News Posts matching "Low-Profile"

Return to Keyword Browsing

Phanteks Announces the TC12LS Low-Profile CPU Cooler

Phanteks announces the release of the PHTC12LS, a low profile CPU cooler. The PH-TC12LS comes equipped with the latest PHF120MP PWM High Static Pressure fan designed to overcome airflow restriction caused by high fin density.

Designed specifically for HTPC, the PHTC12LS stands at only 47mm tall (74mm with fan) and compatible with 99mm small form factor case. The six 6mm C-type nickel plated heatpipes with the slim aluminium stacked fins delivers thermal conductivity more efficiently. The new design aluminium stacked fins are slimmer, resulting in faster heat distribution on the surface of the fins.

SilverStone Launches the Argon AR05 and AR06 Low-Profile CPU Coolers

SilverStone Technology has now introduces two new CPU coolers in the Argon Series, the AR05 and AR06. Both models feature a low-profile (the AR05 is 36.7 mm tall while the AR06 stands at 58 mm), they are equipped with a 92 mm Rifle Bearing fan working at 1200 to 2500 RPM, and feature support for Intel Socket LGA1155/1156/1150 and AMD Socket AM2/AM3/FM1/FM2.

The Argon AR05 has two 6 mm copper heatpipes and costs 27 Euro, while the Argon AR06 packs four heatpipes and is priced at 30.50 Euro. Both coolers are expected to become available next week.

Scythe Unveils Kodati Ultra Low-Profile CPU Cooler

Scythe unveiled the Kodati ultra low-profile CPU cooler (model: SCKDT-1000), which could give Intel's stock heatsink a run for the money in compactness. Its biggest selling point is its height of just 3.4 cm (including fan). Kodati is a C-type aluminium fin-stack heatsink, in which heat drawn from a nickel-plated copper base is conveyed to a dense aluminium fin-stack, which propagates along the plane of the motherboard, by a pair of 6 mm-thick nickel-plated copper heat pipes. The fin stack is ventilated from below (blowing upwards through the stack), by a 10 mm-thick 80 mm fan, which features 4-pin PWM connector. The fan can push between 6 and 24.8 CFM of air, spinning at speeds between 800 and 3,300 RPM, with noise outputs ranging between 8.2 and 32.5 dBA. In all, the cooler measures 82.5 mm x 95 mm x 34 mm (WxDxH), weighing 180 g. Among the CPU socket types supported, are LGA115x, LGA775, AM3(+), and FM2(+). Its availability is slated for mid-June, 2014.

RAIJINTEK Introduces the Pallas and Zelos Low-Profile CPU Coolers

RAIJINTEK has this week announced the new additions to its cooling offers, the Pallas (high-end) and Zelos (mid-range) low-profile CPU coolers. Pallas measures 153 x 150 x 68 mm and features a nickel plated heatsink with a copper base, solder-free aluminum fins and six 6 mm heatpipes, plus a 140 x 150 mm Sleeve Bearing fan that can operate at 650 to 1400 RPM (max sound output is 28 dBA).

Zelos is 94 by 93 by 44 mm and has an aluminum heatsink with three direct-contact 6 mm nickel-plated heatpipes, and one 90 mm Hydraumatic Bearing fan working at 800 to 1400 RPM (20 dBA max sound output).

SilverStone Debuts the Nitrogon NT07-115X Low-Profile CPU Cooler

SilverStone is this week rolling out a new, super slim profile CPU cooler, the NT07-115X model part of the Nitrogon Series. The incoming cooler measures 90 (W) x 23 (H) x 90 (D) mm and features a copper base, extruded aluminum fins, and a 80 mm fan operating at 1200 to 3400 RPM (maximum sound output is 26 dBA).

The Nitrogon NT07-115X supports Intel Socket LGA1156/1155/1150 processors and can be found listed (pre-order) with a price tag of £14.83 (~ 24 USD).

SilverStone Introduces the Argon AR04 Low-Profile CPU Cooler

SilverStone Technology has now announced the AR04, a new CPU cooler part of the Argon Series that is only 23 mm tall. This HTPC-friendly cooler features two 6 mm direct-touch copper heatpipes, aluminum fins, and an 80 mm Sleeve Bearing fan that can operate at 1500 to 3400 RPM (maximum sound output is 26 dBA), and supports Intel LGA 115X processors with a TDP of up to 65 W.

The Argon AR04 can be found at Amazon.com (it's out of stock at the time of writing) bearing a price tag of $26.99.

DeepCool Unveils the GAMER STORM GABRIEL Low-Profile Cooler

DeepCool has kicked off this week by announcing the newest product under its GAMER STORM brand, a low-profile cooler called GABRIEL. Seen below, DeepCool's creation measures 120 x 120 x 60 mm, it weighs 426 grams and features a copper base, an aluminum heatsinks, four copper heatpipes and a 120 mm Hydro Bearing fan operating at 900 ~ 1800 RPM (maximum sound output is 32.4dB(A)).

