Be Quiet!, market leader with power supplies in Germany for seven consecutive years, confirms that all of it's current PSU models support Intel's fourth generation of Core processors (Codename Haswell). Intel's upcoming Haswell CPUs impose stricter requirements on the power supply regarding energy saving features. To lower the power consumption of current computers even more, the new processors feature new sleep states called C6 and C7. In these states, the processor is nearly shut off completely, bringing down the power consumption close to zero.

Intel will soon introduce the new 4th generation Intel Core processors, code-named "Haswell", the new technology for reducing power consumption of the CPU in sleep mode. The new C6 and C7 states are able to reduce the CPU power consumption to just 0.05A (0.6W) while previous Ivy Bridge processors draw up to ten times more minimum power. As this resulting from the deep sleep state, when most other 12V devices are either turned off or in low power state, this significantly decreases the 12V load on the power supply.

Thermaltake, being an industry leader in computer chassis, thermal solutions, and power supply units announces the latest news that most high-end power supplies of Thermaltake are fully compatible with Haswell CPUs. All current high-end and mainstream PSUs from Thermaltake are already prepared for the new Intel processors to deliver stable voltages to achieve maximum energy savings.

With the new 4th generation Intel Core processors, code-named "Haswell", Intel introduces new technologies for reducing the power consumption of the CPU during sleep. The new deepest sleep state, called C7, will be able to reduce the power consumption of the CPU to only 0.05A (0.6W). As this occurs in the deep sleep state, when most other 12V devices are either in low-power states or turned off, this can reduce the 12V load on the power supply significantly. For some power supplies this low load can cause voltage regulation issues, if combined with high loads on the minor rails (3.3V and 5V).

The EVGA SuperNOVA 1000 G2 has arrived! This power supply is 80 Plus Gold Rated, offers 1000W of continuous power, exceptional efficiency and is fully modular. Not to mention, a first class 10 Year EVGA Warranty. Designed with enthusiast needs in mind the EVGA SuperNOVA 1000 G2 power supply is the best choice to power this and next generation enthusiast computers. Take your system to the next level and power up with the EVGA SuperNOVA 1000 G2.

Enermax's line of PSUs feature products for every available niche. The NAXN series has been distinguished as solid, quiet and reliable power supply units for system builders and DIYers.

Like the original NAXN, the NAXN ADV features all of the requirements of modern PSU including being 82PLUS ready since it is able to run at 82-88% efficiency with a 20-100% load and is therefore compliant with the 80PLUS BRONZE efficiency requirements. It is also desgined for constant use and is ready for 24/7 daily operation. This is important for critical non-stop industrial class performance at an ambient temperature of 40°C/104°F. And like the original NAXN the ADV edition is also world ready being able to handle 100-240VAC input with automatic adjustments as needed and with Active PFC for global usage.

Cooler Master, a leading creator, innovator and manufacturer of desktop components and more, today announced the entrance of the top performing V Series Power Supply (PSU) line to North American markets.

Developed to be the highest quality, Cooler Master carefully sourced every aspect of the V Series PSU line to produce a high-efficiency and stable power supply. This operational stability includes being highly efficient even at low loads ? far exceeding the parameters of the breadth of operational efficiency exhibited by a typical 80 Plus Gold PSU. A single, powerful rail platform channels the full power of V Series PSUs with outstanding voltage stability, ripple suppression and efficiency. These higher quality components include the highest grade Japanese electrolyte and solid capacitors, a custom PCB interface, and high quality 42mm transformers. All of which are among a few of the integral parts that make the V Series a great power supply.

Thermal Solutions specialist GELID Solutions adds Cable as a new product category to its GAMER product line. To start power supply cable adaptor such as 6pin (PCI-E), 8pin (EPS) and 24pin (EPS) with precisely prepared high-end UV reactive single sleeve in black, white, red and blue will be offered for the enthusiast. All cables have a AWG 18 size and a length of 30 cm.

"When quality and color can add value to your system, you will start to appreciate them," said VC Tran, Marketing Director of GELID Solutions Ltd.

Intel has just released more details about the new Haswell processors. It sets new benchmarks in terms of energy efficiency. The new C6 and C7 states are able to reduce the CPU power consumption to just 0.05A while previous Ivy Bridge processors draw up to ten times more minimum power.

