MKmods
Case Mod Guru
- Joined
- Feb 26, 2008
- Messages
- 5,697 (0.97/day)
- Location
- Nevada
System Name | Crossflow III |
---|---|
Processor | AMD 965 (4.04Ghz) |
Motherboard | Asus Crosshair III |
Cooling | Air |
Memory | 4 gigs Mushkin 7-7-7-20@1T |
Video Card(s) | single 9800GT |
Storage | Raptor 150's in Raid0 |
Display(s) | LG Flatron 24" |
Case | Custom |
Audio Device(s) | AuzenTech X-Raider W/OP637 |
Power Supply | Custom modded Corsair 750HX |
Software | Win 7 64/Solaris Utility |
Benchmark Scores | 3DMark06--21963 so far |
the box isant the prob (its the parts inside them) The parts get hot and make no contact with the box so heat cant be transferred (like a CPU does when a heatsink is attached to it)
This is the only way air can enter or escape the box
But remove the top and air can circulate quite a bit better
But care needs to be given not to short out any of the contacts..
This is the only way air can enter or escape the box
But remove the top and air can circulate quite a bit better
But care needs to be given not to short out any of the contacts..