• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Need help with a pencil mod.

Joined
Aug 26, 2008
Messages
639 (0.11/day)
Location
Fresno, CA
System Name MFCJA
Processor Intel 4770k
Motherboard MSI Z87-G45
Cooling Intel Liquid Cooler
Memory Corsair DDR3 4X4GB
Video Card(s) MSI GTX 770
Storage 120GB SSD/1TB
Display(s) 23" Acer H233H
Case Corsair Mid Tower
Power Supply Corsair TX850M
Software Windows 7 64 bit
Hello, I am relatively new to this board and was wondering if I could get some help with a pencil mod. I have little knowledge of the procedure but understand you must shade a resistor in order to solve a v droop problem.

Well I have an EVGA 780i SLI mother board and I think I know where the resistors I am looking to mod are. I don't know what to do in the next step. I know you must have a 2B/4B pencil (Have no clue what the numbers mean or where to get a 2B or 4B pencil) and I think you have to shade it 2 to 3 times back and forth. Anyways I'm pretty ignorant of what I need to do and could use some help. It's killing me to have a Q6600 (SALCR) and have v droop so bad that I have to set CPU voltage to 1.58v to be stable at 3.6ghz.

Once again any help would be appreciated.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
thats pretty much it. you shade over it until the vdroop goes away.

FYI, dont make it go ENTIRELY away. A little bit of vdroop is a good thing for the safety of the hardware according to an article i read a while back.

(if you set 1.45v and it runs at 1.435v... whatever. its close enough)
 
Joined
Aug 26, 2008
Messages
639 (0.11/day)
Location
Fresno, CA
System Name MFCJA
Processor Intel 4770k
Motherboard MSI Z87-G45
Cooling Intel Liquid Cooler
Memory Corsair DDR3 4X4GB
Video Card(s) MSI GTX 770
Storage 120GB SSD/1TB
Display(s) 23" Acer H233H
Case Corsair Mid Tower
Power Supply Corsair TX850M
Software Windows 7 64 bit
Alright do I need any special type of pencil? and do I need any other equipment?
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Alright do I need any special type of pencil? and do I need any other equipment?

you need a 2B pencil as you said in the first post.

A way to measure the voltage would be good, i just sat my lan rig in the BIOS and watched the CPU voltage as i stroked the resistor, and then put some tape over it when i was done.
 
Joined
Aug 26, 2008
Messages
639 (0.11/day)
Location
Fresno, CA
System Name MFCJA
Processor Intel 4770k
Motherboard MSI Z87-G45
Cooling Intel Liquid Cooler
Memory Corsair DDR3 4X4GB
Video Card(s) MSI GTX 770
Storage 120GB SSD/1TB
Display(s) 23" Acer H233H
Case Corsair Mid Tower
Power Supply Corsair TX850M
Software Windows 7 64 bit
Alright so it's okay to do this while your computer is on then. And did you use electrical tape? oh and one more thing, do you know where I could get a 2b pencil? Oh and do you shade over the entire resistor or is there parts you should stay away from? (I know man of many questions lol)
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Alright so it's okay to do this while your computer is on then. And did you use electrical tape? oh and one more thing, do you know where I could get a 2b pencil? Oh and do you shade over the entire resistor or is there parts you should stay away from? (I know man of many questions lol)

2B pencil - anywhere that sells pencils :p its one of the most common types.

I just used regular sticky tape, electrical tape tends to leave too much of a residue for my liking.

You shade from end to end, slowly.

its kinda like this
[]=[]

The part that does the actual resisting is in the middle, and what you're doing by shading over the top (connecting the two side parts) is letting some power pass through the pencil lead instead of through the resistor, increasing the voltage/total power. Just take it slowly, because you dont want it to raise up suddenly (EG, you set 1.4V and 1.6V comes out and boooom)
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
um shouldnt the fact that a digital multi meter is a must on this mod as well? Look at the ohms and see how much its changed/lowered b4 you turn it on and realize its way too much pencil.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
um shouldnt the fact that a digital multi meter is a must on this mod as well? Look at the ohms and see how much its changed/lowered b4 you turn it on and realize its way too much pencil.

not if you're doing it lightly and real time.

