News Posts matching "MLC"

Return to Keyword Browsing

Green House Unveils 2.5-inch, 1.8-inch Phison-Powered Solid State Drives

Japanese company Green House has today announced multiple solid state drives based around controllers from Taiwan-based Phison Electronics. Among the models presented are the GH-SSD32B Series (2.5-inch form factor / SATA 6.0 Gbps interface), the GH-SSDP2A Series (2.5-inch / PATA) and GH-SSD21A Series (1.8-inch SATA 3.0 Gbps).

The GH-SSD32B line includes 60 GB, 120 GB, 240 GB and 480 GB units that utilize MLC NAND Flash memory and deliver speeds of up to 520/420 MB/s (reading/writing). The GH-SSDP2A SSDs reach 80/60 MB/s (reading/writing) and come in 16 GB, 32 GB, 64 GB, 128 GB and 256 GB flavors, while the GH-SSD21A family tops 200/120 MB/s (read/write) and goes from 32 GB to 128 GB. All these SSDs have a three-year warranty and are set to become available at the end of this month.

OCZ Announces New Vector 150 Solid State Drive Series

OCZ Technology Group, Inc., a leading provider of high-performance solid state drives (SSDs) for computing devices and systems, today announced its new Vector 150 SATA III SSD Series that utilizes the latest cutting-edge 19 nanometer (nm) NAND flash process geometry and an in-house controller design that shatters barriers by delivering OCZ's highest performing SATA III solid state drive series to date. At the forefront of Vector 150 innovation is OCZ's proprietary Barefoot 3 controller which was designed completely in-house by the Company's hardware and firmware teams to enable full design control over the product roadmap while delivering high performance flash-based storage, enhanced endurance, and a host of differentiated features for laptop, desktop and workstation applications.

Building off the success of the original Vector SSD Series, the Vector 150 SSD Series implements industry-leading performance by delivering consistent, sustained speeds over time regardless of whether the data is in compressed or uncompressed formats. It provides superior speeds across all capacities to dramatically accelerate gaming, content creation, and multimedia applications, supporting read bandwidth of up to 550 MB/s, write bandwidth of up to 530 MB/s, 4K random read speed of up to 100,000 input/output operations per second (IOPS), 4K random write speed up to 95,000 IOPS and sustained 4K random write performance of 26,000 IOPS.

Apacer Launches Leading Industrial-grade CFast 2.0 Memory Cards

Since the CompactFlash Association released the specification of CFast 2.0, Apacer has invested actively in R&D and taken the lead to roll out the first industrial-grade SATA 3.0 (6Gb/s) high-speed transmission interface CFast 2.0 memory card around the globe. Its sequential speed is up to 310/240 MB/sec, which doubles the speed of its predecessor. Besides featuring a 2-Channel bidirectional structure, the CFast 2.0 adopts Toggle DDR 2.0 NAND Flash, which brings its performance to a higher level.

Jeff Lin, Embedded Application Business Unit Director of Apacer, suggested that, "Except that Apacer CFast 2.0 memory card is upgraded to double performance and speed, in order to meet the needs of harsh environment of industrial application and corporate cost-effectiveness, Apacer provides customers with choices between highly-durable SLC chip or highly cost-effective MLC chip. Both chips are resistant to temperature change, vibration and shock in actual environment. Each kind of chip has a capacity of 4 GB~32 GB and 16 GB~128 GB respectively, with dimensions of 42.8 mm x 36.4 mm x 3.6 mm and an adoption of (7+15) pin connector. Support for DEVSLP (Device Sleep) power mode enables them to switch into a low power state on standby mode so as to save power for companies."

KINGMAX Launches SME Xvalue for HDD-to-SSD Upgrade

For today's PC users, high-performance, high-quality SSDs are increasingly the preferred choice. KINGMAX, a premium memory and Flash module manufacturer that serves the world market, is proud to introduce SME 32/35, the latest additions to its SME Xvalue SSD Series. The SME SATA III2.5"SSDs make a timely debut as many must be considering a replacement or upgrade of their HDDs. For most end users, performance is hardly the ultimate determinant for choosing between the two storage devices, empirical studies show. But they know SSDs are faster than HDDs and that the former does speed up their system both during booting and in operation.

An exceptionally attractive cost-performance ratio justifies SME as a bargain. This is especially the case with those who would rather go for a partial refresh as an across-the-board upgrade of their existing old devices seems hardly warranted. Pitted against comparable HDD counterparts, it stands out with an ultra-low cost per IOPS and extraordinary operational efficiency on the same measure of power consumption.

