Friday, May 3rd 2013

Intel Core i7-4770K Overclocked to 7 GHz

Launch of Intel's Core i7-4770K "Haswell" processor may be a month away, but the chip has been in circulation for some time now. An overclocker going by the handle "rtiueuiurei" managed to get an engineering sample of the chip past the 7 GHz mark, 7012.65 MHz to be precise. A base clock of 91.07 MHz, multiplier of 77.0x, and a staggering 2.56V core voltage, unless CPU-Z read it wrong. A single 2 GB memory module was used; no other details were revealed. Core i7-4770K and a fleet of compatible socket LGA1150 motherboards launch around the first week of June.
Source: OCaholic
Add your own comment

54 Comments on Intel Core i7-4770K Overclocked to 7 GHz

#1
Nihilus
Looking awesome - seems ivy bridge-E will be a waste of time for intel.
Posted on Reply
#2
15th Warlock
Holy crap!!! 2.65V???!!! That can't be right, CPU-Z must definitely be reading that wrong, there's just no way a CPU that complex can take that much voltage, not even on N2O :eek:

As for the OC, other current CPUs have reached higher clocks, so unless Haswell has a much higher IPC throughput, I hope this is not the limit of its potential.

Impressive still considering this is an ES.
Posted on Reply
#3
Prima.Vera
15th WarlockHoly crap!!! 2.65V???!!! That can't be right, CPU-Z must definitely be reading that wrong, there's just no way a CPU that complex can take that much voltage, not even on N2O :eek:

As for the OC, other current CPUs have reached higher clocks, so unless Haswell has a much higher IPC throughput, I hope this is not the limit of its potential.

Impressive still considering this is an ES.
The question is what mobo can provide 2.65V ???????:eek:
Posted on Reply
#4
D4S4
+1, i think it should explode at that voltage
Posted on Reply
#6
NeoXF
15th WarlockImpressive still considering this is an ES.
Yup. But let's be fair and forward here... it's a CHERRY-PICKED ES sample...


Pretty nice, but what I'm more inclined to look at is the huge multi vs the downclocked BCLK.
Posted on Reply
#7
drdeathx
Either a cherry picked sample or just a plane lie. i side with the lie..... Noway can any board handle that voltage and I am sure there is no board that will even come remotely close in the bios settings
Posted on Reply
#9
NeoXF
drdeathxEither a cherry picked sample or just a plane lie. i side with the lie..... Noway can any board handle that voltage and I am sure there is no board that will even come remotely close in the bios settings
Yeah... whatever with these claims (even tho I think the voltage is a display error to begin with). Let's wait for real tests from real people with real production chips... for some real numbers. Especially on AIO water loops and high-end air.
Posted on Reply
#10
HumanSmoke
drdeathxEither a cherry picked sample or just a plane lie. i side with the lie..... Noway can any board handle that voltage and I am sure there is no board that will even come remotely close in the bios settings
1.62 is a pretty old version of CPU-Z, so likely incorrect reporting considering there are already Haswell OC results that are nowhere near that voltage (albeit not 7GHz)
Posted on Reply
#11
LDNL
That overclocks :twitch: with such low voltage
Posted on Reply
#12
Bo$$
Lab Extraordinaire
Posted on Reply
#13
HammerON
The Watchful Moderator
pjl321As you can see from this slightly more in-depth article, 2.65v must have been a mistake as you can hit 6.2GHz on just 1.2v.

Plus for those that were asking this was gone on a ASUS Maximus VI*Extreme Edition.


wccftech.com/intel-core-i7-4770k-overclocked-7-ghz-z87-motherboards-including-asus-maximus-vi-extreme-spotted/
Did you see the memory oc's from the article linked:
"Haswell Achieves 3322 MHz Memory Overclock

The most important thing to note is that the APACER memory on the Core i5-4670T rig was overclocked to an impressive 1661 MHz, which means an effective clock speed of 3322 Mhz. This is quiet impressive since these speeds are similar to what we would be looking at when DDR4 becomes standard in 2015.

You can check out the validations below for yourself."
Posted on Reply
#14
Jacez
I assumed that at 2.5v, the silicone would just explode, regardless of cooling.
Posted on Reply
#17
Steven B
with the same version of cpuz 1.62 which reads Vin instead of VCC, and which seems to be fun with haswell... lol...

Why not update CPUz, new cpuz shows vcore instead.
Posted on Reply
#18
RejZoR
High clock overclocks are useless. And if DICE or LN is involved it's just pointless. Make a every day 24/7 system and post a high clock. Water cooling is freely allowed. Now thats what i always get impressed about. Ppl who run highly clocked systems 24/7.

While 7GHz may sound impressive, it's just that, a worthless high clock you can't use for anything.
Posted on Reply
#20
buggalugs
RejZoRHigh clock overclocks are useless. And if DICE or LN is involved it's just pointless. Make a every day 24/7 system and post a high clock. Water cooling is freely allowed. Now thats what i always get impressed about. Ppl who run highly clocked systems 24/7.

While 7GHz may sound impressive, it's just that, a worthless high clock you can't use for anything.
I agree, this happens whenever a new CPU comes out, I can even remember Celerons being overclocked that high under the right conditions. Its pretty much normal with the right equipment.

24/7 overclocks are much more important to me.
Posted on Reply
#21
Aquinus
Resident Wat-man
drdeathxEither a cherry picked sample or just a plane lie. i side with the lie..... Noway can any board handle that voltage and I am sure there is no board that will even come remotely close in the bios settings
I'm 100% for this. On every modern motherboard I've owned in recent years the caps on the VRMs can handle no more then 2.1v. This would make caps on almost any board pop if the VRMs for the CPU ran that high. I'm inclined to say that it is fake or the readout is wrong, but there is no way that CPU is running 2.5v.
Posted on Reply
#23
stasio
RejZoRIt should just say: "I charged the Haswell with 2,65 volts."
On CPU-Z 1.62 from October 2012. :cool:
Posted on Reply
#24
EarthDog
Le sigh.... I wish I could add to this conversation... :)
Posted on Reply
Add your own comment
Apr 25th, 2024 10:25 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts