• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Bent Motherboard

Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
Hello everbody,

Basically my Motherboard is bent. I installed a new heatsink WITH a backplate. and now the ports in the I/O Shield Plate don't align properly. Screwing the Motherboard in the case doesn't seem to solve the problem.





What should I do?
 

1Kurgan1

The Knife in your Back
Joined
Dec 8, 2008
Messages
10,421 (1.86/day)
Location
Duluth, Minnesota
System Name My Comp | Fiancees Comp
Processor i7 5820k @ 4.6Ghz 1.285v| i5 2500k
Motherboard MSI x99 SLI Plus | AsRock Z77 Pro 3
Cooling Watercooled
Memory 16GB DDR4 2400 @ 2666 | 12GB DDR3 1600
Video Card(s) AMD R9 290x | MSI 5850 OC
Storage 128gb SSD + 2x 2TB | 2TB
Display(s) Asus 27" LCD | 25" Hanns G
Case CM Storm | CM Elite 430
Audio Device(s) Creative Recon 3D PCIe
Power Supply Enermax Galaxy 1250W | Rosewill 630w
Mouse Logitech G700s | Logitech G100s
Keyboard Logitech G901 | Logitech G105
Software Win 8.1 Ultimate x64 | Win 8.1 Ultimate x64
Benchmark Scores 3D Mark - Fire Strike Extreme - 4403
That looks fine, I/O plates are cheaply made, that could cause them to be off aligned. Or even a slightly warped case, even the $100 - $200 cases have flex to them. Looks like you can plug in anything there just fine, so I wouldn't worry about it.
 
Joined
May 20, 2004
Messages
10,487 (1.45/day)
How is it because of the I/O plate? It's clearly straight, the motherboard is not. Are the spacers in your case of the same length? If they are, the screws should force it to align? If not, that's your problem :)
 
Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
Well before it didn't do that. Well I can barely use my 2 USB and PS2, it does seem to get better through time. Maybe if I let it like this, it will align by it self in a few days?

Humm I checked the Motherboard stand-off, they are quite short and they are all the same height. But I could use higher ones in the corners that aren't bend and smaller ones in the bend corners?
 
Last edited:

qamulek

New Member
Joined
Feb 7, 2008
Messages
184 (0.03/day)
After the thermal pastes burns in it is possible to loosen the screws holding the heatsink on without the heatsink falling off. I remember once taking off all the screws holding down the heatsink, and I had to forcibly pull the heatsink off.

Another thought may be that the backplate doesn't have enough clearance and the backplate is keeping the motherboard bent up after mounting. Maybe something else is stuck behind the motherboard? I don't know, these are just thoughts that come across my mind when I see that huge bend :eek:
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
Is there enough room behind your mobo for the backplate? It could be that the backplate is pushing up on the mobo.
 
Joined
Apr 23, 2006
Messages
3,558 (0.54/day)
Location
Enschede, The Netherlands
System Name Lian Li Carbon fiber ed.
Processor Intel i5 2500k 4.6Ghz 24/7 Max OC 5Ghz
Motherboard Asrock Z68 Extreme3 Gen3
Cooling Swiftech blocks, 360 Xflow rad, Swiftech 120 rad, Liang with XSPC res/pump top.
Memory 8Gb Mushkin 1600Mhz 8-9-8-24
Video Card(s) Sapphire HD6950 2Gb
Storage OCZ Vertex 4 128 / Western Digital 160
Display(s) ASUS 25,5" wide VW266h
Power Supply Corsair HX620 modular
Software Windows 7 64
Some cooler backplates do that.
I had it on my old Asus board. That board was also curved as hell.
Also my HD3870 that i equipped with a Thermalright V2 is now so bend that i had to loosen the screws a bit to get it in the slot.
 
Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
The Back Plate seems to fit in the back. guess I'll have to live with it...
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
The Back Plate seems to fit in the back. guess I'll have to live with it...

Its definetly not touching the chassis? And pushing up on the mobo? Does your mobo look bent or is it just not lining up with the I/O?
 
Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
Well the rest of the I/O is aligned, only the top ports near the socket. I'll try to remove every thing to check to be 100% sure. I'll report back later.
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.43/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
overclock the backplate so you board won't be bent as much
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.08/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
That looks fine, I/O plates are cheaply made, that could cause them to be off aligned. Or even a slightly warped case, even the $100 - $200 cases have flex to them. Looks like you can plug in anything there just fine, so I wouldn't worry about it.

LOL WHAT ?? you mean you can't see that the mobo is bent , the back plate is fine well seated and every thing .

This is what I would do . I would take the HSF and back plate off turn the back plate around , In other words take the hole and or peg that is the nearest to the I/O ports and placing it in the hole near the ram chips this should solve the problem also make sure that you are giving even pressure to each screw as you reinstall the HSF .
I hope this works . Also there might be some thing that is affecting the worpage and back plate on the mobo it's self so check the mobo and every thing and see how it sits on the mobo and if there is any thing in the way at all solder or transistor or any thing .
 