Apacer Announces SATA SLC-Lite SSD Solutions

According to market research firm IDC, shipments of tablet PCs have overtaken PCs for the first time in 2013. Mobile devices are deeply favored by consumers, among which smartphones and tablet PCs priced under $350 each account for 68% of shipments of all internet devices. Hence, the next-generation IT products of 2014 featuring lightness, compactness, durability, and merited efficiency will be more popular with low prices. Therefore, how to achieve low-cost production while improving specifications becomes the common concern for departments of product design and purchase.

SSD NAND flash has always been the key character in IT products, while SLC has been reputed for its quality, efficiency and durability. However, considering the cost, only MLC should be acceptable in the industrial computer. The market expects a product with similar quality to SLC but with the price of MLC. To satisfy long-term needs of customer, Apacer officially launches SATA SLC-lite series. The product boasts a transmission speed 1.5 - 3 times faster than MLC, close to that of SLC, and 10 times longer service life than MLC with half price of SLC! With the highest SSD C/P value, SATA SLC-lite is the optimal solution for the upgrade of 2014 NAND flash product.

Plextor Reveals M6 SSD Prototype and M.2 Form Factor Drives at IFA

Plextor (www.plextor.com), leading developer and manufacturer of high-performance digital media and storage equipment, gave a sneak preview of the upcoming M6 Drive and M.2 form factor SSD solutions at the IFA show in Berlin.

Plextor M6 Series
The M6 is the anticipated successor to the Plextor M5 Series. The M6 is a 2,5", 5 mm solid state drive for the consumer market and is scheduled to come in the following versions: a version for the high performance segment, the Pro version; and a version to cater the needs of average computer users, the S version. The M6 features the next generation of Plextor's proprietary TrueSpeed technology that works in tandem with the Marvell 88SS9187 controller for enhanced performance and reliability.

GOODRAM Announces the C Series Solid State Drives

Performance, speed, reliability and last but not least, a decent price are the most sought-after characteristics of every SSD from the user standpoint. Following these criteria, Polish manufacturer of memory modules and SSDs has just launched an all-new lineup for their in-house manufactured SSDs named GOODRAM SSD C Series.

On the occasion of Goodram brand 10th anniversary, Wilk Elektronik SA the company behind the brand, has just launched an all-new lineup of Goodram SSD drives. Goodram SSD C Series are consumer-grade drives dedicated for demanding users who are looking for a combination of performance and value.

Corsair Unveils the Force LS Series Solid State Drives

Corsair has today announced a new addition to its solid state drive offer, the Force LS Series models which are powered by a Phison controller and make use of Toshiba MLC NAND Flash memory. These SSDs have a 2.5-inch form factor (7 mm high), SATA 6.0 Gbps connectivity, TRIM support, and deliver sequential read/write speeds of up to 560/535 MB/s.

The Force LS SSDs are backed by a three-year warranty and come in 60 GB ($70), 120 GB ($110) and 240 GB ($200) capacities.

MyDigitalSSD Announces Super Cache 2 mSATA SSD with HybriDisk Cache Software

MyDigitalSSD delivers where others cannot-Our all-new Super Cache 2 SSD is the world's fastest low density Cache Drive and/or Boot Drive that delivers up to a 50X boost in performance over a standalone HDDstarting at less than the cost of a couple of Blu-Rays. Get a 24GB for $39.99, 32GB for $42.99, 64GB for $62.99, or 128GB for $99.99.

For more details, including real-world benchmark testing using a Lenovo ThinkPad X220, visit this page. Super Cache 2 SSDs are now currently available for preorder here.

Samsung Introduces World's First 3D V-NAND Based SSD for Enterprise Applications

Samsung Electronics Co., Ltd., the world leader in advanced memory technology, today introduced the first solid state drive (SSD) based on its industry-leading 3D V-NAND technology. Samsung announced its new SSD, designed for use in enterprise servers and data centers, during a keynote at the Flash Memory Summit 2013 here.

"By applying our 3D V-NAND - which has overcome the formidable hurdle of scaling beyond the 10-nanometer (nm) class*, Samsung is providing its global customers with high density and exceptional reliability, as well as an over 20 percent performance increase and an over 40 percent improvement in power consumption," said E.S. Jung, executive vice president, semiconductor R&D center at Samsung Electronics and a keynote speaker at the Flash Memory Summit. "As we pioneer a new era of memory technology, we will continue to introduce differentiated green memory products and solutions for the server, mobile and PC markets to help reduce energy waste and to create greater shared value in the enterprise and for consumers."

