• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

AMD Indexed Overclock Speeds

Joined
Feb 22, 2006
Messages
110 (0.02/day)
Location
Australia
System Name Black Beauty
Processor 4790K
Motherboard MSI Gaming 3
Cooling Water H110
Memory Corsair Vengeance Pro 1866C9B 16GB
Video Card(s) ASUS Strix GTX970
Storage Samsung SSD 850 Pro
Display(s) BENQ 24"
Case Corsair Obsidian 450D
Audio Device(s) Onboard
Power Supply Corsair HX750i
Mouse R.A.T.7
Keyboard Corsair Vengeance K95
Software W7 Pro 64bit
Dude...impressive numbers. My Denmark Opty topped out at 2700 or so stable. 'Course, you're running water, and I'm on air, but still.

I'm curious. My temps were still running very cool, but I went unstable, locking, restart, etc. What's the likely culprit for something like that if it's not obviously overheating?
Cheers :). Could be your chipset - not enough volts, or could be your memory. What vcore are you running for that frequency?
Could also be the fact you are running 4 sticks of memory?
 
Last edited:

Ahhzz

Moderator
Staff member
Joined
Feb 27, 2008
Messages
8,708 (1.48/day)
System Name OrangeHaze / Silence
Processor i7-13700KF / i5-10400 /
Motherboard ROG STRIX Z690-E / MSI Z490 A-Pro Motherboard
Cooling Corsair H75 / TT ToughAir 510
Memory 64Gb GSkill Trident Z5 / 32GB Team Dark Za 3600
Video Card(s) Palit GeForce RTX 2070 / Sapphire R9 290 Vapor-X 4Gb
Storage Hynix Plat P41 2Tb\Samsung MZVL21 1Tb / Samsung 980 Pro 1Tb
Display(s) 22" Dell Wide/24" Asus
Case Lian Li PC-101 ATX custom mod / Antec Lanboy Air Black & Blue
Audio Device(s) SB Audigy 7.1
Power Supply Corsair Enthusiast TX750
Mouse Logitech G502 Lightspeed Wireless / Logitech G502 Proteus Spectrum
Keyboard K68 RGB — CHERRY® MX Red
Software Win10 Pro \ RIP:Win 7 Ult 64 bit
Thanks for the reply ;) Running ... 1.334v, I believe ;) here's my data. I just put the four sticks in last month, so those numbers are before, and I was running 2 sticks of Mushkin at the time... and at some point there, was actually running 2 Kingston Values...
 
Joined
Feb 22, 2006
Messages
110 (0.02/day)
Location
Australia
System Name Black Beauty
Processor 4790K
Motherboard MSI Gaming 3
Cooling Water H110
Memory Corsair Vengeance Pro 1866C9B 16GB
Video Card(s) ASUS Strix GTX970
Storage Samsung SSD 850 Pro
Display(s) BENQ 24"
Case Corsair Obsidian 450D
Audio Device(s) Onboard
Power Supply Corsair HX750i
Mouse R.A.T.7
Keyboard Corsair Vengeance K95
Software W7 Pro 64bit
If that is all you are putting into the cpu, I would say you have a bit more to go, provided you can keep it cool.
My 165 can run 2800 with stock vcore, then 1.475 vcore to get to 3150. I reckon I could get it up even higher if I pump 1.6 into her, but I have taken the water cooling off now and put it on my Phenom II :).
If you can cool it, try 1.45vcore and see what you can get. Drop your memory and HT multi's accordingly.
 
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
Got bored so one last time pushed my retired X2 5600 F3 Windsor (yup woke her up once again). Here are the numbers.

HTT Speed - 1032.2
Multiplier - 14
Memory type and speed - Kingston ValueRam DDR2 800 @ DDR2 1032 (This kingston is really awesome :rockout:)
FSB - 258
CPU Voltage - 1.48 (unusually higher this time)
Motherboard Type/Brand - Asus M4A78 Pro (earlier it was Biostar TF8200A)
CPU Type - X2 5600 Windsor F3, 2 x 1MB Cache
Memory timings - 6-6-6-18-2T

http://valid.canardpc.com/show_oc.php?id=648738


 

Attachments

  • X25600_Asus_M4A78pro_258x14.JPG
    X25600_Asus_M4A78pro_258x14.JPG
    164.9 KB · Views: 381

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
nice clocking... you still not willing to give up that chip?
 
