Lego Batman (PC) Crashes on 'Zoos Comapny Level'

[deeppurple247]

Hello,

I bought lego batman a week ago and everything was fine until I got to the 4th level (Zoos company) in the Penguin (Hero) section. Basically the game goes into the level but as soon as I move the joypad cursor to move the character the game completely shuts down with a message asking if I want to send an error report. The only thing I can think of is that this is the only level so far that has falling snow, and my video drivers for some reason can't cope with it.

Any help would be much appreciated.

Thanks

Alex

 

[kenkickr]

Could you please list your system specs or fill out the spec section. What video card are you using and with what drivers?

 

[CDdude55]

I would but that game for the consoles.IMO

 

[ShadowFold]

I would but that game for the consoles.IMO

Its on PC too

 

[WhiteLotus]

could be driver related, bad install, or not enough graphical processing power. try lowering the graphic setting (if you can) to see if it is related to the latter.

 

[deeppurple247]

Hi,

Thanks for the input.

Below is some information I got from a directX diagnostic file if it helps.

SYSTEM INFORMATION

Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.080814-1242)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Dell DV051
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A03
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
Memory: 2038MB RAM
Page File: 687MB used, 3243MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

DISPLAY DEVICES

Card name: Intel(R) 82915G/GV/910GL Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(R) 82915G/GV/910GL Express Chipset
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2582&SUBSYS_01C41028&REV_04
Display Memory: 128.0 MB
Current Mode: 1920 x 1200 (32 bit) (60Hz)
Monitor: Default Monitor
Driver Name: ialmrnt5.dll
Driver Version: 6.14.0010.4410 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/14/2005 20:06:58, 36990 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 10/14/2005 20:15:18, 1302812 bytes
Device Identifier: {D7B78E66-66C2-11CF-A262-CE21A5C2CB35}
Vendor ID: 0x8086
Device ID: 0x2582
SubSys ID: 0x01C41028
Revision ID: 0x0004
Revision ID: 0x0004
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available

 

[kenkickr]

Here's a link to the newest drivers, built back in 2007. http://downloadcenter.intel.com/T8C...e&agr=Y&ProductID=1765&DwnldID=12536&lang=eng

Spec wise you shouldn't have a problem:
Minimum Requirements:
Processor: 1.0 GHz Intel Pentium III or AMD Athlon XP /
Display Card!: 100% DirectX 9.0c compatible 128 MB graphics card with Shader Model 2.0 capability /
Memory: 256MB
Free Disk Space: 4.2GB
Operating System: Windows XP/Vista

Recommended Requirements:
Processor: 3.0 GHz Intel Pentium 4 or AMD Athlon 64
Display Card!: 100% DirectX 9.0c compatible 512 MB graphics card with Shader Model 3.0 capability
Memory: 512MB
Free Disk Space: 4.2GB
Operating System: Windows XP/Windows Vista