case is for Micro-ATX or ATX motherboards and has 7 PCI expansion slots, which are well ventilated with special vented brackets when not in use. The top panel is removable with the multimedia I/O ports on the front panel consisting of 2x USB2.0 as well as HD+AC97 Audio. The PSU fits securely at the rear top of the chassis.
Return to Keyword Browsing