Joined
Nov 27, 2007
Messages
2,255 (0.38/day)
System Name HOMECOMPUTER
Processor Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard Asux ROG Maximus XI Hero Wifi
Cooling ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory 16GB DDR 3600 Trident Z RGB
Video Card(s) Gigabyte RTX 2080TI
Storage 1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s) 2 Dell Gaming 27" 1440P Gsync
Case Lian LI PC-011 Dynamic
Audio Device(s) onboard
Power Supply Evga P2 1200Watt
Mouse Zowie FK1+
Keyboard Corsair Strafe rgb silent
Software Windows 10 Pro
Benchmark Scores i'm working on that
i had a 5000be that hit that high, amazing chips for the cripple architecture imho. Good work man.
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
i had a 5000be that hit that high, amazing chips for the cripple architecture imho. Good work man.

how much voltage? and what you mean cripple architecture? how is it crippled?
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,731 (3.43/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
HTT Speed: 1750
Multiplier: 12
Memory type and speed: Geil Black Dragon DDR2 800 @ DDR 1000
FSB: 250
CPU Voltage: 1.3 in BIOS
Motherboard Type/Brand: BIOSTAR TF720 A2+
CPU Type: Athlon64 x2 7750BE (Kuma)
Memory timings 5-5-5-15
Cooling: Arctic Freezer 64 Pro

Will add cpu-z screenshots soon.
 
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
nice clocking... you still not willing to give up that chip?

yup, real hard to give up my Favorite chip upto date. I might just sell it in few days kissing it bye and move on to new stuff :cry:

but that thing sucks up power when you load it up at that speed and voltage probably around 200+W :laugh:
 
Joined
Oct 1, 2006
Messages
4,883 (0.76/day)
Location
Hong Kong
Processor Core i7-12700k
Motherboard Z690 Aero G D4
Cooling Custom loop water, 3x 420 Rad
Video Card(s) RX 7900 XTX Phantom Gaming
Storage Plextor M10P 2TB
Display(s) InnoCN 27M2V
Case Thermaltake Level 20 XT
Audio Device(s) Soundblaster AE-5 Plus
Power Supply FSP Aurum PT 1200W
Software Windows 11 Pro 64-bit
Looks like its time for some Deneb and Regor OCs.
No good having just K8 and Phneom I around. :p

Edit: Here you go :D
 
Last edited:
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
yup, real hard to give up my Favorite chip upto date. I might just sell it in few days kissing it bye and move on to new stuff :cry:

but that thing sucks up power when you load it up at that speed and voltage probably around 200+W :laugh:

is it stable at that speed? Also Pm me before you put it for sale if i have the money i will take it
 
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
is it stable at that speed? Also Pm me before you put it for sale if i have the money i will take it

not 100% stable needs more voltage and the new Asus board I am goofing with doesn't have enough voltage settings and AOD also doesn't allow more than 1.5v total.
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
not 100% stable needs more voltage and the new Asus board I am goofing with doesn't have enough voltage settings and AOD also doesn't allow more than 1.5v total.

thanks :toast: whats the highest stable you can get and with what voltage?
 
Joined
Oct 1, 2006
Messages
4,883 (0.76/day)
Location
Hong Kong
Processor Core i7-12700k
Motherboard Z690 Aero G D4
Cooling Custom loop water, 3x 420 Rad
Video Card(s) RX 7900 XTX Phantom Gaming
Storage Plextor M10P 2TB
Display(s) InnoCN 27M2V
Case Thermaltake Level 20 XT
Audio Device(s) Soundblaster AE-5 Plus
Power Supply FSP Aurum PT 1200W
Software Windows 11 Pro 64-bit
nice OC there. but not enough. get up to 4Ghz :D
Well, not as great idea in on air.
Last week in Hong Kong, it was 30C and 98% Humitity at mid-night. :respect:
 
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
thanks :toast: whats the highest stable you can get and with what voltage?

Max was 3.5Ghz easy, voltage differs on different boards
On Abit AN52 and Biostar TF8200A it took only 1.38v to be rock solid stable. But this Asus board needs 1.45v to stabilize, may be this is a low end board.
 
Joined
Nov 27, 2007
Messages
2,255 (0.38/day)
System Name HOMECOMPUTER
Processor Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard Asux ROG Maximus XI Hero Wifi
Cooling ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory 16GB DDR 3600 Trident Z RGB
Video Card(s) Gigabyte RTX 2080TI
Storage 1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s) 2 Dell Gaming 27" 1440P Gsync
Case Lian LI PC-011 Dynamic
Audio Device(s) onboard
Power Supply Evga P2 1200Watt
Mouse Zowie FK1+
Keyboard Corsair Strafe rgb silent
Software Windows 10 Pro
Benchmark Scores i'm working on that
how much voltage? and what you mean cripple architecture? how is it crippled?

i only feel the a64 5000 and all processors in that series were crippled, temp sensors sucked, well they suck now too, much slower then the conroe proccy's. as far as voltage would hit 3.6 at 1.535.

