- Joined
- Jan 28, 2009
- Messages
- 109 (0.02/day)
Processor | Intel i7 4790k 4.4 GHz 1.2v |
---|---|
Motherboard | Gigabyte Z-97x Gaming 5 |
Cooling | Zalman CNPS9900NT |
Memory | 24GB Corsair 2133Mhz |
Video Card(s) | XFX Ghost 7950 |
Storage | OCZ Agility 3 120GB, Toshiba P300 3TB |
Display(s) | Left: Dell SP2208WFP Center: Acer S240HL Right: LG Flatron L225ws |
Case | Coolermaster Cosmos |
Audio Device(s) | Creative X-Fi Mobo |
Power Supply | EVGS Supernova G2 850w |
Software | Windows 10 X64 |
hi. at this moment in time i have an antec 900 and a thermaltake big water 745. however there is a problem with this combination
after some devious mounting using the screws from my akasa evo 120 i managed to mount both rads on my case. the reult however, is this:
as you can see, its none too pretty, and poses a clearance hazard, with the possibility of damage. what i am asking is, well, in the title really, can the rad from this kit fit into the top of a cosmos 1000?
i have looked at the cosmos s, but the potential noise level, that iffy power "button" and its hdd arrangement put me off somewhat.
putting the rads inside is really inportant as i seek to have less noise (the fans on the rads are pulling through air, producing a large amount of noise against the grill to protect fingers and it is near impossible to see to connect anything to the mobo.
any advice is greatly apperciated.
after some devious mounting using the screws from my akasa evo 120 i managed to mount both rads on my case. the reult however, is this:
as you can see, its none too pretty, and poses a clearance hazard, with the possibility of damage. what i am asking is, well, in the title really, can the rad from this kit fit into the top of a cosmos 1000?
i have looked at the cosmos s, but the potential noise level, that iffy power "button" and its hdd arrangement put me off somewhat.
putting the rads inside is really inportant as i seek to have less noise (the fans on the rads are pulling through air, producing a large amount of noise against the grill to protect fingers and it is near impossible to see to connect anything to the mobo.
any advice is greatly apperciated.