• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Antec Mini P180 Watercooling Suggestions?

Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
I plan to build a mATX system, and watercool it. I am 95% set on an Antec Mini P180, but it is going to prove a challenge to watercool.

I may also be using 1 or two full length video cards, so keep in mind that the lower hdd cage will most likely be removed, and a lot of that space will be taken up (how much, I'm not sure).

I will be using a single 5.25" drive, and either one or two 3.5" drives.

I wanted to get some ideas from you guys. If you can, please illustrate your work with some simple pictures. here are some good pictures of the interior.







Antec's Site: http://www.antec.com/usa/productDetails.php?id=81804&lan=us#

Review: http://www.silentpcreview.com/article810-page1.html
 
Joined
Nov 16, 2006
Messages
2,724 (0.43/day)
Location
Blighty
Processor R7 5800x3D
Motherboard MSI x570 Tomahawk
Cooling XSPC Raystorm Edge,EK QS P420M,EK D5pwm Revo Res
Memory 32gb Corsair Vengeance RT 3600 cl16
Video Card(s) Zotac 3070ti Amp Extreme
Storage Samsung 980pro 1tb x2
Display(s) MSI MPG321QRF QD
Case Corsair 7000D
Power Supply EVGA 1000 P2
Mouse G900
Keyboard Corsair k60 RGB PRO
Software Win 11
Damn, that is quite a tight little case to fit watercooling in, i'd suggest using a Bitspower resevoir on a laing DDC pump fitted in the front of the case directly behind the front fan, and a 2x120mm radiator mounted to the rear 120mm fan mount with a Swiftech radbox.

If the graphics card is too long to fit the pump/resevoir combination in, a Swiftech Microres would be another option, fitted to the rear panel next to the graphics card (yes, it would fit), and a DDC pump, preferably with a performance top (one that uses a side inlet instead of one on top) , again mounted in the removable lower hard drive cage space (they're very low profile, so would fit underneath a video card easily).
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
One thing I forgot to mention: All watercooling MUST be internal. I will avoid external parts if at all possible.

Good place for a micro res. That's what I usually use anyway. And the DDC is much smaller than a Laing D5.

BTW, I'm not afraid to cut and drill.
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
Any ideas, or am I going to have to start breaking out Google SketchUp again?
 

Woody112

New Member
Joined
Jan 18, 2008
Messages
562 (0.10/day)
Location
Florida
System Name Woody's MBP
Processor 2.4 C2D
Cooling Frikin Air
Memory Munskin 2x2 gig 1066mhz
Video Card(s) 9400gt/9600gt W/512mb
Storage 1TB WD scorpio blue
Display(s) 15.4" on lapie/ 24" Acer P241w on the wall/ 52" LCD TV
Software OSX/ Win 7
you can mount 120mm radiator on the rear vent. A Koolance 5.25" bay mount resivor and pump assy will fit easly, they go for about 200 dollars.
You might also be able to fit a dual core to the top, but with fans installed would probable get in the way.
However on such a small chassie you are going to restrict air flow quit a bit with an internal system.
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
Hiya DD. Think there is any possibility to put a BIX up at the top where the big fan is and using right angle connectors for the dvd drive?

My other thoughts would be to use a bay reservoir and put a pump near the power supply in the lower left. It can be done but very VERY cramped.
 
Last edited:
D

Deleted member 24505

Guest
Heres how i would do it.With some mountain mods hdd plates to hold the hdd/s.

 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
Any way anybody think I can fit a PA160 into this thing?
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
I'm performing some thread necromancy because I finally bought the darn case.

I have a couple of ideas, and I will be illustrating them soon. In the meantime, suggestions/ideas/etc. would be great!

I don't have enough monies to watercool it yet, and I want some time with the case in person to see what would work best anyway, but it is a plan.