But the positive progress of the CPU technology is subject to certain restrictions, because only few power supplies will be able to deliver stable voltages at such low loads. End users are therefore groping in the dark with no clues if their own power supply will be compatible with the new energy functions of Intel Haswell CPUs. PSU manufacturers usually do not state the possible minimum load of their products.

Chinese peripherals company Orico introduced a trio of external multi-bay 3.5-inch HDD enclosures. These include a gigantic 10-bay stacker (model: 1088USJ3), and its 8-bay (8988USJ3), and 5-bay (5988SUSJ3) siblings. The three use standard ATX PSUs to power the drives. The three feature matte black SECC steel bodies, with brushed metal front. The three internally use SATA 6 Gb/s interface, and lockable caddies. The 10- and 8-bay models only feature USB 3.0, while the 5-bay gives you both USB 3.0 and eSATA host connectivity options. The enclosures lack RAID support, so each disk is visible to the host as an independent mass storage device, with partitions showing up as volumes. The 10-, 8-, and 5-bay enclosures are priced at RMB 2399¥ ($390), 1999¥ ($325), and 1399¥ ($227), respectively.Source: Expreview

COUGAR, leading PC case and power supply brand has revealed the COUGAR SL PSU. This is part of their value line of power supply solutions and it is fully compliant with the 80-PLUS Gold efficiency requirement, featuring a peak efficiency of up to 80%. The SL series is equipped with a quiet COUGAR fan that provides optimum cooling.

The SL series is fully compatible with the latest PC technologies, supporting the newest specifications of ATX12V, and created for use with current and next-generation multi-core CPU platforms. COUGAR Ultra Quiet and Temp Controlled Fan Providing an extremely quiet mode of operation, the fan in the PSU also has its speed automatically governed based on the ambient temperature. This allows for optimal efficiency and cooling.

Cooler Master showed off a new line of performance-segment PSUs under its V-series. Consisting of three models, the V700 (700W), V850 (850W) and V1000 (1000W), the three boast of 80 Plus Gold efficiency rating (90 percent efficiency at 50 percent load, 87 percent efficiency at 100 percent load).

The three feature fully modular cabling (including 24-pin ATX and 8-pin EPS); four 6+2 pin PCIe connectors on the V700, and six on the V850 and V1000; and all modern protection features. It's reported that the three are originally manufactured by Seasonic. Pricing and availability are under the wraps.Source: Guru3D

At CeBIT, Enermax showed off its premium Fanless 650W Platinum PSU. Relying entirely on passive cooling, this box offers 100% modular cabling (including the 24-pin ATX and 8-pin EPS connectors), a dynamic hybrid topology, and DC-to-DC switching. To sweeten the deal for those concerned with its 650W capacity, the PSU is 80 Plus Platinum-compliant, with over 94 percent efficiency. It appears to include sufficient cabling for a gaming PC build with up to two graphics cards (a total of four 6+2 pin PCIe connectors).Source: Lab501.ro

Chieftec unveiled the TASK line of 80 Plus Bronze-certified mid-range PSUs, with seven models built around the 400W to 700W segment (400W, 450W, 500W, 550W, 600W, 650W, 700W). The TASK series bears a mainstream feature-set, including active-PFC, common electrical/thermal safety mechanisms, 120 mm temperature-controlled fans, and compliance with ErP-2013 guidelines. All models feature a single +12V rail design. The 400W and 450W models lack PCIe connectors, the 500W model features one 6+2 pin connector, all other models feature two. All models feature fixed, sleeved cabling. The company did not release pricing or availability information.Source: Overclockers Ukraine

Sharkoon introduces a new power supply series for PC users and gamers, designed for budget-conscious customers looking to score points within the price-performance range. Starting off is the SHA350M Bronze 350 Watt PC power supply. Models in 450 Watt and 550 Watt will follow shortly. The Sharkoon SHA350M Bronze is equipped with a modular connector system, complies with ATX specification ATX 12V V2.3 and also supports the latest Intel and AMD processor systems. It provides an effectiveness of over 80 percent and is 80 PLUS Bronze? certified.

