- Joined
- Jun 25, 2008
- Messages
- 2,431 (0.42/day)
| System Name | Dell Workstation t5810 |
|---|---|
| Processor | Xeon CPU's E5-2683 v4 Broadwell-E Technology |
| Motherboard | Broadwell-E X99 |
| Cooling | Default fan System Level 3 |
| Memory | 48GB DDR4 |
| Video Card(s) | ASRock Vega 56 8GB |
| Storage | 4 External SSD, 4 External HDD |
| Display(s) | HP 27m LCD |
| Case | Dell Precision 7810 Case |
| Audio Device(s) | RealTek High Definition |
| Power Supply | 825 Watts PSU |
| Mouse | Soundless Black Quiet Mouse |
| Keyboard | Dell Black |
| Software | Windows Pro 10 x64 |
Hey guys, looks like i will be upgrading my p3 from 600mhz to higher, but i wanted to know, does anyone have any reliable , safe sites where i can i guess grab the chip? Here is some information from my rig:
My Model : MFG Date: 5/12/00,
Micro ATX, BRY-GP7i-600SE
More information:
CPU Properties:
CPU Type Intel Pentium IIIE, 600 MHz (6 x 100)
CPU Alias Coppermine
CPU Stepping cB0
Instruction Set x86, MMX, SSE
Original Clock 600 MHz
L1 Code Cache 16 KB
L1 Data Cache 16 KB
L2 Cache 256 KB (On-Die, ATC, Full-Speed)
CPU Physical Info:
Package Type 370 Pin FC-PGA
Package Size 4.95 cm x 4.95 cm
Transistors 28.1 million
Process Technology 6M, 0.18 um, CMOS
Die Size 104 mm2
Core Voltage 1.60 / 1.65 V
I/O Voltage 3.3 V
Typical Power 11 - 25 W (depending on clock speed)
Maximum Power 16.0 - 37.5 W (depending on clock speed)
Motherboard Name Intel Willow Springs 2 WL810E
Front Side Bus Properties:
Bus Type Intel GTL+
Bus Width 64-bit
Real Clock 100 MHz
Effective Clock 100 MHz
Bandwidth 800 MB/s
Chipset Bus Properties:
Bus Type Intel Hub Interface
Bus Width 8-bit
Motherboard Physical Info:
CPU Sockets/Slots 1
Expansion Slots 4 PCI
RAM Slots 2 DIMM
Integrated Devices Audio, Video
Form Factor Micro ATX
Motherboard Size 220 mm x 240 mm
Motherboard Chipset i810E
Question, do i have to buy a better PSU to handle more then 600mhz, or i should be just fine? If i need to upgrade my PSU, well this is going to really hard, because this is my model:
This seems to be the same model which i am using:
http://www.ascendtech.us/itemdesc.asp?ic=CSPGW90WATT&eq=&Tp=
My tower is small, so i think i need the same size with higher watts
Thanks
My Model : MFG Date: 5/12/00,
Micro ATX, BRY-GP7i-600SE
More information:
CPU Properties:
CPU Type Intel Pentium IIIE, 600 MHz (6 x 100)
CPU Alias Coppermine
CPU Stepping cB0
Instruction Set x86, MMX, SSE
Original Clock 600 MHz
L1 Code Cache 16 KB
L1 Data Cache 16 KB
L2 Cache 256 KB (On-Die, ATC, Full-Speed)
CPU Physical Info:
Package Type 370 Pin FC-PGA
Package Size 4.95 cm x 4.95 cm
Transistors 28.1 million
Process Technology 6M, 0.18 um, CMOS
Die Size 104 mm2
Core Voltage 1.60 / 1.65 V
I/O Voltage 3.3 V
Typical Power 11 - 25 W (depending on clock speed)
Maximum Power 16.0 - 37.5 W (depending on clock speed)
Motherboard Name Intel Willow Springs 2 WL810E
Front Side Bus Properties:
Bus Type Intel GTL+
Bus Width 64-bit
Real Clock 100 MHz
Effective Clock 100 MHz
Bandwidth 800 MB/s
Chipset Bus Properties:
Bus Type Intel Hub Interface
Bus Width 8-bit
Motherboard Physical Info:
CPU Sockets/Slots 1
Expansion Slots 4 PCI
RAM Slots 2 DIMM
Integrated Devices Audio, Video
Form Factor Micro ATX
Motherboard Size 220 mm x 240 mm
Motherboard Chipset i810E
Question, do i have to buy a better PSU to handle more then 600mhz, or i should be just fine? If i need to upgrade my PSU, well this is going to really hard, because this is my model:
This seems to be the same model which i am using:
http://www.ascendtech.us/itemdesc.asp?ic=CSPGW90WATT&eq=&Tp=
My tower is small, so i think i need the same size with higher watts
Thanks
I don't get it either but o well I just try to help him
