ATIFlash 4.07
atiflash_407.zip (236.3 KB)
MD5 Checksum:
D22803F56B6E431BA6D2CFC8EBA49547
...
Download Now
| File size: | 236.3 KB |
|---|---|
| Publisher: | ATI Technologies |
| Downloads: | 48,292 (10.9 GB) |
| Posted: | Mar 29, 2013 |
| Updated: | Mar 29th, 2013 |
| Operating System: | DOS |
Newer version available:
ATIFlash 4.17
Exact changes unknown.
Version History
3.79
- Fix issue with flashing Atmel AT25F512B ROMs
3.78
- Fix issue with flashing SST ROMs
3.77
- Fix -mb flag for Evergreen series asics when modifying SSID and SSVID
3.76
- Add support winbond W25X80A
3.75
- Add "-lockrom" and "-unlockrom" in Atiflash to lock rom for protection
3.70
- FIX: correctly report flash error code under linux
- FIX: correctly detect PCI devices under linux
- FIX: Fixed segumentation fault when doing -pa -pavbpn on a gfx card with an invalid vbios part number
3.67
- update RV790 DID
3.66
- update BN number to 128
3.65
- Add RV740
3.64
- Fix Flash on AT25FS010N
3.63
- Add New ROM support for Atmel AT25FS010N
3.62
- Fix the save function to save bios > 64K
- Fix the RV710 flash BIOS configuration to ensure it didn't triggle CTF
3.61
- Fix mb option to save the entire rom size if rom size is bigger than bios size
3.60s
- Add support for RV710
3.60
- Use SCLK to flash BIOS on RV730 only (SCLK will be scaled down while flashing the BIOS)
3.59
- Add RV730 support
3.58
- fix pa paramter, synchronize the same behaviour as ATIWinFlash
3.57
- Add R700 Support
- Reduce size
3.56
- fix corrupted zip file. Same release as 3.55
3.55
- add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
- add partial check for -pavbpn
3.54
- Add "nw" in help
3.53
- Add unique identifier for Ry7xx
3.52
- Add RV770 device ID support
3.51
- add -AMD flag to allow searching for devices with AMD vendor ID
3.50
- update SPI write sequence to check for both WREN and BUSY bits to be deasserted before verifying the write (solves issues seen with intermittent write failures)
3.49
- update description for RV670 slave devices to identify uniquely on Gemini boards
3.48
- correctly print Old and New P/N when flashing with newer bioses
3.47
- explicitly identify RV635 ASICs
3.46
- fix problems with GPIO19 asserting the CTF signal on RV670 boards
3.45
- fix problems with crashes on some systems when flashing onto blank ROMs
3.43
- added -pavbpn (allows the use of -pa with VBIOS PN)
added support for new ROM used by multimedia cards (Quito and Lima)
3.42
- fix -mb command for Ry6xx
3.41
- fix Ry6xx SST support
3.40
- fix RV610 + Rialto hang issue
3.39
- fix RV610 write issue
3.38
- Add Quito support
3.35
- resolved -i/-ai corruption issue
3.34
- -ai now displays full PCI ID information
- ATMEL flash procedurce redesigned for stability/reduced overall flash time
- -ai -scansii combination will report SST/ATMEL firmware revision
3.33
- internal release
3.32
- add flashing over 128KB
3.31
- resolved pak issues with SST/ATMEL
3.30
- update device ID support for RV630/M76 & 0x000 for Ry6xx
3.29
- add new option -pak to build flash package
3.28 11/02/06
- add new option -fa to force flashing if the ROM is already programmed
- add new option -fm to force flashing if legacy memory config mismatch
- add new option -fs to force flashing if SSID mismatch
- add new option -fp to force flashing if BIOS P/N mismatch
- add new command -pa to search and program multiple adapters according to BIOS P/N
- add new option -padevid to search for adapters of a specific PCI device ID when used with -pa command
- add new option -passid to search for adapters of a specific subsystem ID when used with -pa command
- add new option -pasvid to search for adapters of a specific subsystem vendor ID when used with -pa command
3.00 09/08/04
- initial release
3.01 09/16/04
- adjust bus scanning sequence
3.02 09/30/04
- add Rialto support
3.03 10/19/04
- fix issues for Rialto
3.04 12/01/04
- remove 32K limit for Rialto
3.05 12/09/04
- add RN50 support
3.06 03/03/05
- fix issue in flashing secondary adapters
3.07 03/15/05
- fix SST support with -sst option
- fix infinite looping on write failure
3.08 04/05/05
- display BIOS P/N in -i option
3.09 04/29/05
- add -mi command to modify SSID in ROM image
- add support R530
3.10 09/30/05
- support write-protected sector on 128k serial flash ROMs
- add RIO support
3.11 11/11/05
- mask out GENERICD pad output register clear to avoid setting VDDC on A520xx-20 PCB
3.12 11/14/05
- add verified LIMA support
3.13 02/03/06
- add new option -mb for modifying BIOS SSID, SVID, BIOS P/N and bootup message
3.14 02/13/06
- add update SiImage firmware
3.15 02/24/06
- add support for Warhol (RV570/M68/RV560/M67) device IDs
- mask out GPIO[6..3] clear to avoid overwriting MVP settings on RV570/RV560
3.16 04/24/06
- allow autodetect and/or pin specification for SiImage firmware updating
3.17 05/23/06
- fix issues with sst ROMs
3.18 05/26/06
- fix SiImage Firmware update issue
3.19 06/02/06
- improve SiImage Firmware process
3.20 06/09/06
- Add new options, -reboot, -pci, -pcie, -agp, -noagp, -nopcie
- Fix SiI1930 Mobile FW Update issues
3.21
- add new command -ai, advanced information
- add new options -log, -logappend
- reformat help menu, help menu appears with use of -h, /h, -? or /?
3.22
- add display more BIOS information when flashing
- add reboot message when flashing completed successfully
3.23
- fix minor message issue
3.24
- Update Lima Support
3.25
- Add RV550/M71 Support