In addition to the two firmly soldered 40+4-pin motherboard connector and motherboard power supply (4+4-pin), the SHA350M Bronze provides altogether six connection possibilities for modular connectors. The power supply has two PCIe (6 and 6+2-pin), six SATA ports and seven peripheral device connectors and a floppy connector.

Enermax plans to enter CeBIT with a three main attractions to its booth. First, a new lineup of fanless/silent PSUs; second, additions to its Fulmo line of ATX mid~full-tower cases; and third, the DreamBass line of notebook coolers that replace your notebook's built-in tweeters speakers with ones that can begin to do justice to bass. To begin with, Enermax is looking to launch a line of fanless PSUs in the mid-capacity range (500W-700W), which toss out fans for chunkier heatsinks, feature modular cabling, and are 80 Plus Platinum-compliant.

Moving on, Enermax will show off a handful of its newest gaming PC cases, including the Fulmo ST ATX mid-tower, pictured below. The Fulmo ST, according to the company, is spacious enough for triple graphics-card gaming PC builds, with room for 240 mm radiators, and a liquid-cooling loop that doesn't stick out. It will pack ten 3.5-inch/2.5-inch drive bays, and various nifty locking/mounting mechanisms that help PC enthusiasts. Following its CeBIT unveil, the Fulmo ST will make it to stores in April.

Lian-Li Industrial Co. Ltd, today announces a new brushed aluminum mid tower chassis, the PC-9N. Supporting ATX and micro-ATX motherboards, the PC-9N forgoes the traditional motherboard tray, and instead implements a railing mount design for increased thermal performance and better cable management.

Lian Li's new railing mount technology greatly improves airflow under the motherboard, helping systems run cooler. This innovative Lian Li design replaces the traditional solid motherboard tray used in competing products, which blocks airflow and adds to system weight and cost. The new railing system also provides better routing options for internal wiring and cables, reducing clutter, improving system appearance and further improving airflow.

FSP's August 2012-launched Raider series of mainstream PSUs got an efficiency upgrade to 80 Plus Silver with two new models, the 650W RA-650, and the 750W RA-750. The two feature single +12V design, handling 50A on the 650W, and 60A on the 750W models. The two are ATX v2.31 and EPS 2.92 compliant, feature most common protection features, 99% active PFC, and fixed cabling. The 650W model features two 6+2 pin PCIe connectors, while the 750W one has four. The rest of the cabling is identical: 24-pin, 4+4-pin EPS, nine SATA, three Molex, one Berg. The two are cooled by a 120 mm temperature controlled fan. Along with the Aurum 92+, the two will be available from some time in February.

OCZ Technology Group, Inc., a leading provider of high-performance solid-state drives (SSDs) and power management solutions for computing devices and systems, today announced that it has added 750 W and 850 W power supply unit (PSU) models to the award-winning Silencer Mk III Power Supply Series from PC Power & Cooling. With these new high-wattage options, the Silencer Mk III provides a professional-grade power solution rated for industrial usage and provides the performance and stability required for demanding computing environments.

"Building on our highly reputable Silencer Mk III core architecture, we are very pleased to deliver new high-wattage options that provide the ultimate in efficiency and stability while delivering ultra-quiet operation and a modular cable design for which this portfolio is highly regarded," said Bob Roark, Vice-President of Power Management for OCZ Technology. "With the addition of 750W and 850W models, the Silencer Mk III Power Supply Series once again defines the ultimate power management solution for today's professional and enthusiast users."

Taiwan based manufacturer Aerocool is announcing the new addition to its product portfolio. Brand new GT series aims for ambitious gamers and enthusiasts, coming with total of eight different models starting with 500 Watts and ending with 1.050 Watts. The acronym "GT" is coming from the Italian words „Gran Turismo", which stand for high-performance luxurious racing cars, built for long distance racing. Aerocool engineers too the challenge seriously both for designing the exterior as well as the interior.

New GT Series is split in two different model-ranges where one is certified with 80PLUS Bronze and the other with 80 PLUS Gold! Hence assures an efficiency of at least 85% respectively 90%. Aerocool achieved this by using two VRM modules, which are using one choke contrary to commonly used designs. This allows the two 12 Volts rails to have a maximum voltage deviation of only 3%, which is lower compared to the required 5% by Intel's specifications. Aerocool aims to deliver high efficiency and stability especially during long load sessions with its new GT PSU Series.

