• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

More Woes

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
Randomly after updating my Bios I started having problems when I overclock my graphics card
it says overclock faild and I have to go in and reset:( here's the settings


 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Change Internal Graphics Mode Select to "Disabled". I notice your RAM voltage is set to AUTO, you may need to change that. What is your RAM's stock speed, voltage and timings?
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(

K I'll try turning off the internal GFX
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(

New settings=better pi calculation...

Do you think I can take it further?
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
crikey mate have you still got the stock cooler like your specs indicate?
Them volts are pretty high!
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
yep... but the only thing that I'm confused is which software to believe!!
 
Joined
Dec 29, 2008
Messages
696 (0.12/day)
Location
Elkhart, IN
I think that's the default voltage for your proc. Go under the "Sensor" tab thingy in Everest, that will show you your actual voltages and temps.
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
+1
Voltage is a little too high for a stock cooler, but check your temps @ load.

Try this lil' utility another member just reccommended to me. It'll check your overclock.

http://www.mediafire.com/?lezdm9wzxog
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
thanx ppl...
now I have another problem... I try to take the multiplier to 11 and it wont boot, why is that so?
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(

still the same voltage shown...:confused:
any other software that I can use to check? the Temps are fine I think...
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
thanx ppl...
now I have another problem... I try to take the multiplier to 11 and it wont boot, why is that so?

It won't boot because when u put the multi upto 11 you push the cpu speed upto 3.3Ghz and there ain't enough volts for it. I would be happy at 3ghz on a stock cooler. just check stability

Get speedfan - look at your temps and volts in there. Put some load on the CPU and see what the Vcore goes down to.
 
Joined
Dec 29, 2008
Messages
696 (0.12/day)
Location
Elkhart, IN
thanx ppl...
now I have another problem... I try to take the multiplier to 11 and it wont boot, why is that so?

Well it could be that when you changed the multi, the DRAM to FSB ratio changed so your ram could be running at an even higher speed. I could be wrong though as I am not familiar with Intel procs/systems.

http://img.techpowerup.org/090322/more huh.jpg
still the same voltage shown...:confused:
any other software that I can use to check? the Temps are fine I think...

What does it say in the bios? That would be the most accurate. Try Core Temp for monitoring your temps and voltages.
 
Joined
Jan 21, 2009
Messages
734 (0.13/day)
Location
Golden, Colorado
System Name KAREN / EVA / GHOST
Processor Intel Core i7-950 / AMD Phenom II X4 940 BE / Core i5 3570k
Motherboard ASUS TUF Sabertooth X58 / DFI LP DK 790FXB-M2RSH / Asrock z77e-itx
Cooling Thermaltake Frio / Corsair Cooling™ Hydro Series H50 / Corsair Hydro Series H60
Memory Corsair Dominator 6GB DDR3 1600 / Corsair Dominator Quad2X4096-8500C5DF / G.SKILL Ripjaws Serie 1600
Video Card(s) XFX HD6950 CF unlocked /XFX HD5770 CF/ MSI R4890 Cyclone
Storage OCZ Vertex 2 60 WD Raptor X WD1500AHFD / Seagate Barracuda /Western Digital 80gb, Toshiba 1TB
Display(s) 2 Acer P215H 21.5 Widescreen / Acer S211HL 21.5 / HP 2009F 20inch
Case SILVERSTONE RAVEN RV02-BW / NZXT Phantom /Bitfenix Prodigy
Audio Device(s) On board / Philips MMS 321 - PC multimedia speakers
Power Supply Ultra X3 ULT40311 1000W / Cosair CMPSU-750TX 750W/ CORSAIR Gaming Series GS700 700W
Software Windows 7 64 bit / Windows 7 64 bit / Windows 7 64 bit

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
It won't boot because when u put the multi upto 11 you push the cpu speed upto 3.3Ghz and there ain't enough volts for it. I would be happy at 3ghz on a stock cooler. just check stability

Get speedfan - look at your temps and volts in there. Put some load on the CPU and see what the Vcore goes down to.

I've been trying to use speedfan, but it never works on my pc:(
but one thing that I'm happy about my pc is that it never reaches 70 degrees!:D
cos I have 10 fans in my case!
so how far do you think I have to up the voltage to make it boot?
 
Last edited:

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
darn! I cant restart or use standby in the new settings!! going back to the old ones for now...
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
Try it at 333x10, 1000mhz ram, 1.45v Vcore. if it doesn;t boot but the vcore up to 1.5 but get Realtemp to watch those temps!
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
cant unlink ram!! 10x333 doesn't work!! :suicide:
 
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
cant unlink ram!! 10x333 doesn't work!! :suicide:

Yes you can. Take the fsb upto 333 then press enter on the Dram Freq, i bet you see an option for 1000mhz
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
K I'll try...
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.60/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
Joined
Nov 1, 2008
Messages
4,213 (0.75/day)
Location
Vietnam
System Name Gaming System / HTPC-Server
Processor i7 8700K (@4.8 Ghz All-Core) / R7 5900X
Motherboard Z370 Aorus Ultra Gaming / MSI B450 Mortar Max
Cooling CM ML360 / CM ML240L
Memory 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz
Video Card(s) Zotac 3080 / Colorful 1060
Storage 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe
Display(s) LG 27GN800-B 27'' 2K 144Hz / Sony TV
Case Xigmatek Aquarius Plus / Corsair Air 240
Audio Device(s) On Board Realtek
Power Supply Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum
Mouse Logitech G502 Hero / K400+
Keyboard Wooting Two / K400+
Software Windows 10 x64
Benchmark Scores Cinebench R15 = 1542 3D Mark Timespy = 9758
k keep it at 880 and move up from there. If you can get 3.33Ghz out of the chip you can;t really ask for more. 880mem vs 1000mhz memory is insignificant really
 
Top