The GAMER STORM GABRIEL supports Intel LGA1156/LGA1155/LGA1150 and AMD FM2/FM1/AM3+/AM3/AM2+/AM2/940/939/754 processors (with a TDP of up to 100 W) and is expected to become available in November.

MSI Unveils the MS-98D3 Ultra Low-Profile Embedded Board

MSI, the leading brand of embedded computers recently released a new Mini-ITX embedded board that focuses on advanced POS application. Powered by the 4th Gen Intel Core processor, MS-98D3 brings the POS system to a new level with the capability of multiple processing covering front-end retailing to back-end management at the same time, while keeps the system active and prompt at both ends.

The fast growth of information technology and network communication has made POS no longer in the stereotype of a stand-alone cash register in a store or restaurant, processing simple ordering and checkout works. With increasing POS system connected to network, wireless, or cellular communication to form a networked or even cloud-based POS system, high-end POS host is required by the market. The MS-98D3 is an embedded board designed in response to this demand.

Thermalright Releases the AXP-200 Low-Profile CPU Cooler

Thermalright has now rolled out its latest heat-dispersing creation, the HTPC-friendly AXP-200 CPU cooler. This low-profile cooler measures 150 (L) x 140 (W) x 60 (H) mm, it weighs 475 grams and features six 6 mm-thick heatpipes, a nickel plated copper base, an adjustable fan mount, and a 150 mm fan operating at 700 to 1300 RPM (maximum sound level is 30.6dBA).

The AXP-200 supports Intel LGA775/1156/1366/1155/2011/1150 and AMD AM2/AM2+/AM3/AM3+/FM1/FM2 processors and costs €49.99.

GELID Launches SlimHero Silent Low-Profile CPU Cooler

Thermal Solutions specialist GELID Solutions unveils the SlimHero which is a low profile CPU Cooler of its SILENT product line. The SlimHero features 4 sintered power heatpipes with a silent and slim 120 mm fan. The copper heatpipes ensure maximum heat transfer from CPU to the aluminum fins. The heatsink is built in a unique shape to lower the air flow resistance. The cooler can be mounted on each directions of the AMD socket.

The low profile cooler SlimHero is especially designed for compact PC cases where space can be the key problem. With a total height of 5.9 cm this cooler can fit almost all smaller cases and is able to cool up to 136W (TDP).

MSI Intros Low-Profile GeForce GT 640 Graphics Card with Three Display Outputs

MSI announced a new low-profile, single slot graphics card based on the GeForce GT 640 (model: N640GT-MD2GD3/LP). The card gives users the advantage of support for 3-display 3DVision Surround, for productivity. It packs 2 GB of DDR3 memory across a 128-bit wide interface, to aid with smooth display on those three monitors. It ships with 900 MHz core, and 1792 MHz memory (DDR). Display outputs include one each of dual-link DVI, HDMI, and D-Sub. Based on the 28 nm GK107 silicon, the GeForce GT 640 packs 384 CUDA cores. The new card is expected to be priced around US $90.

Thermolab Intros LP53 Low-Profile CPU Cooler

Korean PC cooling components maker Thermolab introduced LP53, a new low-profile CPU cooler. Measuring 100 x 94 x 53 mm (WxDxH), and weighing 410 g (owing to its material), the cooler is made of a dense copper fin stack that is arranged along the plane of the motherboard, to which heat drawn from a copper CPU base is conveyed by two 8 mm-thick copper heat pipes. The heatsink is ventilated by a 92 mm PWM-controlled fan, which spins at 1,000~2,000 RPM, with 16~27.1 dBA noise output. The cooler supports Intel LGA115x mount hole spacing, which makes it fit for LGA1156, LGA1155, and future LGA1150 socket types. It is priced around US $50.

HIS Announces Low-Profile Radeon HD 7750 iCooler Graphics Card

HIS announced the Radeon HD 7750 iCooler low-profile graphics card. The card is designed to provide mid-range DirectX 11 performance to slim form-factor (SFF) PCs, and HTPCs. The card is designed with a half-height PCB, but its active air cooler spans across two expansion slots in your system. To keep its temperatures in check, HIS opted for the older AMD reference GPU clock speed of 800 MHz. AMD recently updated that to 900 MHz. The memory is clocked at 1125 MHz (4.50 GHz GDDR5-effective).

The cooler uses a monolithic aluminum heatsink which cools the GPU, VRM, and memory chips on the obverse side of the PCB. The heatsink is ventilated by two 40 mm fans. HIS claims that the cooling solution has its noise output under 28 dBA. Display connectors include dual-link DVI, HDMI 1.4a, and D-Sub. HIS includes low-profile brackets with the card.