THe thing is, even if he checks the resistance he wont know if its enough or not without powering it on. I did mine with it running and without a multimeter, and had no ill effects - but i did go slowly, and i watched the voltage reading in the BIOS to know how it was going.

If you had NO reading whatsoever, then i would most certainly suggest a multimeter - but this aint a video card, and he CAN see the readings from his BIOS.
 
Joined
Aug 26, 2008
Messages
639 (0.11/day)
Location
Fresno, CA
System Name MFCJA
Processor Intel 4770k
Motherboard MSI Z87-G45
Cooling Intel Liquid Cooler
Memory Corsair DDR3 4X4GB
Video Card(s) MSI GTX 770
Storage 120GB SSD/1TB
Display(s) 23" Acer H233H
Case Corsair Mid Tower
Power Supply Corsair TX850M
Software Windows 7 64 bit
Alright thanks man and just to confirm you can have you computer running and monitor your voltage through your bios correct?
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Alright thanks man and just to confirm you can have you computer running and monitor your voltage through your bios correct?

thats how i did it.

It may be a lot easier to do it out of the case, so that you have more room/easier access. I had mine setup on a table when i did it.
 
Joined
Oct 12, 2008
Messages
1,197 (0.21/day)
Location
Asia, PH
Processor Q6600 @ 3.6GHz | P4 @ 2.1GHz
Motherboard Asus Commando ROG (Vdroop mod) | Asus P4V8X-MX
Cooling MegaShadow w/ 2x Scythe Slipstream MX-2 Paste + Kama Bay + 4x120mm case fan | stock Intel
Memory Kingston 4x1GB DDR2 @ 800MHz w/ OCZ XTC cooler | 1GB DDR @ 400MHz
Video Card(s) Palit GTX 260 1792mb 448bit @ 713/1458/1116x2 | GeForce 4 MX 440 AGP8X 64mb 64bit
Storage 640GB WD AACS 250GB Excelstor 160GB Seagate | 40GB WD
Display(s) Samsung T220, Samsung 32" 1080P | LG L1752S
Case Gigabyte 3D Aurora 570 | Trendsonic mid tower
Audio Device(s) Asus Supreme FX (Creative Inspire 5.1 speaker), Samsung HT-Z220 | Onboard audio (2.1 Speaker)
Power Supply Gigabyte Odin Pro 800W | 550W generic
Software Vista Ultimate 64 SP2 | XP Pro 32 SP3
Benchmark Scores 3Dmark06 - 17,348 Vantage - P13,510 Super PI 1M - 12.765s @ 4.1GHz GenericCPUbench - 6,864 ms 38,
I also have a question regarding pencil mod coz my mobo asus commando I have done d pencil modding trick to reduce vcore the vdroop is entirely gone but when on load it goes up by .01-.03 is this normal? on my vcore now it is set to 1.25 @ bios idling @ 1.24 when full load it goes up to 1.26 is this fine? it's not dropping but its increasing the vcore :eek:
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
I also have a question regarding pencil mod coz my mobo asus commando I have done d pencil modding trick to reduce vcore the vdroop is entirely gone but when on load it goes up by .01-.03 is this normal? on my vcore now it is set to 1.25 @ bios idling @ 1.24 when full load it goes up to 1.26 is this fine? it's not dropping but its increasing the vcore :eek:

increasing means you went too far. IMO, that would slowly degrade the life of the chip.