Joined
Nov 14, 2007
Messages
1,773 (0.30/day)
Location
Detroit, MI
Processor AMD Ryzen 7 5800X3D
Motherboard ASUS TUF Gaming X570-Pro Wifi II
Cooling Hyper 212 EVO v2
Memory 2x16GB G.Skill DDR4-4000
Video Card(s) AMD RX 6750 XT
Storage WD Black SN850 2TB, various other SSD's from ages past
Display(s) LG 27GL850 1440@144, AG Neovo EM2701QC 1440@75
Case Zophos EVO Silent by Raijintek
Audio Device(s) HyperX Cloud II Wireless headphones
Power Supply Corsair RM850x
Mouse ProtoArc EM01
Keyboard Razer Blackwidow X Chroma Mercury
Software Windows 11 Pro
overclock the backplate so you board won't be bent as much

Hmm... You're gonna have to write a guide of backplate OC'ing hat. I can't recall ever seeing one :roll:
 
Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
Okay the Motherboard is definitely bent. I tried with the low weight Stock Cooler and the ports still don't align. Any thoughts about running a PC without the I/O Shield Plate? Dust? Risk? :confused:

Or could I put it back straight by screwing the mobo in the case without a cooler and letting it adjust through time?
 

qamulek

New Member
Joined
Feb 7, 2008
Messages
184 (0.03/day)
Okay the Motherboard is definitely bent. I tried with the low weight Stock Cooler and the ports still don't align. Any thoughts about running a PC without the I/O Shield Plate? Dust? Risk? :confused:

Or could I put it back straight by screwing the mobo in the case without a cooler and letting it adjust through time?

Does the stock cooler mount with pushpins? If you still have to use screws to mount the cooler then I'd still take a guess that its to much torque on the screws, but if not then my next guess(before blaming a truely bent mobo) would be that something is catching on the motherboard right where it meets the I/O plate. Even if the motherboard is slightly bent I would think that the screw that holds the mobo to the case would be enough to force the mobo to straighten out, which is why I'm thinking something is catching on the mobo.

Maybe one of the gold(colored) spacers isn't fully screwed in? I don't know just more guesses since I really would hate to blame a bent motherboard on that huge bend.

In any case if you don't figure it out then there really isn't much to worry about running the pc without an I/O shield, just be careful when plugging stuff in so you don't accidently short the mobo with a piece of metal. I ran my last pc without an I/O shield, and the worse that happened was dust building up around the ports since it was like an air exhaust without the shield. I'm going to guess there are technical reasons for the I/O shield, such as maybe EMI shielding, but I don't worry about it that much especially since I'm running my current pc with no side panel :roll:
 

CDdude55

Crazy 4 TPU!!!
Joined
Jul 12, 2007
Messages
8,178 (1.34/day)
Location
Virginia
System Name CDdude's Rig!
Processor AMD Athlon II X4 620
Motherboard Gigabyte GA-990FXA-UD3
Cooling Corsair H70
Memory 8GB Corsair Vengence @1600mhz
Video Card(s) XFX HD 6970 2GB
Storage OCZ Agility 3 60GB SSD/WD Velociraptor 300GB
Display(s) ASUS VH232H 23" 1920x1080
Case Cooler Master CM690 (w/ side window)
Audio Device(s) Onboard (It sounds fine)
Power Supply Corsair 850TX
Software Windows 7 Home Premium 64bit SP1
My 680i is a bit off alignment, but the connections are still there, so its no biggy to me.:)
 
Joined
Jan 22, 2009
Messages
200 (0.04/day)
Location
Switzerland
Processor Intel i5 12600K
Motherboard ASUS TUF GAMING Z690-PLUS WIFI D4
Cooling Noctua NH-U14S
Memory Crucial Ballistix DDR4 2x8GB 3600Mhz
Video Card(s) ASUS TUF RTX 3070Ti
Storage Samsung 980 PRO 1TB
Display(s) Dell S2721DGF
Case Phantek P600S/ Corsair ML140 Pro
Power Supply Seasonic Prime PX 750W
Mouse Razer Deathadder V2 Mini
Keyboard Razer Huntsman
Software Windows 11 x64
I FIXED it! :)

I used some spare Lian-Li Motherboard stand-offs, don't know why but not the ports are all aligned. Mysterys of Hardware... :rolleyes:
 

CDdude55

Crazy 4 TPU!!!
Joined
Jul 12, 2007
Messages
8,178 (1.34/day)
Location
Virginia
System Name CDdude's Rig!
Processor AMD Athlon II X4 620
Motherboard Gigabyte GA-990FXA-UD3
Cooling Corsair H70
Memory 8GB Corsair Vengence @1600mhz
Video Card(s) XFX HD 6970 2GB
Storage OCZ Agility 3 60GB SSD/WD Velociraptor 300GB
Display(s) ASUS VH232H 23" 1920x1080
Case Cooler Master CM690 (w/ side window)
Audio Device(s) Onboard (It sounds fine)
Power Supply Corsair 850TX
Software Windows 7 Home Premium 64bit SP1
I FIXED it! :)

I used some spare Lian-Li Motherboard stand-offs, don't know why but not the ports are all aligned. Mysterys of Hardware... :rolleyes:

Its weird, my CM690 case came with both long and short standoffs, making it annoying trying to compare sizes to make sure all the ones i use where the same length.
 
Top