News Posts matching "adata"

Return to Keyword Browsing

ADATA Launches the ISMS312 7pin Disk On Module SATA SSD

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the ISMS312, a high-performance industrial SATA III 6 Gbps 7-pin Disk-On-Module (DOM), which is suitable for embedded storage systems, industrial computers, medical and network infrastructure devices by providing the best balance between performance and cost. It also features the industrial grade S.M.A.R.T. and capability of customization for industrial application.

A+ SLC Solution for Various Upgrade Demands
The ADATA ISMS312 SATA III 6 Gbps 7pin DOM is a high-speed MLC NAND flash, providing excellent performance and reliability with a sequential read/write speed up to 250/40 MB per second and MTBF of up to 1 million hours. In addition, the ISMS312's low 1.15W power consumption can save power and significantly extend the lifespan of the devices it supports. And thanks to the industrial grade operable temperature range of -40°C to +85°C, the ISMS312 can work in harsh environments for long-term operation. The ISMS312 is available in both horizontal and vertical pin orientations to accommodate a wide variety of system form factors.

ADATA Premier DDR4 Memory Modules Spotted in Stores

Wanna build a Haswell-E HEDT build on the "cheap?" Then this could make it to your list. ADATA is ready with its no-frills Premier line of DDR4 memory modules, which are sold in single-module packs of 4 GB and 8 GB. The modules stick to JEDEC specifications of DDR4-2133 MHz (PC4-17000), with CAS latencies of 15T, and voltage of 1.2 Volt. The modules use DRAM chips made by SK Hynix. Inclusive of all taxes, the 4 GB module is priced at the equivalent of $75 USD in Japan; and the 8 GB module goes for the equivalent of $150.


Source: Akiba PC Watch

ADATA Launches XPG Z1 DDR4 Overclocking Memory

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the first DDR4 overclocking memory of XPG series - XPG Z1, which supports the latest Intel Haswell-E platform for ultimate performance. With the benefits of DDR4, the XPG Z1 is not only a powerful weapon for gaming, also an important component for overclocking.

Performance Boosts with Great Power Efficiency
DDR4 outperforms DDR3 with improved performance and lower power consumption. The operating voltage has decreased from 1.5V to 1.2V, which is a 20% reduction of power, and keeps the system at a low temperature for stable operation. With speeds of up to 2800 MHz, timings of CL 17-17-17 and transfer bandwidth reaching 22 GB/s, the XPG Z1 provides improved efficiency of data transfer than ever. It only requires 1.2V to achieve high clock frequency of 2800 MHz for overclockers. In addition, the SPD (Serial Presence Detect) of XPG Z1 allows direct application without changing settings in the BIOS, facilitating usage and system stability.

ADATA Launches 2.5-Inch SSD for Industrial and Enterprise Upgrades

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the industrial grade ISSS312 2.5" SATA III (6 Gb/s) Solid State Drive. It features low power consumption, industrial grade S.M.A.R.T. and power loss protection (PLP) for excellent performance and reliability. It also provides MLC, A+ SLC, SLC grades and wide temperature to meet the upgrade requirements of industrial equipment and enterprise devices.

MLC/A+ SLC/SLC solutions for various applications
Since storage applications are rapidly changing, the concepts of consumer digital lifestyles and the Internet of Things (I.O.T.) are developing, and web applications and technology are growing sharply, the industrial equipment and enterprise platforms need more powerful data computing capability, real-time transfer rate and high I/O throughput to cope with future trends.

ADATA Launches Premier DDR4 2133 U-DIMM Memory

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the Premier DDR4 2133 Unbuffered DIMM memory, which supports the latest Intel Haswell-E platform for extreme performance. Thanks to the benefits of DDR4 and rigorous production of ADATA, the DDR4 2133 U-DIMM memory module is the best upgrade solution for PC DIY users.

Faster Data Transfer, Higher Power Efficiency
With speeds of up to 2133 MHz and a transfer bandwidth reaching 17 GB/s, the Premier DDR4 2133 Unbuffered DIMM provides greater efficiency of data transfer than previous generations of DRAM. Compared to DDR3, DDR4 memory features faster clock frequencies and lower power consumption. Running at just 1.2 volts, the new DDR4 2133 Unbuffered DIMM can save 20% of the power making it an environmentally friendly component. In desktop PCs, the advantages of DDR4 will lead to lower costs and improved overall performance.

