Silverstone Strider Plus ST50F-P 500 W

Silverstone Strider Plus ST50F-P 500 W

Packaging, Contents & Exterior »

Specifications

Silverstone ST50F-P Features & Specs
Max. DC Output500W
PFCActive PFC
Efficiency80Plus Bronze
Operating temperature10°C - 40°C
ProtectionsOver Voltage Protection
Under Voltage Protection
Over Current Protection
Over Power Protection
Short Circuit Protection
Cooling120 mm Fan (18 - 33dBA)
Dimensions150 mm (W) x 86 mm (H) x 140 mm (D)
Weight1.8 kg
ComplianceATX12V v2.3, EPS 2.91
Warranty3 years
Price at time of review79.99$

The PSU features all protections besides Over Temperature Protection (OTP). Maximum operating temperature is only 40°C but since ATX spec recommends 50°C we will crank up the temperature inside the hot box.

Silverstone ST50F-P Power Specs
Rail3.3V5V12V15VSB-12V
Max. Power24A20A34A2.5A0.3A
120W408W12.5W3.6W
Total Max. Power500W

Cables & Connectors, Power Distribution



The PSU is equipped with two PCIe connectors, one 6+2 pin and one 6 pin. Cable length is sufficient and distance between connectors is the recommended (150 mm). The ATX connector uses 16 AWG wires while all other connectors use 18 AWG. Our only objection is the limited number of peripheral connectors (4 pin Molex). We would like to see at least five of them.

Since this PSU features a single +12V rail we do not have anything to say about its power distribution.
Page:
Next Page »Packaging, Contents & Exterior