Xigmatek rolled out the Janus low-profile CPU Cooler. It uses a C-type aluminum fin-array design. From a mirror-polished nickel-plated copper base, six 6 mm-thick heat pipes convey heat to an aluminum fin-stack arranged along the plane of the motherboard. It is ventilated by two fans arranged in a top-flow push-pull configuration. The top fan is a 10 mm-thick 120 mm spinner, while the bottom one is a 15 mm-thick 80 mm one. The bigger fan spins at 800-1200 RPM, pushing up to 38.42 CFM of air; while the smaller one does around 2000 RPM, pushing 13.53 CFM. Measuring 120 x 110 x 45 mm (WxDxH), the Janus weighs about 430 g. It supports most modern CPU socket types, including Intel LGA1150, LGA1155, LGA1156, LGA2011, LGA1366, and LGA775; and AMD AM3+/AM3/AM2+/AM2, FM2/FM1.

Noctua today presented a new revision of its much acclaimed NH-U12DX and NH-U9DX quiet CPU coolers for Intel Xeon workstations and servers. The new i4 models support LGA2011 (both Square and Narrow ILM), LGA1356 and LGA1366 based Xeon platforms and now come with PWM fans for automatic speed control. Fitted with the professional SecuFirm2 mounting system and bundled with Noctua's industrial-grade NT-H1 thermal compound, the NH-U12DX i4 and NH-U9DX i4 form complete premium quality packages for quietly cooling Xeon based workstations and servers.

"Builders of quiet workstations and servers still have trouble finding quality cooling solutions for Intel's LGA2011 socket with Narrow ILM mounting", explains Mag. Roland Mossig (Noctua CEO), "so we've decided to update our DX line of coolers to work with both Square ILM and Narrow ILM based LGA2011 platforms. At the same time, we've added PWM control and switched the U12 version to the new, slimmer layout of the NH-U12S, which not only provides better performance but also ensures easier access to the RAM slots, which was another long time request from our industry partners."

Deepcool, the leading manufacturer of desktop CPU coolers, Notebook coolers, VGA coolers and DC case fans, has announced the third member of the MULTICORE notebook cooler family?MULTICORE X8. Sporting a large, high quality aluminum panel and 4 x10cm fans, this notebook cooler is able to cool down your notebook for better performance and safety.

The contact area has been specially designed with 4 separate aluminum 'zones' allowing the four fans to blow into four different regions under the notebook. This innovative design makes full use of the dissipation area, and also covers the various hot-spots of your notebook. Also included is a fan control knob allowing fan combinations to be turned on or off: all fans on, 2 upper fans on, 2 lower fans on, all fans off, which offers a balance between cooling performance and noise level.

Thermaltake, being an industry leader in computer chassis, thermal solutions, and power supply units announces the newest upgrade on life style notebook cooler ? LifeCool II. Thermaltake LifeCool II Notebook Cooler minimizes heat buildup from the laptop to ensure your computer runs better and cooler. With a padded lower surface cushion to maintain comfort when the laptop is resting on user's lap. This Notebook cooler has a special waved design that makes for its angled top and grip pads ensure the laptop stays perfectly positioned for typing.

For a liquid cooler, enthusiasts are not only looking for an easy and clean setup to efficiently calm the roaring CPU, more likely they also crave for the best low-maintenance solution. Thermaltake, being an industry leader in computer chassis, thermal solutions, and power supply units announces the newest upgrade and is thrilled to launch the new Thermaltake All-In-One Liquid Cooling System (LCS) Water3.0 series.

The Water3.0 lineup features the Water 3.0 Extreme, Water 3.0 Pro and Water 3.0 Performer. The new Water 3.0 Series made setting up just as easy as it cools. It is time to upgrade the simplicity of liquid CPU cooling to enjoy better cooling performance and protect the investment in the CPU as well.

Thermaltake, the leading brand in the computer chassis, thermal solutions, and power supply units. Today officially announces the new launch "GOrb II laptop cooler", a creative, small, easy to carry product for laptops. It can efficiently decrease the overall temperature by creating a cooling gap under the laptop and is specially designed to have an inclined degree to allow for comfortable typing. Forget about carrying another piece of equipment around with you all day, GOrb II is a perfect accessory for laptop essentials, easy carrying and easy typing.

Japanese manufacturer Scythe, known for high performance CPU Coolers and innovative PC accessories, is hereby announcing the brand new Ashura CPU Cooler.

Scythe Ashura is featuring a versatile mounting mechanism for latest CPU sockets and a very slim tower heatsink design to deliver high performance at low noise levels. Hence allows efficient cooling of latest six-core CPUs as well as almost inaudible operation especially with low consumption CPUs in silent systems. Furthermore it is equipped with a Scythe Glide Steam axial-fan, which was recently introduced with Scythe Kabuto II.