PowerColor Launches its Single Slot Low-Profile Radeon HD 7750 Graphics Card

PowerColor launched the world's first single-slot + low-profile graphics card based on the Radeon HD 7750, the PowerColor HD 7750 LP. The card relies on a compact air-cooler, which uses a dense hive of aluminum fins, ventilated by a 40 mm lateral-flow fan to cool the 1.5 billion transistor GPU. The card draws power from the PCI-Express slot, and uses high-grade VRM components (such as CPL-made chokes, LFPAK MOSFETs, etc.,) to condition power at minimal board footprint.

The card doesn't compromise on clock speeds, and ships with 800 MHz GPU and 1125 MHz (4.50 GHz GDDR5 effective) memory clock speeds. Built on the 28 nm "Cape Verde" silicon, the Radeon HD 7750 packs 512 Graphics CoreNext stream processors, 32 TMUs, 16 ROPs, and a 128-bit wide GDDR5 memory interface, holding 1 GB of memory. The display connectors on PowerColor's card include one each of dual-link DVI, HDMI 1.4a, and D-Sub (detachable). The card's accessories include a low-profile bracket. PowerColor did not reveal pricing.

Sapphire Squeezes Radeon HD 7750 Down to Single-Slot Low-Profile

What you might pass away for a bare entry-level graphics card at first glance, could end up being Sapphire's new Radeon HD 7750 single-slot low-profile graphics card. The design is a beneficiary of 28 nm "Cape Verde" silicon, which is found to have good-enough temperatures on its reference-design board. The card is ideal for mini-ITX systems. It relies entirely on the PCI-Express slot for power, and uses a 2+1+1 phase VRM, which utilizes high-grade driver-MOSFETs on its GPU phases.

The card sticks to AMD reference clock speeds of 800 MHz core, with 1125 MHz (4.50 GHz effective) memory. It packs 1 GB of GDDR5 memory over a 128-bit wide memory interface. The GPU packs 512 Graphics CoreNext stream processors. Display outputs include one each of dual-link DVI, mini-DisplayPort, and mini-HDMI. Adapters converting them to standard-size connectors, and a low-profile bracket will come included.

Noctua Presents the NH-L12 Low-Profile CPU Cooler

Noctua today presented its new NH-L12 low-profile cooler for Small Form Factor cases and HTPC environments. The NH-L12 features a flexible NF-F12 (120 mm) / NF-B9 (92 mm) dual PWM fan setup that can be configured either for full performance in dual fan mode or extra-low profile (66 mm) with the top fan removed.

"The industry trend towards Small Form Factor and Home Theatre PCs is well-established, but there's still a lack of suitable high-quality quiet CPU coolers", explains Mag. Roland Mossig, Noctua CEO. "Building a powerful PC always requires a capable CPU, which in return demands a competent cooling solution. But who wants his HTPC to sound like a jet engine? This is precisely where the NH-L12 steps in."

HIS Unveils New Low-Profile Radeon HD 6670 Graphics Card

Hightech Information System (HIS) today unveiled their first twin-fan cooler equipped graphics card range, the HIS 6670 Fan 1GB. Low Profile: Ideal for Media Centers & Home Theater PCs.

Home Theater PC users, looking for that extra bit of cooling to give their system an extra edge, will be delighted with the model’s double airflow allowing for expanded cooling efficiency and heat dissipation. The HIS 6670 Fan is another excellent choice within HIS’ low profile GPU range for home entrainment enthusiasts looking to build their personal bespoke Home Theater or Media Center PC.

Noctua Displays New Compact, Low-Profile CPU Cooler Prototype

Noctua displayed a new low-profile, top-flow CPU cooler prototype, that's capable of low-profile mode with a height of just 66 mm, making it fit for certain slim form-factor ITX cases. The prototype uses a C-type top-flow heatsink, similar to the NH-C14, only much smaller, and thinner. It uses four heat-pipes to convey heat to a dense aluminum fin array. Unlike on the NH-C14, this prototype uses a dual-fan design in which the bottom fan is smaller. While the top-fan is a 120 mm Focused Airflow, while the bottom fan is a 92 mm NF-B9. The cooler can be run in dual-fan mode with both fans installed (cooler height will be 91 mm), or single-fan low-profile mode with the top fan removed (cooler height of 66 mm). A "high-clearance mode" with the bottom fan removed also looks possible.

Scythe Announces Kozuti Top-Flow Low-Profile CPU Cooler

The Japanese manufacturer Scythe Co. Ltd. (Tokyo, Japan) officially announces the availability of new low profile Top-Flow CPU Cooler Kozuti. Unlike regular coolers, the fan is positioned below the fins, reducing the total height of the cooler significantly.

