ZOTAC GeForce GT 430 1 GB

ZOTAC GeForce GT 430 1 GB

Performance Summary »

Fan Noise

In the past years users would accept everything just to get more performance. Nowadays this has changed with people being more aware of the fan noise and power consumption of their graphic cards.
In order to properly test the fan noise a card emits we are using a Bruel & Kjaer 2236 sound level meter (~$4,000) which has the measurement range and accuracy we are looking for.


The tested graphics card is installed in a system that is completely passively cooled. That is passive PSU, passive CPU cooler, passive cooling on the motherboard and Solid-State HDD.
This setup allows us to eliminate secondary noise sources and test only the video card. To be more compliant with standards like DIN 45635 (we are not claiming to be fully DIN 45635 certified) the measurement is conducted at 100 cm distance and 160 cm over the floor. The ambient background noise level in the room is well below 20 dbA for all measurements. Please note that the dbA scale is not linear, it is logarithmic. 40 dbA is not twice as loud as 20 dbA. A 3 dbA increase results in double the sound pressure. The human hearing is a bit different and it is generally accepted that a 10 dbA increase doubles the perceived sound level.

ZOTAC's cooler implementation leaves much to desire. Especially in idle the card is more noisy than it should be, given its performance. Also in load it is far from being the quietest, considering NVIDIA was talking about passively cooled cards in their briefing. The heat output of the GPU is certainly low enough to enable such a design, especially when you use a full-size PCB like ZOTAC does.

At least the fan noise is substantially reduced vs. the last generation parts GT 220 and GT 240.

Page:
Next Page »Performance Summary