In addition to the Mugen 2, Scythe announced second-generation Grand Kama Cross CPU cooler. Grand Kama Cross 2 (model: SCKC-3000) retains the unique top-flow design of its predecessor, which uses two large aluminum fin stacks arranged along inclines in opposite directions, which are ventilated by a fan from an angle, ensuring high turbulence, and with it, heat dissipation.

With Grand Kama Cross 2, Scythe redesigned the fins to line up straight under the fan's air flow, so air is guided into the stack, and not repelled. The fins later cut an angle, increasing turbulence, improving heat dissipation. Heat from the CPU is drawn by a nickel-plated copper base, from which four copper heat pipes convey it to the two fin stacks. A 140 mm Scythe Falcon PWM fan handles air-flow. It spins at speeds ranging from 500 to 1,300 RPM, pushing 37.37 to an impressive 97.18 CFM of air. Like the Mugen 4, this cooler comes with HPMS, a new retention system that takes fewer steps to install, and supports the new LGA1150 CPU socket. Slated for April 24, it is priced at 4,980¥ (US $50).Source: Hermitage Akihabara

Scythe rolled out the fourth generation Mugen CPU cooler, in its home market of Japan. Mugen 4 (model: SCMG-4000), builds on the design of its predecessor with a feature it calls TMAPS (three-dimensional multiple airflow pass-through structure), a fin stack arrangement that works to improve air-flow and heat-dissipation to the flowing air. Another abbreviation Scythe is throwing at you is HPMS (hyper-precision mounting system), a new retention module that takes fewer steps to install, and supports all modern CPU socket types, including the upcoming Intel socket LGA1150, on which desktop Core "Haswell" processors will be based.

Scythe Mugen 4 retains the unique jagged aluminum fins of its predecessor, it is an aluminum fin tower type CPU cooler, which uses six 6 mm-thick copper heat pipes to convey heat to the stack. Heat is drawn from a nickel-plated copper base. A Falcon 120 mm PWM fan guides air through the heatsink, which spins at speeds ranging from 400 to 1,400 RPM, pushing 20.7 to 79 CFM of air. Measuring 130 x 88 x 160 mm, the cooler weighs about 625 g. Slated for April 24, it is priced at 4,980¥ (US $50).Source: Hermitage Akihabara

Thermal Solutions specialist GELID Solutions unveils the SlimHero which is a low profile CPU Cooler of its SILENT product line. The SlimHero features 4 sintered power heatpipes with a silent and slim 120 mm fan. The copper heatpipes ensure maximum heat transfer from CPU to the aluminum fins. The heatsink is built in a unique shape to lower the air flow resistance. The cooler can be mounted on each directions of the AMD socket.

The low profile cooler SlimHero is especially designed for compact PC cases where space can be the key problem. With a total height of 5.9 cm this cooler can fit almost all smaller cases and is able to cool up to 136W (TDP).

Noctua today presented the latest models of its award-winning NH-U series of quiet single tower CPU coolers: Whereas the NH-U12S comes equipped with the renowned NF-F12 120 mm fan and succeeds the highly popular NH-U12P SE2, the NH-U14S is the series' first 140 mm model and uses the new NF-A15 140 mm fan. Both models feature a new, slim design that ensures easy RAM access and maximum compatibility with tall memory modules.

"The original NH-U12 and NH-U9 were the first Noctua products we brought to the market and the NH-U series has been a cornerstone of our success ever since", explains Mag. Roland Mossig (Noctua CEO). "Representing the next generation of this venerable legacy, the new NH-U12S and NH-U14S are the result of almost 10 years of continuous development and optimisation. Both models mark a significant improvement in performance, convenience and compatibility."

Evercool announced the HPR 9225EA entry-level tower-type CPU cooler. It uses a stack of 43 aluminium fins, to which heat is conveyed by two 6 mm-thick copper heat pipes, which make direct contact with the CPU at the base. The stack is ventilated by a 92 mm fan that spins at speeds up to 2,200 RPM, pushing 35.6 CFM of air, with 26.3 dBA noise output. Measuring 97 x 73 x 118 mm (WxDxH), the cooler weighs about 400 g. It supports most modern CPU socket types, with the exception of LGA2011. Among the socket types supported are LGA115x, LGA775, AM3+/AM3/AM2+, and FM2/FM1. The company did not give out pricing information.

Cooler Master showed off a trio of air-cooling solutions at CeBIT, which includes the TPC 612 and V8 GTS CPU coolers, and JetFlo 120 case fans. The TPC 612 is a compacted version of the TPC 812. It retains the design concept of its older sibling, that of a heatpipe-fed aluminum fin stack that also uses a vapor-chamber tube for more efficient heat transfer; while using just four heat pipes, and a more compact vapor-chamber tube. Measuring 145 x 97 x 161.6 mm (WxDxH, including the fan), it weighs about 640 g. It uses a single 120 mm PWM fan that spins in the range of 600 to 2,000 RPM, pushing 24.9 to an impressive 82.9 CFM of air. The TPC 612 is compatible with all modern CPU socket types.