ADATA Launches the UV130 USB Flash Drive

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the UV130 USB Flash Drive. Featuring the high-quality titanium appearance with solid zinc-alloy materials, and a race car spoiler-inspired strap hole, the UV130 not only provides durability, but also a fashion accessory for your daily life!

Style Meets Durability
The UV130 is shaped with precise integrated technology with zinc-alloy to feature a simplistic and streamlined look, as well as higher durability. For those who require high quality, personal items must be useful and stylish. Therefore, the capless UV130 features a race car spoiler-inspired design with a big strap hole for a modern look and high portability, allowing users to carry and plug it in easily. The strap hole also makes the drive easy to carry on a keychain.

ADATA Launches XPG V3 DDR3 Overclocking Memory

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the latest XPG V3 series overclocking memory, running at a stellar 3100 megahertz. Its dual channel is designed to bring gamers and PC enthusiasts ultimate performance by Intel Core fourth and fifth-generation processors and the latest Z97 platform.

The Thermal Conductive Technology for Great Heat Dissipation
With speed up to 3100 MHz and transfer bandwidth reaching 24.8 GB/s, the XPG V3 series once again pushes gaming to the next level. It supports Extreme Memory Profile (XMP) version 1.3 and utilizes the Thermal Conductive Technology (TCT), which reduces the system temperature effectively. It enables every chip have contact with the heat sinks directly, ensuring IC and PCB operate in an environment of equal temperature for the best stability, even in full-speed operation.

ADATA to Display New SSDs, DDR4 Memory and High Capacity Memory

ADATA Technology Co., Ltd., is honorably invited by Intel as a strategic partner to the Grantley New Platform Workshop. During the 4 day event taking place on June 24th & 25th in Hillsboro, Oregon and July 9th & 10th in Hudson, Massachusetts, ADATA will proudly demonstrate the latest DDR4 server DIMMs, DDR3 LR-DIMMs, and complete product line of 2.5" SSDs and PCIe SSDs. One of the primary showcases will be server grade DDR4 R-DIMMs supporting the latest Intel Xeon processor E5-2600 v3 series with the features of up to 16 GB density, 1.2V low power consumption, and maximized 2133 MHz high speed transmission. ADATA's DDR4 product line includes DDR4 RDIMMs, VLP R-DIMMs, LR-DIMMs, and ECC SO-DIMMs.

In-memory computing stores data on memory chips rather than hard drives removes any performance bottleneck caused by traditional storage. ADATA DDR3 LR-DIMMs 64GB and R-DIMMs 32GB (with Invensas DFD technology) support In-memory computing with high capacity and outstanding performance. In Intel New Platform Workshop, ADATA will demonstrate DDR3 LR-DIMMs, which deliver up to 64GB capacity for Intel Xeon processor E5 V2 family-based servers, and increase total memory capacity by up to 1.5 TB to fulfill In-Memory Computing application.

ADATA Launches Industrial CFast 2.0 Memory Card

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the industrial CFast card -ISC3E, which combines the form-factor of a CF card with the high-speed SATA interface for both high reliability and secure operation, widening the application of industrial equipment.

ADATA's ISC3E CFast is compatible with CFast 2.0 and SATA 3.1. The sequential read/write speed is up to 435/120 MB/s (MLC) and 165/170 MB/s (SLC). It is highly shock and vibration resistant, withstand extreme temperatures from -40 ºC to +85 ºC, and the MTBF is up to 2 million hours. With the features above, the ISC3E CFast is quite ideal for those industrial systems which require long-term operation. Additionally, the ISC3E operates at a low 3.3 volts, and supports DVESLP (Device Sleep) to save more power and prolongs the operation time.

ADATA Launches HV611 USB 3.0 External Hard Drive

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches the HV611 USB 3.0 2.5" external hard drive. With a simplistic design, vivid colors, and unique puzzle patterns, the HV611 can present your style effortlessly. Its compact size allows you to carry it easily wherever you go.