Apacer Introduces 22PIN SATA 6 Gb/s High-Speed Modular SSD

The pursuit of speed for IT products is always endless. Therefore, Apacer devotes to breakthroughs and innovation in technology and is fully prepared to provide the high-speed storage products to customers before the R & D of the next-generation product. Apacer launches the new generation of SDM5 (SATA Disk Module), which adopts the SATA 3 (6 Gb/s) high-speed transmission interface, Toggle DDR 2.0 NAND Flash, as well as the specifically designed 2-Channel bidirectional structure. The sequential read/write speed reaches 315/145 MB/Sec and provide an excellent performance of high speed read, all of which enable the SDM5 to be one of the fastest storage solutions in the next generation IT products.

Apacer SDM5 connector adopts standard 7-pin Signal and 15-pin Power male SATA connector. To provide greater flexibility, Apacer rolls out two new designs - perpendicular (at 90°) and parallel (at 180°) - for 22-pin SATA connectors.

ASUS ROG Launches RAIDR Express PCI Express-based SSD

ASUS ROG today announced RAIDR Express, the first PCI Express-based SSD in the world with a DuoMode feature that allows it to work with either legacy (traditional) or modern UEFI BIOS. Aimed at hardcore gamers and PC enthusiasts demanding a faster and more reliable computer experience, RAIDR Express combines the best compatibility and great performance with incredible durability.

With 240 GB capacity, sequential 830 MB/s read and 810 MB/s write speeds, and bundled with tons of features that maintain the high-speed performance and extend the lifespan, RAIDR Express is made for real speed-demons. Boasting the gorgeous ROG red and black design with double-sided metal shielding and an incredible 620,000 hours mean time between failure (MTBF) to ensure quality, RAIDR Express is built to last.

Micron Unveils 16-Nanometer Flash Memory Technology

Micron Technology, Inc., today announced that it is sampling next-generation, 16-nanometer (nm) process technology, enabling the industry's smallest 128-gigabit (Gb) multi-level cell (MLC) NAND Flash memory devices. The 16 nm node is not only the leading Flash process, but it is also the most advanced processing node for any sampling semiconductor device. It solidifies Micron's leadership position in storage technology development and delivers on the company's vision to provide the most advanced semiconductor solutions.

Micron's 128 Gb MLC NAND Flash memory devices are targeted at applications like consumer SSDs, removable storage (USB drives and Flash cards), tablets, ultrathin devices, mobile handsets and data center cloud storage. The new 128 Gb NAND Flash memory provides the greatest number of bits per square millimeter and lowest cost of any MLC device in existence. In fact, the new technology could create nearly 6 TB of storage on a single wafer.

ADATA Also Shows Off XPG SX920 Series Consumer SSDs

In addition to the SX1000 and SX2000 series enterprise SSDs, ADATA showed off its latest consumer SSDs, under the XPG SX920 banner. Built in the 7 mm-thick 2.5-inch form-factor with SATA 6 Gb/s interface, and available in 128 GB, 256 GB, and 512 GB capacities, these drives are based on a Marvell-made controller, driving 19 nm MLC NAND flash. These drives offer up to 530 MB/s of sequential reads, up to 480 MB/s sequential writes, and up to 80,000 IOPS 4K random writes. Most common client SSD features such as TRIM, NCQ, and SMART. The drives are backed by 3-year warranties.

ADATA Shows Off SX2000 and SX1000 Enterprise SSDs

ADATA showed off a new high-performance server-grade SSD, the SX2000. Built in the 2.5-inch form-factor, this drive features a PCI-Express 2.0 x4 interface (a cable runs to a PCIe riser card). It is driven by an LSI-SandForce SF-8639 controller, which is a single-chip solution that connects to the host over PCI-Express, and appears to the operating system as ATA AHCI controller, with one drive connected to it. The chip features nearly more than double the ONFI channels as an SF-2281, which reflects on the drive's advertise performance numbers: up to 1,800 MB/s reads with up to 1,800 MB/s writes; up to 200,000 IOPS 4K random reads. The controller supports all modern enterprise SSD features, including TRIM, DEVSLP support, and SMART. It ships in 100 GB, 200 GB, 400 GB, 800 GB, and 1,600 GB variants. The latter was up on display.

ADATA also showed off its SX1000 enterprise SSD, which features a more modest SATA 6 Gb/s interface, an LSI SandForce SF-2500 or SF-2600 series controller, sequential performance numbers of up to 550 MB/s reads with up to 500 MB/s writes, up to 75,000 IOPS 4K random reads/writes, can work as DAS, and most modern enterprise features. This drive will be available in 100 GB, 200 GB, and 400 GB capacities, the 200 GB variant was on display. It's unclear which kind of NAND flash the two drives use, but we're guessing it's high-endurance MLC NAND. Both offer 5-year warranties.