Moving on, the V8 GTS is Cooler Master's latest monstrosity, one that is designed to take on pre-assembled closed-loop liquid CPU coolers. It uses a triple independent aluminum fin stack design, which is ventilated by a pair of 140 mm fans. An unknown (we're guessing six) number of 6 mm-thick nickel plated copper heat pipes convey heat from the base through the three fin stacks. Measuring a whopping 154 x 149 x 160 mm, it weighs 1,140 g. Each of its two 140 mm fans uses a 4-pin PWM connection, spins at 600 to 1,600 RPM, pushing 28 to 82 CFM of air. Lastly, Cooler Master showed off its JetFlo 120, a neat little 120 mm spinner featuring PWM, 800 to 2,000 RPM speed range, and up to 85 CFM air-flow.Source: Guru3D

At its CeBIT booth, German PC peripherals maker Be Quiet! unveiled the Shadow Rock 2, its latest high-performance air CPU cooler. Pictured below, the Shadow Rock 2 uses a fairly cube-shaped (120 x 120 x 120 mm) aluminum fin stack with jagged and curved edges; through which four 8 mm-thick copper heatpipes pass; which draw heat from a copper base. A 120 mm Shadow Wings fan comes included. The Shadow Rock 2 is expected to be priced around €45.Source: Hardware.info

Corsair, designer of high-performance PC hardware components, today announced the Hydro Series H110 and H90 liquid CPU coolers. With huge radiator cooling surfaces areas of 280 mm and 140 mm respectively and specially designed 140 mm low-speed, high static pressure fans, the new coolers deliver superior CPU cooling and quieter operation than smaller 120 mm designs.

The Hydro Series H110 is a low-noise, high-performance liquid CPU cooler with a double-length 280 mm by 140 mm radiator. The H110 radiator's large surface area provides more contact room for heat dissipation and for side-by-side mounting of dual fans. Each fan is a specially-designed low-speed 140 mm static pressure fan, which moves much more air per decibel of noise than 120 mm fans. Combined, the larger radiators and lower fan-speeds produce better performance with much lower noise levels than smaller 120 mm dual-fan coolers. The H110 fits cases with dual 140 mm top fan mounts and 20 mm screw spacing.

Rouchon Industries Inc., dba Swiftech is proud to announce the imminent release of the H220 CPU cooling kit, a new all-in-one liquid cooling system compatible with all current Intel and AMD desktop processors that will ship to consumers already pre-filled for plug-and-play operations. Setting itself apart from similar offerings, the product will also feature full expansion capabilities to include additional cooling devices for graphics and or chipset.

The H220 will be unveiled during the Consumer Electronics Show held from January 8th to 11th in Las Vegas, NV and Swiftech will demonstrate several systems featuring the new cooler capabilities at the Mandalay Bay Hotel Penthouse suites.

Thermal Solutions specialist GELID Solutions unveils its high end "The Black Edition" CPU cooler with the multi award-winning Slim 12 PWM and Silent 12 PWM fan. The cooler is a product of GELID Solutions GAMER product line.

GELID Solutions has set their benchmark for CPU cooler to the next level. With 7 power heatpipes and providing the opportunity to attach up to 3 fans "The Black Edition" fulfills many requirements of today's professional users. 3 pcs of 8mm and 4 pcs of 6mm power heatpipes were built into the cooler to ensure maximum heat transfer from the hottest area of the core to the aluminum fins at extreme condition. Then a unique heatsink design was created to achieve lower air flow resistance and to provide efficient air channels. The compact heatsink with even 7 power heatpipes ensures sufficient space for rams on Intel's X79 motherboard. Thanks to the heatsink design up to three 120mm fans can be attached to the cooler. GELID Solutions provides 2 multi award-winning fans (Slim 12 PWM and Silent 12 PWM) with high airflow. Both fans run silently at low CPU temperature and thanks to their PWM fan control the fan speed accelerates immediately when CPU temperature becomes higher.

Taiwanese company Evercool will soon be rolling out a new CPU cooler, a model called Venti (aka HPQ-12025) which offers support for Intel LGA775/1366/1156/1155/2011and AMD AM2/AM2+/ AM3/FM1 processors. This tower-shaped cooler measures 125 x 68 x 160 mm and features four 6 mm direct touch copper heatpipes, aluminum fins, and a 120 mm EL Bearing fan that runs at 800 to 2200 RPM (a second 120 mm fan can also be installed).

Venti's price tag has not been revealed.