The HV611 applies the SuperSpeed USB 3.0 interface, which greatly improves the efficiency of data transfer compared with USB 2.0. Featuring a unique puzzle design, the interlocking shiny and matte puzzle piece lines present an eye-catching style. With a bright blue LED indicator, users will know the status of data transfers. The HV611 has capacities of 500GB and 1TB and is available in 4 color choices - cool black, starry white, shining blue, and hot pink.

ADATA DDR4 OC Module Spotted on a Working Haswell-E HEDT System

ADATA's claim of being the first memory maker with DDR4 overclocking modules wouldn't fly with anyone, if they weren't using a live Haswell-E HEDT platform to show it off. The system appears to be using a prototype Intel X99 chipset micro-ATX motherboard by ASRock, and a Haswell-E engineering sample. The module comes with JEDEC SPD profile of 2133 MHz, but claims to offer tons of overclocking headroom. The system was wired to a display, and evidently, CPU-Z can't read the memory config. It can, however, read out DRAM clock and timings. The system was doing 1373 MHz (2746 MHz DDR), with timings of 14-14-14-36-CR2T.

ADATA and ASRock to Showcase the Glory of Cooperation

ADATA Technology Co., Ltd., a leading manufacturer of high-performance DRAM modules and NAND Flash application products, collaborated with AsRock to run a demo system equipped with ADATA's overclocking memory modules and AsRock's motherboard, whose performance reached a breakthrough record. ADATA's XPG series DDR3 3100 memory modules going with AsRock's the latest Z97 OC Formula motherboard and Devil Canyon I7 4790K CPU processor reached the 3400MHz outstanding performance, which will be displaying at ADATA's booth and bring you with an amazing experience.

ADATA XPG Series exclusively designed for overslockers can meet the needs of professional gamers with the ultra-high speed performance and ultra-fast cool down function. At this year's Computex, ADATA will be showcasing its latest XPG Series V3, DDR3 3000 8GB x 4, whose 32GB capacity can match ASRock Z97 OC Formula motherboard bringing out a steady speed of 3000MHz, and fulfill overclockers' picky needs of high capacity and high performance as well. In addition, its replaceable heat sink design allows users to customize the memory modules' color to complement their high performance system. ADATA is the first one who is able to steadily provide customers with 8GB x 4 pack memory module house in the industry.

ADATA Launches SP910 2.5-Inch and SP900 M.2 SATA SSDs

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launches three new SATA 6 Gb/s SSDs - the Premier Pro SP900 M.2 2242 and 2282 for Ultrabooks and desktop PCs, and Premier Pro SP910, which is suitable for gamers and video editors. No matter the computer, users can find the best solution to upgrade and experience the optimized performance of an SSD.

The Premier Pro SP900 M.2 2422 and 2280 are the latest and smallest SSDs in the market with extremely slim designs and small dimensions (22x42 mm, 22x80 mm), which meet the M.2 standard from Intel. They are smaller than the typical 2.5" SSD and mSATA, but come with bigger capacities, including 128 GB, 256 GB, and 512 GB. The two SSDs are not only suitable for Ultrabooks, but also for new motherboards in the next generation of PC upgrades.

ADATA SR1020 PCI-Express in the 2.5-inch Form-factor and MicroSSD Pictured

At Computex, ADATA is planning to unveil some of its first enterprise SSD in recent times, beginning with the SR1020 series. Its 2 TB variant is pictured below. What makes the drive unique, is that it ships in the 2.5-inch form-factor, and supports 20 Gb/s PCI-Express (likely Gen 2.0 x4) interface. The product label doesn't mention how the drive plugs in. No variations of SATA-Express offer 20 Gb/s bandwidth at this time; while this clearly isn't an M.2 drive. The company is also expected to show off its MicroSSD, an SSD-on-a-chip solution, which is a multi-chip module (MCM) of an SSD controller and some NAND flash memory.

ADATA's Next-generation XPG Memory Modules Detailed

Here is the first picture of ADATA's XPG V3 DDR3 DRAM module. It will be launched alongside the company's first enthusiast-grade DDR4 modules. ADATA's XPG Z1 DDR4 modules will come in densities as high as 16 GB, clocked at JEDEC-standard DDR4-2133 MHz, and run at module voltages of 1.2V. The same heatspreader design as the one pictured below, will also be used on the company's new XPG V3 line of DDR3 modules, and will come in a number of color options, to match your motherboard's color scheme. The first client platforms with support for DDR4 memory include Intel "Broadwell," and "Haswell-E" HEDT.