I might be the first one with a watercooled crossfire Mini P180. I've seen crossfired ones, and I've seen watercooled ones, but if someone finds me a watercooled crossfire one, I would appreciate it. Also, any Mini P180 builds you find that you like, post them here so I can get some more ideas :)
 
Joined
Jun 2, 2007
Messages
5,106 (0.83/day)
Location
Kansas
Processor Core i5 3570K
Motherboard AsRock z77 Pro4
Cooling Zalman CNPS10X Extreme
Memory 2x4GB GSkill Sniper
Video Card(s) MSI GTX970 Gaming
Storage 240GB OCZ ARC 100, Samsung Spinpoint F3 1TB
Display(s) LG 23" 1920x1080
Case Antec P100
Audio Device(s) Onboard
Power Supply Antec Edge 750W
Software Windows 8.1 Pro 64

1Kurgan1

The Knife in your Back
Joined
Dec 8, 2008
Messages
10,421 (1.86/day)
Location
Duluth, Minnesota
System Name My Comp | Fiancees Comp
Processor i7 5820k @ 4.6Ghz 1.285v| i5 2500k
Motherboard MSI x99 SLI Plus | AsRock Z77 Pro 3
Cooling Watercooled
Memory 16GB DDR4 2400 @ 2666 | 12GB DDR3 1600
Video Card(s) AMD R9 290x | MSI 5850 OC
Storage 128gb SSD + 2x 2TB | 2TB
Display(s) Asus 27" LCD | 25" Hanns G
Case CM Storm | CM Elite 430
Audio Device(s) Creative Recon 3D PCIe
Power Supply Enermax Galaxy 1250W | Rosewill 630w
Mouse Logitech G700s | Logitech G100s
Keyboard Logitech G901 | Logitech G105
Software Win 8.1 Ultimate x64 | Win 8.1 Ultimate x64
Benchmark Scores 3D Mark - Fire Strike Extreme - 4403
It seems very simple to me. Mount a 120mm rad on the inside in the back. I'm not sure how much room there is, here's a thin rad solution.

http://www.xoxide.com/thermaltake-aqua-tmg1-radiator.html

If you can fit a fatter radiator in there do it to get some better cooling. That single rad should really be enough cooling especially if you can get a nice 120 in there. But if your still worried there are 2 other options.

Simple would be...

http://www.xoxide.com/thermaltake-aquabay-m2-radiator.html

Mount that in the bottom 2 bay spot. And the second option is, take out that second HDD cage that mounts 2 HD's And put a radiator on the back of that 120mm fan.

Now you could do all 3, this would put you with 3 x 120mm raditaors. If you go with 2 it makes the pump mounting easy because you can just stick it in one of the spots your not using. But if you go with the 3 setup it's gonna be tight and you'll most likely have to place the pump behind the radiator in the HDD spots.

That is a really nice mini case and looks much easier to WC than any of the others I have seen.
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
This guy's sketched similar stuff--may get some ideas here.

http://www.xtremesystems.org/forums/showthread.php?t=185174

Looked @ that link last night :toast:

These are the links I have so far:

http://www.xtremesystems.org/forums/showpost.php?p=3518281&postcount=223

http://www.xtremesystems.org/forums/showpost.php?p=3422018&postcount=129

http://forums.overclockers.co.uk/showthread.php?t=17955289

http://www.xtremesystems.org/forums/showpost.php?p=2942500&postcount=15

http://www.xtremesystems.org/forums/showpost.php?p=2942693&postcount=22

http://www.xtremesystems.org/forums/showpost.php?p=2942760&postcount=26

http://www.xtremesystems.org/forums/showthread.php?t=205393

It seems very simple to me. Mount a 120mm rad on the inside in the back. I'm not sure how much room there is, here's a thin rad solution.

http://www.xoxide.com/thermaltake-aqua-tmg1-radiator.html

If you can fit a fatter radiator in there do it to get some better cooling. That single rad should really be enough cooling especially if you can get a nice 120 in there. But if your still worried there are 2 other options.

Simple would be...

http://www.xoxide.com/thermaltake-aquabay-m2-radiator.html

Mount that in the bottom 2 bay spot. And the second option is, take out that second HDD cage that mounts 2 HD's And put a radiator on the back of that 120mm fan.

Now you could do all 3, this would put you with 3 x 120mm raditaors. If you go with 2 it makes the pump mounting easy because you can just stick it in one of the spots your not using. But if you go with the 3 setup it's gonna be tight and you'll most likely have to place the pump behind the radiator in the HDD spots.

That is a really nice mini case and looks much easier to WC than any of the others I have seen.

I won't use ThermalTake radiators, but the single 120mm radiator options are too easy for me. I want to do at LEAST a PA160 or a 240mm radiator. I was looking at a 280mm.

Eventually, I will have waterblocks on the video cards (I think I'm doing GPU only blocks this time around, rather than the full-cover blocks that you have to buy with every card) and hopefully a NB waterblock as well, if not MOFSET, too ;)
 
Last edited:

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
I won't use ThermalTake radiators, but the single 120mm radiator options are too easy for me. I want to do at LEAST a PA160 or a 240mm radiator. I was looking at a 280mm.

Eventually, I will have waterblocks on the video cards (I think I'm doing GPU only blocks this time around, rather than the full-cover blocks that you have to buy with every card) and hopefully a NB waterblock as well, if not MOFSET, too ;)

DD, sometimes easy is better than harder-to-feat practical. :rolleyes: Although, I would absolutely love to see you fit a BIX double 240 in there!:eek:
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black

1Kurgan1

The Knife in your Back
Joined
Dec 8, 2008
Messages
10,421 (1.86/day)
Location
Duluth, Minnesota
System Name My Comp | Fiancees Comp
Processor i7 5820k @ 4.6Ghz 1.285v| i5 2500k
Motherboard MSI x99 SLI Plus | AsRock Z77 Pro 3
Cooling Watercooled
Memory 16GB DDR4 2400 @ 2666 | 12GB DDR3 1600
Video Card(s) AMD R9 290x | MSI 5850 OC
Storage 128gb SSD + 2x 2TB | 2TB
Display(s) Asus 27" LCD | 25" Hanns G
Case CM Storm | CM Elite 430
Audio Device(s) Creative Recon 3D PCIe
Power Supply Enermax Galaxy 1250W | Rosewill 630w
Mouse Logitech G700s | Logitech G100s
Keyboard Logitech G901 | Logitech G105
Software Win 8.1 Ultimate x64 | Win 8.1 Ultimate x64
Benchmark Scores 3D Mark - Fire Strike Extreme - 4403
I won't use ThermalTake radiators, but the single 120mm radiator options are too easy for me. I want to do at LEAST a PA160 or a 240mm radiator. I was looking at a 280mm.

Eventually, I will have waterblocks on the video cards (I think I'm doing GPU only blocks this time around, rather than the full-cover blocks that you have to buy with every card) and hopefully a NB waterblock as well, if not MOFSET, too ;)

You got to think practically, there isn't one spot in that case for a 240mm rad to sit. Now you could easily do it if you mount externally on the back. Those small form factor cases are meant to save space and that one is a very nice design. But they just aren't meant to WC also, need a bit more room for something like that. I really think your only going to be able to fit 120's in there. If you get 3x 120's in there that will be enough to cool your current proc and video card. And that 280 rad you listed is nice, but that case just doesn't for sure have the room for that. That radiator has to be 35mm thick, then add 2 fans that will be 30mm thick, just no place for that. Plus the length, that thing is probably almost as tall as that entire case.
 
Joined
Oct 6, 2005
Messages
10,242 (1.52/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
I don't want to mount it externally. I'm not afraid to modify the case, which is why I'm proposing things that aren't easy to do.

And this case does not save space. It is 4 inches shorter, and 5 inches less deep than my old Cosmos S, which is HUGE. I am actually getting the case VERY soon, as in tomorrow :D
 
Top