you may feel differently about my statement, i only mean that phenom2 days are much better then my days with my 5000 be days. i had fun with that proccy, i'm just sayin the phenom 2 series are a lot better

and my phenom 2 oc's a hell of a lot better, here's my newest 12 hour stable

 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
i only feel the a64 5000 and all processors in that series were crippled, temp sensors sucked, well they suck now too, much slower then the conroe proccy's. as far as voltage would hit 3.6 at 1.535.

you may feel differently about my statement, i only mean that phenom2 days are much better then my days with my 5000 be days. i had fun with that proccy, i'm just sayin the phenom 2 series are a lot better

and my phenom 2 oc's a hell of a lot better, here's my newest 12 hour stable

http://img.techpowerup.org/090814/Capture.jpg

i do agree with most of that. Temp Sensors did suck it was vary rare that you got a chip that they worked.The A64 did get its ass handed to it in mostly everything. I think AMDs best move for the a64 was the Black edition.The 65nm was slower then the 90nm :wtf: come on amd what the fuck are you thinking SOME of the 65nm did clock better then the 90nm (G2 and F3) the F3 almost always beat the G2 when it came to overclocking.(90nm clocking better then 65nm:shadedshu) :laugh: well come to think about it i agree with everything you said. Sorry for going on so long about it. The PII is alot better clock for clock and overclocking... Nice clock you got on that chip. But doesn't high voltage kill the 45nm fast?
 
Joined
Nov 27, 2007
Messages
2,255 (0.38/day)
System Name HOMECOMPUTER
Processor Intel i9 - 9900k @ 5.1Ghz - 1.31v
Motherboard Asux ROG Maximus XI Hero Wifi
Cooling ek supremacy evo full nickle, 2xEK 360 Radiators, ek d5 pump/res combo, ek full cover 2080ti block
Memory 16GB DDR 3600 Trident Z RGB
Video Card(s) Gigabyte RTX 2080TI
Storage 1xWD black NVME 500GB, 1xSamsung 970 Evo Plus NVME 1TB
Display(s) 2 Dell Gaming 27" 1440P Gsync
Case Lian LI PC-011 Dynamic
Audio Device(s) onboard
Power Supply Evga P2 1200Watt
Mouse Zowie FK1+
Keyboard Corsair Strafe rgb silent
Software Windows 10 Pro
Benchmark Scores i'm working on that
@ pos Not really, from my research heat is really the most important thing, these chips seem to love cool temps, under water with the ac on i idle around 30-32c and load i get about 47. People have been saying stay away from 1.6 and go no higher then about 1.55, the actualy bios set voltage is 1.535 and when it's under load it hits about 1.55 due to the board. Temps are great imho and the performance is incredible. I'm happy with it thus far.
 
Joined
Apr 5, 2005
Messages
6,770 (0.98/day)
Location
Republic of Asia (a.k.a Irvine), CA
System Name ---
Processor FX 8350 @ 4.00 Ghz with 1.28v
Motherboard Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s) Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s) 3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case AeroCool XPredator X3
Audio Device(s) Built-in Realtek
Power Supply Corsair HX1000 Modular
Software Windows 10 Pro 64 bit
@ pos Not really, from my research heat is really the most important thing, these chips seem to love cool temps, under water with the ac on i idle around 30-32c and load i get about 47. People have been saying stay away from 1.6 and go no higher then about 1.55, the actualy bios set voltage is 1.535 and when it's under load it hits about 1.55 due to the board. Temps are great imho and the performance is incredible. I'm happy with it thus far.

with a xiggy weapon in hand heat is not a problem with F3 windsor. low 20's in winter to low to mid 30's in summer idle and never went over 45C load and will beat the crap out of any brissy.
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
Heres some of my max clock on my old 5400B.E.


I clocked this 9950 to 3.47GHZ, but I cant find the screenie. But here it is at 3.256GHZ
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
3d 35mhz higher on the 5400 then i got on my 4850e.
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
3d 35mhz higher on the 5400 then i got on my 4850e.

and ALOT higher on the 8800GT then i got on mine (mine 830/2080/1114) what voltage you run on that thing? did you do the OCP mod?
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
3d 35mhz higher on the 5400 then i got on my 4850e.

Thats a nice 4850e:toast:
What held me back was the fact my board wouldnt let me go above 1.5 with voltage. Otherwise I think 3.6GHZ wouldve been possible:rockout:
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
and ALOT higher on the 8800GT then i got on mine (mine 830/2080/1114) what voltage you run on that thing? did you do the OCP mod?


:laugh: I think I was pumping 1.4V thru it, and yes I did the OCP mod. It really does let you squeeze out some more MHZ's.
I V-Modded the Ram also but It was pointless IMO.
Shit either way you got that Card clocked screaming fast:cool:
 
Top