Monday, August 3rd 2009

MSI Intros NF750-G50 SLI AM3 Motherboard

MSI is ready with perhaps the industry's first SLI-supportive socket AM3 motherboard, certainly its first. The MSI NF750-G55 is based on NVIDIA nForce 750a SLI chipset, and has its AM3 socket powered by a 4+1 phase circuit, that supports Active Phase Switching that powers down redundant power phases when the load is low. The socket is wired to four DDR3 memory slots supporting up to DDR3-1800 by overclocking.

The nForce chipset connects to two PCI-Express 2.0 x16 slots that arrange as electrical dual x8 when both are populated for 2-way SLI. Apart from this, the chipset also embeds a GeForce 8300 class IGP as a fallback, or for GeForce Boost features. The IGP connects using D-Sub, HDMI, and DVI-D. Other expansion slots include two PCI-E x1, and one PCI. The chipset provides six SATA II ports in all, one of which is designated as eSATA on the rear-panel, next to one gigabit Ethernet, a number of USB 2.0 and FireWire ports, and 8-channel audio. The NF750-G50 has started selling in Europe for under 100 Euros.
Source: TechConnect Magazine
Add your own comment

19 Comments on MSI Intros NF750-G50 SLI AM3 Motherboard

#1
LittleLizard
looks a little crappy and i like msi but this... i dont know. i dont like it.
Posted on Reply
#2
werez
The layout seems ok , the cooling seems ok , 8x SLI is ok , 5% slower than the 780a as far as i know ... good board imo .
Posted on Reply
#3
ShadowFold
First nforce AM3 board, nice. I wonder why no one else has made one before this?
Posted on Reply
#4
suraswami
finally some alternative to AMD chipset boards, really nice for SLI fans who wanted to use AM3 chips. In my opinion RAID is better with NV chipsets than any other chipset.
Posted on Reply
#5
MKmods
Case Mod Guru
I wish they had 16 X2 for the GPUs and the lower PCI should have been switched with the lower PCI X (that way you had the option of either PCI or PCI X.

It looks like its a bit narrower than a reg board too, cool for smaller cases.
Posted on Reply
#6
hat
Enthusiast
Yeah it only has 2 spots to mount it to the case, and the board patially hangs over because it's not quite long enough to reach the 3rd mount. I don't like that deisgn.
Posted on Reply
#7
btarunr
Editor & Senior Moderator
I count six screw mounts. Enough for a board its size.
Posted on Reply
#8
MKmods
Case Mod Guru
I think what Hat meant is if you force the power plug or memory there is nothing behind the mobo to support it.
I use little plastic things in the holes but most people dont have them laying around
Posted on Reply
#9
btarunr
Editor & Senior Moderator
And that shouldn't matter. The stress is evenly distributed, and the PCB is good enough to handle the bend. I've used an ASUS M3A that has a similar screw pattern. Swapped memory, played with connectors. Nothing can go wrong. The PCB will not bend enough to short anything.
Posted on Reply
#10
JrRacinFan
Served 5k and counting ...
I for one absolutely love the board other than its mounting flaw. Everything else looks mint. Good job MSI.
Posted on Reply
#11
suraswami
MKmodsI think what Hat meant is if you force the power plug or memory there is nothing behind the mobo to support it.
I use little plastic things in the holes but most people dont have them laying around
i370.photobucket.com/albums/oo142/Partspicts/001-7.jpg
I use them whenever I buy similar layout boards and it has been supporting really well. The SATA ports are also on the right spot, so I think the design is clean enough. Space around the CPU socket area seems decent to mount a monster cooler like Xiggy 1283.
Posted on Reply
#12
hat
Enthusiast
btarunrAnd that shouldn't matter. The stress is evenly distributed, and the PCB is good enough to handle the bend. I've used an ASUS M3A that has a similar screw pattern. Swapped memory, played with connectors. Nothing can go wrong. The PCB will not bend enough to short anything.
No, it doesn't really matter in the grand scheme of things, but it IS unfavorable.
Posted on Reply
#13
btarunr
Editor & Senior Moderator
hatNo, it doesn't really matter in the grand scheme of things, but it IS unfavorable.
If it being unfavourable isn't affecting the "grand scheme of things", it becomes irrelevant.
Posted on Reply
#14
werez
Well i was starting to worry ... p55 mainboards are not on the market yet , but i saw more pics with the i5 based motherboards than AM3 boards ( witch are around for a while ) . It`s nice to see AM3`s popping out here and there .
Posted on Reply
#15
PP Mguire
Wow MSI ftw. I was starting to worry AMDs DDR3 power would go with no SLI. I just wish we didnt have to continue to use the shitty older Nvidia chipsets.
Posted on Reply
#16
werez
The xfx am2+ 750a is a really bad board , hope MSI made some voodoo magic with this chipset .
Posted on Reply
#17
tastegw
werezThe xfx am2+ 750a is a really bad board , hope MSI made some voodoo magic with this chipset .
the only voodoo magic being made would be by nvidia :roll:
Posted on Reply
#18
btarunr
Editor & Senior Moderator
Never expect a good AMD motherboard from an NVIDIA partner.
Posted on Reply
#19
boomstik360
This board looks very cheap IMO. Especially the heatsinks. Definitely wouldn't buy even though I like MSI. I would wait to see what other manufacturers come up with, especially a new chipset.
Posted on Reply
Add your own comment
Apr 25th, 2024 05:08 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts