• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

can any one with a crosshair ii formula help me with bios settings?

Joined
Jul 22, 2008
Messages
1,183 (0.21/day)
Location
Huntington Beach CA
System Name ROG MACHINE
Processor Ryzen 9 5950x
Motherboard Crosshair viii Hero
Cooling NZXT Kraken Z 73 my corsair H115i kicked the bucket corsair sucks lol
Memory g-skill rgb 64gb 4x16gb ddr4 3200mgz
Video Card(s) MSI Ventus 3x oc 3080
Storage Sabren rocket gen 4 2tb m.2/ samsung 960 evo 1tb m.2/ 3x toshiba 3tb hdd , 10tb seagate, 16tb seagat
Display(s) Acer 4k monitor/ Samsung C34J79x 34 inch curved monitor
Case thermal take view 71 rgb
Audio Device(s) creative ae-5 sound card
Power Supply corsair AX 1200i 1200 watt psu
Mouse ROG CHAKRAM
Keyboard corsair k95
Software windows 11 pro 64bit
if you have a crosshair ii can you tell me what to set the cpu-nb multiplier at and ather settings? you see my hyper tranceport clock and my north bridge clock is at 1800 is that low for my setup? i just want to tweek my system a little i don't want to go crazy with over clocking.my bios is ver 2003. thanks for any help:)
 
Joined
Jul 20, 2009
Messages
284 (0.05/day)
Location
Wales, Uk
Processor AMD PHENOM 9950BE x4 (140W)
Motherboard ASUS CROSSHAIR II (BIOS 2003)
Cooling ZALMAN 9700L
Memory 4GB CORSAIR DOMINATOR 1066 (2x2GB)
Video Card(s) XFX 9600GT XXX (740/1000)
Storage WD250x2 RAID0/Maxtor 500GB STORAGE
Display(s) SAMSUNG 23"/ACER 20"
Case COOLMASTER 690 CUSTOM
Audio Device(s) SUPREME FX II
Power Supply OCZ 700W
Software WINDOWS 7 64
Mine is set at 10x 200FBS, giving me a 2000HT, but lowering it should be no problem. Hope i understood you right there.

CPU Freq = 200
CPU Multi = 15X
K8 NB HT Speed = 2G
K8 NB HT Width = 16 16
PCI-E = 100
CPU-NB Multi = 10X
Vcore = 1.3650v

Those NF200's get crazy hot, so make sure you have decent cooling on the NB, though i have a 140W phenom in my system so your 940 should help out with heat at least,
 
Last edited:
Joined
Nov 9, 2008
Messages
2,318 (0.41/day)
Location
Texas
System Name Mr. Reliable
Processor Ryzen R9 5950x
Motherboard MSI Meg X570s Ace Max
Cooling D5 Pump, Singularity Top/Res, 2x360mm EK P rads, EK Magnitude/Alphacool Blocks
Memory 32Gb (4x8Gb) Corsair Dominator Platinum 3600Mhz @ 16/19/20/36 1.35v
Video Card(s) MSI 3080ti with Alphacool Block
Storage 2 x Corsair Force MP400 1TB Nvme; 2 x T-Force Cardea Z340; 2 x Mushkin Reactor 1TB
Display(s) Acer 32" Z321QU 2560x1440; LG 34GP83A-B 34" 3440x1440
Case Lian Li PC-011 Dynamic XL; Synology DS218j w/ 2 x 2TB WD Red
Audio Device(s) SteelSeries Arctis Pro+
Power Supply EVGA SuperNova 850G3
Mouse Razer Basilisk V2
Keyboard Das Keyboard 6; Razer Orbweaver Chroma
Software Windows 10 Pro
I do not have a Crosshair II, but I do have a PII 940...the 940 has a default HT speed of 1800...but my DFI 790FX has a bios adjustment to set it to run at 2000Mhz, just remember that the HT can NEVER be set higher than the NB...i.e NB = 200x10, HT cannot be higher than 2000Mhz, NB=220x10, HT cannot be higher than 2200Mhz...You crosshair should have the same settings...Good Luck..:toast:

Edit: Using meows stats above the setting I am referring to is K8 NB HT Speed...BTW, clock the hell out of that 940...it is a great chip...Mine does 3.7 @ 1.45 volts 24/7...:D
 
Joined
Mar 27, 2007
Messages
809 (0.13/day)
Location
Tampa FL
Processor AMD Ryzen 3800x
Motherboard Asus TUF Gaming X-570-Plus (WiFi)
Cooling Corsair Hydro Series H110i
Memory 32 GB Corsair Dominator RGB DDR4 3200 Mhz @3600
Video Card(s) Asus AREZ RX Vega 64 Strix OC 8GB
Storage Samsung 970 EVO Plus 1 TB
Display(s) Asus PB258Q 25" 2560x1440
Case Cooler Master Master Case 5 Pro
Power Supply Corsair RMx 1000
Software Windows 10 Pro 64
best bet is to just leave it on "auto" so it runs at the default for the cpu
 
Joined
Jul 22, 2008
Messages
1,183 (0.21/day)
Location
Huntington Beach CA
System Name ROG MACHINE
Processor Ryzen 9 5950x
Motherboard Crosshair viii Hero
Cooling NZXT Kraken Z 73 my corsair H115i kicked the bucket corsair sucks lol
Memory g-skill rgb 64gb 4x16gb ddr4 3200mgz
Video Card(s) MSI Ventus 3x oc 3080
Storage Sabren rocket gen 4 2tb m.2/ samsung 960 evo 1tb m.2/ 3x toshiba 3tb hdd , 10tb seagate, 16tb seagat
Display(s) Acer 4k monitor/ Samsung C34J79x 34 inch curved monitor
Case thermal take view 71 rgb
Audio Device(s) creative ae-5 sound card
Power Supply corsair AX 1200i 1200 watt psu
Mouse ROG CHAKRAM
Keyboard corsair k95
Software windows 11 pro 64bit
best bet is to just leave it on "auto" so it runs at the default for the cpu

ya i think ill keep it at auto i dont want the nf200 chip to get to hot it will last longer that way.
 
Joined
Jul 22, 2008
Messages
1,183 (0.21/day)
Location
Huntington Beach CA
System Name ROG MACHINE
Processor Ryzen 9 5950x
Motherboard Crosshair viii Hero
Cooling NZXT Kraken Z 73 my corsair H115i kicked the bucket corsair sucks lol
Memory g-skill rgb 64gb 4x16gb ddr4 3200mgz
Video Card(s) MSI Ventus 3x oc 3080
Storage Sabren rocket gen 4 2tb m.2/ samsung 960 evo 1tb m.2/ 3x toshiba 3tb hdd , 10tb seagate, 16tb seagat
Display(s) Acer 4k monitor/ Samsung C34J79x 34 inch curved monitor
Case thermal take view 71 rgb
Audio Device(s) creative ae-5 sound card
Power Supply corsair AX 1200i 1200 watt psu
Mouse ROG CHAKRAM
Keyboard corsair k95
Software windows 11 pro 64bit
Mine is set at 10x 200FBS, giving me a 2000HT, but lowering it should be no problem. Hope i understood you right there.

CPU Freq = 200
CPU Multi = 15X
K8 NB HT Speed = 2G
K8 NB HT Width = 16 16
PCI-E = 100
CPU-NB Multi = 10X
Vcore = 1.3650v

Those NF200's get crazy hot, so make sure you have decent cooling on the NB, though i have a 140W phenom in my system so your 940 should help out with heat at least,

well i got brave and i try your setting the nb went up to 2000 but the ht stayed at 1800 do you know how to get that up to 2000?
 
Top