NZXT Tempest EVO

A Closer Look - Outside

The overall design of the Tempest EVO has not changed much at first sight. The front edges that run along both sides are still there, the window shape has remained the same and the I/O and fan placement is an exact copy of the original. However, the chassis has plenty of new additions and modifications.


Looking at it head on, there are no differences to the Tempest. You get nine 5.25 inch bays along the entire front of the chassis. Turning the case around, we can clearly see the first major difference. NZXT has chosen to color the entire case structure and interior black. NZXT has also changed a few smaller aspects, which we will get into in a second.


While the one side of the chassis does not appear to have changed, having a window and side fan, NZXT has created an extrusion on the solid side. This shape looks like the window on the other side and is a nice little design addition.


As for the fans, they have changed as well. Each of them have black frames and a larger number of white blades compared to the amount of black ones on the original Tempest. This further adds to the overall look of the Tempest EVO and certainly a welcome change.


You will find the I/O on the top of the chassis, angled upward slightly. Two USB 2.0, the usual audio connectivity, an eSATA port and the power & reset button an all be found in this area. This is great for those who put the chassis under the table, but a bit cumbersome if you place the computer on top your desktop.


Focusing on the rear, there are a few smaller changes as well. On the bottom, the PSU bay does not appear to have changed much from the outside. Above that are the seven expansion slots. These are now protected with black, reusable, mesh covers. Right next to these are four large openings for water cooling. This is a set up from the two smaller ones we have seen on the Tempest. All the way on top you will find another 120 mm fan with white blades next to the opening for the mainboard backplate.


While the PSU location remains the same in the Tempest EVO compared to the original Tempest, there is an opening on the case underside on the EVO, letting fresh air enter the chassis. It is covered by a simple dustfilter, to stop any dirt from entering the interior of the case and ultimately your power supply.