(I read an in depth article a while ago, and it stated that vdroop was actually intentionally left there to prevent damage during bootups of a PC. Thats why i feel that reducing Vdroop is better than totally eliminating it)
 
Joined
Oct 12, 2008
Messages
1,197 (0.21/day)
Location
Asia, PH
Processor Q6600 @ 3.6GHz | P4 @ 2.1GHz
Motherboard Asus Commando ROG (Vdroop mod) | Asus P4V8X-MX
Cooling MegaShadow w/ 2x Scythe Slipstream MX-2 Paste + Kama Bay + 4x120mm case fan | stock Intel
Memory Kingston 4x1GB DDR2 @ 800MHz w/ OCZ XTC cooler | 1GB DDR @ 400MHz
Video Card(s) Palit GTX 260 1792mb 448bit @ 713/1458/1116x2 | GeForce 4 MX 440 AGP8X 64mb 64bit
Storage 640GB WD AACS 250GB Excelstor 160GB Seagate | 40GB WD
Display(s) Samsung T220, Samsung 32" 1080P | LG L1752S
Case Gigabyte 3D Aurora 570 | Trendsonic mid tower
Audio Device(s) Asus Supreme FX (Creative Inspire 5.1 speaker), Samsung HT-Z220 | Onboard audio (2.1 Speaker)
Power Supply Gigabyte Odin Pro 800W | 550W generic
Software Vista Ultimate 64 SP2 | XP Pro 32 SP3
Benchmark Scores 3Dmark06 - 17,348 Vantage - P13,510 Super PI 1M - 12.765s @ 4.1GHz GenericCPUbench - 6,864 ms 38,
increasing means you went too far. IMO, that would slowly degrade the life of the chip.

(I read an in depth article a while ago, and it stated that vdroop was actually intentionally left there to prevent damage during bootups of a PC. Thats why i feel that reducing Vdroop is better than totally eliminating it)

:eek: should I undo and erase d pencil mod I did?
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
wow , you need go higher , good luck
 
Joined
Aug 26, 2008
Messages
639 (0.11/day)
Location
Fresno, CA
System Name MFCJA
Processor Intel 4770k
Motherboard MSI Z87-G45
Cooling Intel Liquid Cooler
Memory Corsair DDR3 4X4GB
Video Card(s) MSI GTX 770
Storage 120GB SSD/1TB
Display(s) 23" Acer H233H
Case Corsair Mid Tower
Power Supply Corsair TX850M
Software Windows 7 64 bit
Alrighty well all done with the mod and I'd have to say it was a success. I was experiencing .08 v droop under load and am now experiencing no v droop =). Thanks for all the help mussels =)
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
no probs CJA.

its easier than most people make it out to be, simply because they did it on video cards where its more complex.
 
Joined
Oct 12, 2008
Messages
1,197 (0.21/day)
Location
Asia, PH
Processor Q6600 @ 3.6GHz | P4 @ 2.1GHz
Motherboard Asus Commando ROG (Vdroop mod) | Asus P4V8X-MX
Cooling MegaShadow w/ 2x Scythe Slipstream MX-2 Paste + Kama Bay + 4x120mm case fan | stock Intel
Memory Kingston 4x1GB DDR2 @ 800MHz w/ OCZ XTC cooler | 1GB DDR @ 400MHz
Video Card(s) Palit GTX 260 1792mb 448bit @ 713/1458/1116x2 | GeForce 4 MX 440 AGP8X 64mb 64bit
Storage 640GB WD AACS 250GB Excelstor 160GB Seagate | 40GB WD
Display(s) Samsung T220, Samsung 32" 1080P | LG L1752S
Case Gigabyte 3D Aurora 570 | Trendsonic mid tower
Audio Device(s) Asus Supreme FX (Creative Inspire 5.1 speaker), Samsung HT-Z220 | Onboard audio (2.1 Speaker)
Power Supply Gigabyte Odin Pro 800W | 550W generic
Software Vista Ultimate 64 SP2 | XP Pro 32 SP3
Benchmark Scores 3Dmark06 - 17,348 Vantage - P13,510 Super PI 1M - 12.765s @ 4.1GHz GenericCPUbench - 6,864 ms 38,
or at least reduce it a little.

I have erased using Q-tip set 1.25v bios vcore and now: idle in windows 1.23 under load using prime 95 1.23 :) tnx for your useful tip mussels :)
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.21/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
I have erased using Q-tip set 1.25v bios vcore and now: idle in windows 1.23 under load using prime 95 1.23 :) tnx for your useful tip mussels :)

sounds good.

No probs guys, its the kinda thing you want as much info as you can before starting.
 
Top