SanDisk Advances Its Industry-Leading Manufacturing Technology

SanDisk Corporation, a global leader in flash memory storage solutions, today announced it has begun customer sampling of flash memory products based on its industry-leading 1Ynm process technology, which represents its second generation 19 nanometer (nm) manufacturing technology. SanDisk's achievement of this breakthrough in semiconductor manufacturing takes its memory cell size from 19nm-by-26nm to 19nm-by-19.5nm, delivering a 25 percent reduction of the memory cell area and allowing SanDisk to continue leading the industry in building smaller, more powerful flash memory products.

SanDisk's second-generation 19nm memory die uses the most sophisticated flash memory technology node to-date, including advanced process innovations and cell-design solutions. SanDisk's All-Bit-Line (ABL) architecture with proprietary programming algorithms and multi-level data storage management schemes help yield multi-level cell (MLC) NAND flash memory chips that do not sacrifice performance or reliability. In addition, SanDisk's three bits per cell X3 technology, implemented in the second-generation 19nm node will deliver the lowest-cost flash solutions to address multiple growing end-markets for flash memory.

Transcend Announces MSM610 mSATA SSD

Transcend Information, Inc. (Transcend), a leading manufacturer of industrial-grade products, today announced the release of its SATA II 3Gb/s MSM610 mSATA mini solid state drive (SSD). With its diminutive yet robust form factor, impressive sequential read/write transfer speeds, and a host of reliability features, the MSM610 mSATA mini SSD delivers solid state performance and durability to today's advanced mobile devices such as tablet PCs, Ultrabooks, and other embedded storage applications.

Fully compliant with the SATA II 3Gb/s specification and built with industry-leading toggle-mode MLC NAND flash chips, the MSM610 mSATA mini SSD boasts blazing fast sequential read and write speeds up to 245 and 48 MB/s respectively. This outstanding performance translates into reduced boot up and data transfer times, superior application launch speed, and enhanced overall system responsiveness; especially useful for dual-drive notebooks and Ultrabooks taking advantage of both the high-speed MSM610 mSATA mini SSD and a high capacity hard disk drive.

Mach Xtreme Introduces FX 256 GB USB 3.0 Flash Drive

Mach Xtreme Technology Inc., a worldwide leader in top performance, high reliability and user-friendly designed PC components, adds 256GB model to expanding FX USB3.0 flash drives series today. This addition will join existing 32 GB, 64 GB and 128 GB models.

With its advanced reliability and spacious capacity, the FX 256 GB USB Flash Drive gives user easy and fast way to transfer and back-up large files. MX-FX models are compliant with next-generation USB 3.0 specifications and are optimized for newer PCs with USB 3.0 ports. The extensive compatibility testing ensures complete compatibility with ASUS mainboards and notebooks, offering consumers full USB 3.0 usability.

TDK Unveils SDG4A Series 2.5-inch SATA SSDs

Storage legend TDK launched the SDG4A line of entry-level consumer SSDs in the 2.5-inch SATA form-factor. Available in 64 GB, 128 GB, and 256 GB capacities, the drives use TDK's in-house GBDriver RS4 processor, and MLC NAND flash. Featuring SATA 3 Gb/s interface, the drives offer transfer speeds as high as 180 MB/s reads, with 130 MB/s writes. Common SSD features such as TRIM, ECC, and read-retry. Production of the drives will begin later this month.

Source: Hermitage Akihabara

Micron Unveils New PCIe I/O Accelerator

Micron Technology, Inc. today announced a new PCIe all-flash I/O accelerator to improve overall performance in enterprise servers, appliances and storage platforms. The new Micron P420m combines consistent performance with the inherent power efficiency of an all-flash system to deliver improved economics for enterprise data centers. The P420m accelerates performance of today's demanding data center applications, including online transaction processing (OLTP), data warehousing and virtualization.

Ultimately, Micron's P420m ends the wait game for digital data. It features ultra-low latency performance that enables fast and predictable response times to information frequently used in data center environments. When tested against competing PCIe solutions in a MySQL server running an OLTP benchmark, the P420m is the fastest and most consistent performer, delivering more than 3,200 web server requests per second. It handily manages online requests during peak traffic times, improving the overall end-user experience.