The Kozuti CPU Cooler is equipped with a total of three 6mm heat pipes. Applying the newly developed S.F.M.S (Stealth Fan Mounting Structure) the heatpipes are arranged in a low profile oval structure. This enables to provide space for the 80 x 80 x 10mm fanmotor in between the oval structure and below the fins, making it merely 40mm in height. This positions the cooler to be our most compact and slim cooler fit for HTPCs and slim chassis systems. Active cooling is achieved by the 80 x 80 x 10 mm slim fan the speed of 800 rpm (± 30%) - 3.300 rpm (± 10%), generating an air flow of 6.0 CFM ~ 24.82CFM = 10.2 m³ / h ~ 42.2 m³ / h at a noise level of 8.2 ~ 32.5 dBA.

Sparkle Intros GeForce GT 520 1GB/2GB Low-Profile Graphics Cards

SPARKLE Computer Co., Ltd., the professional VGA card manufacturer and supplier, today announced the SPARKLE GeForce GT 520 1GB/2GB DDR3 Low Profile Graphics Card, bringing DX11 support and HD video experience to entry level users. Modern DX11 games and 3D applications demand more graphics performance than ever before and integrated graphics simply aren’t good enough. With full DirectX 11 and full Shader Model 5 support, the SPARKLE GeForce GT 520 1GB/2GB DDR3 Low Profile Graphics Card packs 48 CUDA cores ! If you want to play popular DX11 games like Dirt2, Metro 2033, Lost Planet2, Battlefield: Bad Company2, etc, the SPARKLE GeForce GT 520 1GB/2GB DDR3 Low Profile Graphics Card is an essential addition to your entry level PC.

Sparkle Announces Low-Profile GeForce GTS 450 Graphics Card

SPARKLE Computer Co., Ltd., the professional VGA card manufacturer and supplier, today unveils SPARKLE GeForce GTS 450 Low Profile Graphics Card, an ideal product for home theater enthusiasts and gamers. Exclusively on the SPARKLE GeForce GTS 450 Low Profile Graphics Card, users get the best cooling performance with Axial Fan design.

This design features dual axial fans which bring greater amount of wind volume. The unique airflow guide technology can bring the heat generated by GPU to the outside smoothly. Thanks to the axial fan design, now users can get lower working noise from the SPARKLE GeForce GTS 450 Low Profile Graphics Card, making it a ideal products for home theater enthusiasts who seek quiet operation environment.

Point of View Intros its Low-Profile GeForce GT 430 Graphics Card

Point of View kicked of its GeForce GT 430 lineup with a custom-design graphics card. The card sticks to NVIDIA's reference design as far as the PCB goes, but uses a [seemingly] more cost-effective GPU cooling solution. The card is low-profile, and makes extra-room for a D-Sub connector with its full-height bracket on. Other connectors include DVI and HDMI. Like every other GeForce GT 430, Point of View's card is based on the 40 nm GF108 GPU, it is DirectX 11 compliant, and has 96 CUDA cores, a 128-bit wide DDR3 memory interface holding 1 GB of memory, and clock speeds that stick to NVIDIA's reference speeds: 700/1400/1600 MHz (core/shader/memory). A slightly faster variant based on the same exact design is also available, it just has the memory clocked 200 MHz higher. Expect standard pricing for this card.

Gainward GTS 450 GOOD Low-Profile Card Pictured, Taken Apart

Palit's subsidiary Gainward has a low-profile GeForce GTS 450 graphics card in the making, much like Palit's card. Both these are yet to ship to major markets. In the mean time, Korean website Brainbox.com did a picture preview of Gainward's card, called GTS 450 GOOD Low-Profile. The pictures reveal a neatly-designed PCB and cooler assembly modeled along the lines of high-end graphics cards in which hot air is directed right out of the case. The assembly includes a blower, a shroud that directs air-flow, a large heatsink with densely packed aluminum fins that channel air through, and a heatsink over the MOSFETs.

The PCB seats the GF106 GPU right in the middle. While it looks long, it's only because the PCB is half-height to give that illusion. In reality the PCB is 7.4" long, not longer than the full-height NVIDIA reference PCB, and should fit in most SFF cases that have two expansion slots. The PCB uses a simple 4-phase VRM driven by an ON-Semi controller, there are four GDDR5 memory chips on either sides of the PCB, totaling 1 GB. The clock speeds stick to NVIDIA reference: 783/1566/900(3600) MHz, display outputs include and are limited to one DVI and an HDMI. Power is drawn in from one 6-pin PCI-E power connector facing downwards à la Radeon HD 4870 X2. Gainward's card may charge a slight premium over the full-height cards, for the convenience it offers. More pictures at the source.

Source: BrainBox.co.kr
Return to Keyword Browsing