ADATA's Flagship M.2 SSD Pictured

ADATA revealed its flagship consumer SSD in the M.2 form-factor, the SR1020NP series, which is an evolution of the AXNP280e it unveiled at this year's International CES. The drive comes in capacities of up to 1 TB, is based on LSI-SandForce 3700 series processor wired to MLC NAND flash, and a host interface with wiring for PCI-Express 2.0 x4 physical layer. Most M.2 SSDs, in contrast, are being designed for PCI-Express 2.0 x2.

That's not all, most motherboards launched on Intel's 9-series chipset feature M.2 slots with just PCI-Express 2.0 x2 wiring, with the exception of ASRock's top-end Z97-Extreme6, which features a special M.2 slot with PCI-Express 2.0 x4 wiring. Using that slot, however, will eat into the bandwidth meant for graphics cards, and the primary PCI-Express 3.0 x16 slot will run at 3.0 x8, because ASRock wired the slot to the CPU's root complex. Under ideal conditions, SandForce 3700 series processors are advertised to offer sequential transfer rates as high as 1.8 GB/s. Given that, this drive should be bottlenecked on most motherboards with PCI-Express 2.0 x2 based M.2 slots. ADATA will display the drive at the 2014 Computex, early next month, alongside gaming-grade and overclocker-grade DDR4 modules.

ADATA Launches SDXC UHS-I Speed Class 3 (U3) Cards

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has announced the launch of XPG and Premier Pro series SDXC UHS-I Speed Class 3 (U3) memory cards. Compared to the UHS-I U1, write speeds are increased by 750% and 500%, respectively. Both series are designed to support latest UHS-I U3 specification, enabling the cards to capture professional grade high-quality images as well as smoothly transferring large files without any time gaps.

As demand for ultra-fine quality video continues to increase, the 1920 x 1080 pixel resolution of Full HD in the past has quickly evolved into the 4K Ultra HD high resolution standard (3840 x 2160). High-quality video recording creates larger files which require more disk space, presenting challenges to the operation and load bearing capacity of recording equipment and storage media. ADATA XPG and Premier Pro SDXC UHS-I U3 are specifically tailored to 4K2K ultra-high definition devices, and deliver outstanding speeds of up to 95/85 MB/s and 95/60 MB/s, respectively. The SDXC UHS-I U3 cards are ideal for burst mode photography and high resolution videos to capture each fantastic moment with the utmost precision.

ADATA Announces Premier Pro SP920 Series SSD

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today announced the launch of the Premier Pro series SP920 solid state drive (SSD). Designed to meet the high-performance requirements of multimedia file transfers, the SP920 comes in a 2.5" form factor, and is equipped with the latest generation Marvell controller implementing the SATA 6 Gb/sec specification.

SSD continue to become mainstream storage selections for a cross-section of user types, largely due to the higher demands placed on primary system disks by operating systems, games, and high definition media. The SP920 is designed for high performance across a wide range of demanding applications, but it is especially fast in the transmission of multimedia files (uncompressed data). 4 KB random read / write speeds are as high as 98,000/88,000 IOPS, with sequential read and write speeds of up to 560 MB/s and 500 MB/s, respectively. In addition to these impressive numbers, the SP920 maintains consistently high read and write speeds even when the disk is 90% full. This is in contrast to some solid state drives that suffer performance degradation as the drive nears capacity.

ADATA Technology Releases SSD Firmware Update

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has released a firmware update for the company's solid state drives equipped with LSI SandForce 2200 series controllers. This update is applicable to SSD models SX910/SX900/SP900/SP800/S511/S510/S396. The new firmware optimizes TRIM completion behavior and SATA stability, and improves disk recovery in instances of unsafe or improper shutdown. Purchasers who wish to update their SSD firmware should go to this page, select the corresponding SSD product, and then download the compressed Firmware 5.2.5 file and extract it. Then locate the executable file ADATA_SF_FieldUpdater and run it as administrator.

ADATA Launches NBA Pro Series Flash Drives 2013

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has launched the 2013 edition of officially licensed NBA Pro Series USB Flash drives. Sporting a SuperSpeed USB 3.0 interface, the drives will be emblazoned with the jerseys of today's six most popular NBA professional athletes.