Smart Storage Systems Intros First SAS SSD with 19 nm MLC Flash and 2 TB Capacity

SMART Storage Systems, an innovative enterprise solid-state drive (SSD) technology provider, today announced the new Optimus Eco, the first Serial Attached SCSI (SAS) 6Gb/s SSD on the market to leverage 19 nm multi-level cell (MLC) Flash. Continuing the company's effort to usher in a new era of Flash storage, and anticipating the changing needs of enterprise data centers, SMART Storage Systems' new Optimus Eco SSD represents the industry's best combination of performance, capacity, endurance and cost in an enterprise-class 2.5-inch drive.

Forced to do more with less, many organizations are choosing to build their own hyperscale architectures by combining best-in-class hardware and software to lower costs and meet growing data center demands. In addition, looking to control maintenance costs, data center managers are seeking the highest-capacity drives to pack more capacity into a rack, resulting in the ability to reduce their storage footprint. In fact, Gartner estimates that in 2016 the average capacity of an SSD deployed in enterprise storage and server environments will be more than 1.1 TB. When combined with SSDs that can provide the endurance necessary to support write-intensive applications with cost-effective 19 nm MLC Flash, the result is a dramatic reduction in storage total cost of ownership (TCO).

Intel Expands SSD 335 Series with 80 GB Variant

Intel expanded its performance-segment SSD 335 series with a new entry-level 80 GB variant (model: SSDSC2CT080AK5). It joins the 180 GB and 240 GB variants, and occupies a price-point around the 110€ mark (excl VAT), which makes it particularly pricey in comparison to 120 GB drives. SSD 335 combines an LSI-SandForce SF-2281 series controller with Intel-made 20 nm MLC NAND flash.

Intel didn't update the product sheet with details of the new 80 GB model, but its bigger siblings offer sequential speeds as high as 500 MB/s reads, with up to 450 MB/s writes. Built in the 9.5 mm-thick 2.5-inch form-factor, SSD 335 features SATA 6 Gb/s interface, and supports most standard consumer SSD features, including TRIM and NCQ. The drive should begin showing up on online stores worldwide, in both OEM (drive-only) and retail (includes bay-adapters and data migration software) trims.

ASUS ROG RAIDR Pictured Some More, Coming This May

First shown to crowds at this year's International CES event in January, ASUS' first enthusiast SSD, the ROG RAIDR, is heading toward a mid-May launch. A few more of its pictures and specs sheets were posted by SweClockers. As detailed earlier, the RAIDR is a compound SSD in the PCI-Express add-on card form-factor, with PCI-Express 2.0 x2 interface (supports x4, x8, and x16 slots). It uses two SandForce SF2281-driven SSD subunits striped in a hardware-abstract RAID 0 configuration. The subunits use Toshiba-made 19 nm MLC NAND flash chips, with 16 KB page size.

The ROG RAIDR supports TRIM command, NCQ and SMART, despite being a RAID 0-based SSD. It is bootable, and supports Windows 8 Secure Boot. Installing an operating system on the drive doesn't require any F6 drivers, as the controller masquerades as a standard AHCI controller and a single disk, with the subunits and their RAID 0 stripe completely abstract. This way, the drive can accept TRIM commands from the OS.

Samsung Mass Producing 10 nm Class High-Performance 128-Gbit 3-bit MLC NAND Flash

Samsung Electronics Co., Ltd., the world leader in advanced memory technology, announced today that it has begun mass producing a 128-gigabit (Gb), 3-bit multi-level-cell (MLC) NAND memory chip using 10 nanometer (nm)-class process technology this month. The highly advanced chip will enable high-density memory solutions such as embedded NAND storage and solid state drives (SSDs).

"By introducing next-generation memory storage products like the 128Gb NAND chip, Samsung is extremely well situated to meet growing global customer needs," said Young-Hyun Jun, executive vice president, memory sales & marketing, Device Solutions Division, Samsung Electronics. "The new chip is a critical product in the evolution of NAND flash, one whose timely production will enable us to increase our competitiveness in the high density memory storage market."

OCZ Vertex 5 SSD Series Detailed

OCZ is reportedly readying the 5th generation of its Vertex line of high-performance consumer SSDs. Vertex 5, as it's being called, could retake market positioning of being the company's flagship product, from its Vector series. The new lineup, which could consist of 128 GB, 256 GB, and 512 GB models, could be launched towards the end of May, 2013.

OCZ could use Vertex 5 to strengthen its lineup against Samsung, which appears to have captured the performance segment with its 840 and 840 Pro series, using aggressive pricing, particularly with 840 (non-Pro). Vertex 5 could be based on the same Barefoot 3 platform as Vector, with a few tweaks. It could integrate 20 nm MLC NAND flash. With the company engaged in legal tussles with some of its former investors, it could be interesting to see how the company competes with Samsung's pricing.

Source: NordicHardware
Return to Keyword Browsing