Jetart JACSH1

Jetart JACSH1

Performance, Value & Conclusion »

Introduction

From the manufacturer Jetart:
  • Delicate Welding Technique Applied
  • All-In-One VGA Cooling Kit
  • Super Bright LED Fan
  • Silent & High Performance Ball Bearing Fan
  • Compatible to all nVIDIA & ATi VGA cards
  • Extra 8 pcs Memory Heatsinks Included
Cooler Dimensions110.0 x 88.7 x 31.6mm
Fan Dimensions60 x 60 x 12mm
Heatsink MaterialCopper
Fan12V, 0.2A, 2.4W
Fan Speed3400 RPM
Weight320g
Compatible withNVIDIA:GeForce3 Ti 200, GeForce3 Ti 500, GeForce4 MX 420, GeForce4 MX 440, GeForce4 MX 440 SE, GeForce4 MX 440 8X, GeForce4 MX 460, GeForce4 Ti 4200, GeForce4 Ti 4200 8X, GeForce4 Ti 4400, GeForce4 Ti 4600, GeForce4 Ti 4800, GeForce FX 5200, GeForce FX 5500, GeForce FX 5600, GeForce FX 5600 ULTRA, GeForce FX 5700 LE, GeForce FX 5700 ULTRA, GeForce FX 5900, GeForce FX 5900 XT, GeForce FX 5950 ULTRA, GeForce 6600, GeForce 6800, GeForce 6800 ULTRA
ATI:RADEON 9000, RADEON 9000 PRO, RADEON 9200, RADEON 9200 PRO, RADEON 9500, RADEON 9550, RADEON 9600, RADEON 9600 SE, RADEON 9600 PRO, RADEON 9600 XT, RADEON 9700, RADEON 9700 PRO, RADEON 9800 PRO, RADEON 9800 XT, X300, X600, X700, X800, X850


Packaging



Box contents:
  • VGA cooler with fan and screws
  • Backside mounting clip
  • Thermal Paste
  • Instruction manual
  • Eight Ramsinks
  • Power Cable


Some minor ridges from production are visible on the base, they do not effect heat transfer as performance testing shows. On the "knife test" there is very little light shining through. Except for the hole in the center.



The whole cooler is made from polished copper - blingbling. Very beautiful.



For protection, the heatsink base has a sticker on it, a good idea. However, the glue Jetart uses does not stay on the sticker. A little bit remains on the cooler base as following pictures show.



I also wonder what the little hole in the center of the heatsink base is used for.



A blue LED is lighting up the fan when it is running.

Installation

Installation is extremely easy and can be done in a few minutes.



A minor issue I spotted, is that the diameter of the through-PCB mounting screws is rather small, so the screw can move in the hole. This review shows that this has absolutely no effect on performance or contact quality, I just wanted to mention it because the first time you think "did I install something wrong?" - This is not the case. Everything is perfectly fine.



The included Ramsinks look like copper but are made from copper-painted aluminum as you can see from the scratched away paint near the corner.

Page:
Next Page »Performance, Value & Conclusion