The NBA Pro Series USB Flash drives feature a highly durable rubber material that is resistant to liquids and impacts. Extra data protection is ensured by the COB (Chip on board) manufacturing process, which brings added ruggedness in a compact shape. A robust 16GB capacity means that fans will have plenty of space for their favorite media and personal data. A strap hole guarantees convenience and data portability.

ADATA Launches New Generation DDR4 DRAM Modules

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash storage application products, announced today that the company's new generation DDR4 SDRAM modules will be on display at the Intel Developer Forum 2013 (IDF13), held this year in San Francisco. Targeting server and render farm applications, the new DDR4 modules show that ADATA is once again at the front of the pack in providing new high-performance solutions to the enterprise market.

DDR4 SDRAM stands for double data rate fourth generation synchronous dynamic random-access memory, and its most notable features are faster clock frequencies and data transfer rates as compared to DDR3, as well as low power consumption. Running at just 1.2 volts, these new modules are expected to achieve transfer rates of 3.2Gbps, at frequencies as high as 2133MHz, far outstripping the capabilities of previous generations of DRAM. In large scale server applications, the advantages of DDR4 will lead to lower costs and greatly improved overall system performance. The new DDR4 SDRAM modules will be showcased along with the company's other premium memory solutions at booth number 554 at IDF13.

ADATA Announces Premier Pro SP310 mSATA SSD

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash storage application products, today announced the launch of the Premier Pro SP310 mSATA solid state drive. Targeting consumers who are looking for a cost-effective upgrade to the SATA III specification, the SP310 supports Intel Smart Re4sponse Technology (SRT), which permits for the use of an mSATA SSD as a cache drive in conjunction with a traditional hard disk. This hybrid configuration delivers speeds comparable to systems with SSDs as primary drive.

The Premier Pro SP310 offers read and write speeds up to 410 MB/s and 180 MB/s respectively, with maximum 4K random write of 45,000 IOPS. Capacities of, 32, 64, and 128 gigabytes provide greater flexibility for system builders, in that the SP310 can be either a cache drive in a hybrid configuration, or primary storage (boot drive). In either setup, the improvements in booting and file loading speed are remarkable for such a low investment.

ADATA DashDrive Elite HE720 Gets an Update

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, has made another advance in ultra-slim external hard drives with the launch of the DashDrive Elite HE720 in 1 terabyte capacity. The HE720 offers high speed data transmission through a USB 3.0 interface, and has a thickness of only 8.9 mm.

The chassis of the HE720 is made of highly reflective stainless steel and provides 9H grade scratch resistance, which prevents damage and marring even after long-term use. A gleaming LED indicator indicates power and data transfer status, accentuating the modern metallic lines of the drive body. The USB 3.0 interface offers transfer efficiency up to three times that of older USB 2.0 devices, but retains full backward compatibility with earlier versions.

ADATA Launches Sleek New DashDrive HV620

ADATA Technology, a leading manufacturer of high-performance DRAM modules and NAND Flash application products, today launched the DashDrive HV620, an external hard drive that sports sleek lines and a SuperSpeed USB 3.0 interface.

Weighing in at just 152 grams (5.4 ounces), the HV620 sports an eye-pleasing glossy housing, coupled with a bright blue LED that lights up when data is being read from or written to the disk. A raised lip on the edge of the drive protects the lustrous surface from scratching when the drive is laid flat. Its compact profile and smooth lines make it a likely choice for professionals and home users alike.

ADATA AXNP280E NGFF SSD Gives Ultrabooks 1800 MB/s Storage

Impressed with the SX2000 enterprise SSD? Wish you could have those speeds on a consumer device? The AXNP280E from ADATA could soon become an option. This NGFF (next-generation form-factor) SSD is based on a client variant of the LSI-Sandforce SF-8639 controller, which interfaces with the system over PCI-Express 2.0 x4, and offers sequential transfer rates as high as 1,800 MB/s reads and writes, with up to 200,000 IOPS 4K random access, and features essential to client SSDs, such as TRIM and NCQ. Unlike the 2.5-inch SX2000, the AXNP280E is a little constrained with space, and comes in just 128 GB, 256 GB, and 512 GB variants. The latter was on display.

Source: TheSSDReview
Return to Keyword Browsing