Deepcool, the leading manufacturer of a wide range of computer cooling products and laptop/tablet PC accessories, released a super slim and portable notebook cooler - N1. N1 is only 2.6 cm when you fold the supporting feet; you can easily put it into your laptop bag. And with a light weight, you can carry it with you anywhere anytime.

Super flat metal mesh front can easily impress you through its visual effect. It's not about how metal mesh combines with plastic base, but about what aesthetics is. The metal mesh stretches all over the front panel and folds into the edge. It's like a masterpiece at first sight. Under the metal mesh, the big 180 mm cooling fan moves an optimal airflow to cool your laptop. And you can adjust the speed with the speed control knob on the cable.

We know that cooler choice has long been a headache for ITX and HTPC system builders. Stock CPU heatsinks and coolers are hot and noisy, while high quality coolers usually either don't fit the case or interferes with your GPU. So finding the perfect balance of size, thermal performance and noise on ITX and HTPC systems has never been easy, until now!

The Thermalright AXP-100 is here! This latest creation by Thermalright is only a mere 58 mm (2.28 inches) in height including the bundled TY-100 high performance PWM fan. This height provides almost full compatibility with HTPC and ITX cases on the market. Thermalright.com will also be displaying a full list of case compatibility on our product page.

Akasa is updating its cooling offer with a new solution aimed at HTPCs, a low profile CPU cooler called Nero LX. Codenamed AK-CC4011EP01, Akasa's creation measures 120 (W) x 120 (D) x 59 (H) mm, it weights 298 grams and has aluminum fins, four direct contact copper heatpipes, and a 120 mm PWM fan that operates at 600 to 1900 RPM (11.50 - 31.50 dBA sound output).

The yet unpriced and undated Nero LX supports Intel LGA775/1155/1156/1366 and AMD Socket AM2(+)/AM3/FM1 processors.Source: Cutedevice

Cooler Master today announced that its latest All-In-One (AIO) liquid cooler, the Seidon 120M, will become available in Europe around mid-December. Cooler Master's solution is factory filled with coolant and features a waterblock machined out of a single block of copper, a compact, 120 mm aluminum radiator, and a 120 mm Rifle bearing PWM fan that can operate at 600 to 2400 RPM (19 ~ 40 dBA sound output).

The Seidon 120M supports Intel LGA 2011/1366/1156/1155/775 and AMD Socket FM1/AM3+/AM3/AM2 processors and will cost €54.99.

Sapphire officially launched the Vapor-X CPU cooler it talked about at trade shows earlier this year. It uses a vapor-chamber plate to draw heat from the CPU, and convey it to four 7 mm-thick nickel-plated copper heat pipes, which then pass through a dense aluminum fin stack, that's ventilated by two 120 mm PWM controlled fans (replaceable) in push-pull configuration. Spinning at speeds ranging between 495 and 2,200 RPM, the fans push 77 CFM of air, each. Measuring 135 x 110.4 x 163.5 mm, the heatsink weighs about 925 g. Nearly every modern client CPU socket type is supported, including Intel sockets LGA2011, LGA115x, LGA775, and AMD sockets AM3+/AM3/AM2+/AM2, and FM2/FM1. Expect a sub-$80 price.

Ever since the introduction of the first Archon "Slim Tower Heatsink" back in 2010, Thermalright has never stopped improving on its own design. Incorporating our new proprietary Pressure Vault Bracket System we introduce to the world the all new Archon SB-E X2. Aside from a total overhaul and upgrade of the mounting bracket system, the Archon SB-E X2 will be using two TY-141 high efficient double ball bearing silent fans, giving enthusiasts the perfect mash-up of performance, compatibility and silence!

The new VX BTKII mounting system on the Archon SB-E X2 brings Thermalright's Pressure Vault Bracket system to all new heights, for the first time supporting CPU's from both AMD and Intel. The VX BTK II works on almost all modern motherboards. The bracket system only takes four simple steps to mount your heatsink. A simple turn of the Central Pressure Knob lets you adjust between 40 to 70 pounds of extra pressure. The nickel plated bracket adds not only flair to your system, but also extra longevity against oxidization and rust.

Do most pre-built CPU liquid cooler kits look the same to you? It's probably because they carry Asetek or Akasa design. Enter a refreshment in the pre-built arena: Zalman. The Korean PC cooling veteran unveiled Reserator, a liquid cooler which swaps the conventional-looking radiator for a high-performance heatsink with radially-projecting copper fins, in which the heat pipes are swapped with coolant channels. The contraption is ventilated by a 120 mm Zalman custom-design blue or red LED-lit fan, with PWM control. The CPU block features copper base with mirror finish, while its other parts are given aesthetic touches with chrome plating and LEDs. The cooler will be designed to handle thermal loads as high as 400W. It is slated for early-2013.