Norse mythology buff Xigmatek has today announced not one but three new lines of power supplies, the Vector S (80Plus Silver certified), Vector G (80Plus Gold) and Vector P (80Plus Platinum). Claimed to be 'optimized for low thermal signatures, ultra-low noise operation, and stable power delivery', these PSUs comply with the Intel ATX 12V 2.3 & SSI EPS 12V 2.92 standards, and feature a semi-modular design, high-grade Japanese capacitors, a 135 mm fan, a MTBF of 120,000 hours, active PFC (up to 0.99 PF rate), and multiple 12V rails (up to four on the Vector S units and on the 850 W Vector G model).

The Vector G PSUs come in 650 W, 750 W and 850 W flavors, the Vector P in 600 W and 700 W, while the Vector S line goes from 650 W, through 750 W and 850 W, up to 1050 W.

NAXN series have been entry-level products of Enermax for several years. In the competitive global market, it wins all the battles and becomes unbeatable. Not only 80plus series for beginners, but also Bronze and Gold series for DIY enthusiasts, NAXN series can perfectly satisfy various demands from all groups. In 2013, in order to go further and reflect users' opinions, Enermax launches NAXN ADV certified by 80plus Bronze. Except for original premium NAXN DNA, Enermax adds in more mainstream features.

Responding to the market's newfound love for gaming-grade micro-ATX cases, SilverStone rolled out the Sugo SG10. Don't be fooled by its looks - a HTPC-esque front panel, with a slot-in slimline optical drive bay, this case packs a punch. Its SECC steel frame can hold on to a micro-ATX motherboard, a double-slot graphics card that's 33.7 cm long (a GTX 680 should fit just fine), a forward-located PSU bay (a large 1200W PSU should fit), CPU coolers over 160 mm tall, and a combination of 180 mm top and 120 mm rear exhausts, and a 120 mm front intake.

NZXT announced the HALE90 V2 line of premium full-modular PSUs. The 80 Plus Gold-qualifying PSUs come in three variants, 1200W, 1000W, and 850W. As mentioned before, the three feature completely modular cabling, IC-assisted DC-DC switching, a powerful 5VSB rail to help the growing demand for USB-charging, a single 12V rail topology, and a 135 mm fan. The 1200W model has enough PCIe cabling for quad-SLI/CrossFireX setups, 1000W for triple-SLI/CrossFireX, and 850W for dual-SLI/CrossFireX. The 1200W, 1000W, and 850W models are priced at $270, $230, and $190, respectively.

Corsair launched the VS line of entry-level PSUs for markets with 220~240VAC electricity, which strikes out 100~120VAC markets, such as the US and Japan. Available in 350W, 450W, 550W, and 650W models priced at the equivalent of $40, $50, $60, and $70, respectively, the PSUs feature completely fixed cabling, compliance with most modern PSU technologies (except 80 Plus efficiency certification), and features most standard protection mechanisms against over/under voltage, over-load, and short-circuit. The four use a single +12V rail design. The 350W and 450W models feature single 6+2 pin PCIe power connectors, the 550W and 650W feature two.

Corsair, a worldwide designer and supplier of high-performance components to the PC hardware market, today announced the addition of the CX Series Modular power supply units (PSUs) to the company's award-winning PSU line-up. Available in 430, 500, 600, and 750 watt power configurations, the new CX Modular PSUs provide PC builders with the stable reliability of Corsair PSUs at a price that is easy on the pocket.

Unlike budget PSUs, the CX Series Modular PSUs feature a hybrid modular cable system that allows PC builders to install just the cables (PCI-E, SATA, and 4-pin) required for their computer's configuration, for a cleaner look and improved airflow and cooling. The standard ATX form factor and ample cable lengths of the PSUs provide worry-free compatibility with the majority of PCs. In addition, the 80 PLUS Bronze certified PSUs deliver up to 85% energy efficiency at typical 50% usage loads, producing less heat, improving reliability, and reducing noise.