- Joined
- Jun 2, 2007
- Messages
- 5,106 (0.83/day)
- Location
- Kansas
Processor | Core i5 3570K |
---|---|
Motherboard | AsRock z77 Pro4 |
Cooling | Zalman CNPS10X Extreme |
Memory | 2x4GB GSkill Sniper |
Video Card(s) | MSI GTX970 Gaming |
Storage | 240GB OCZ ARC 100, Samsung Spinpoint F3 1TB |
Display(s) | LG 23" 1920x1080 |
Case | Antec P100 |
Audio Device(s) | Onboard |
Power Supply | Antec Edge 750W |
Software | Windows 8.1 Pro 64 |
So my son was outside playing the other day, and was goofing around under our deck. He pulled out some scrap wood that has been sitting down there since who knows when. I took a look at a few of the pieces and wondered, "could I build a tech station out of that instead of putting out mucho dinero for a prebuilt one?" The answer will probably be no since I can count on one hand the stuff I've built from scratch in my life, but dammit I'm going to give it an effort. I also have an old beige case I may harvest parts from.
This log will welcome any and all ideas from the community as I'm diving in blind and have minimal idea what I'm doing. Here's the pictures of the starting parts; The big piece of wood is 2'x3' roughly and the little one I think I'll be cutting the legs from.
This log will welcome any and all ideas from the community as I'm diving in blind and have minimal idea what I'm doing. Here's the pictures of the starting parts; The big piece of wood is 2'x3' roughly and the little one I think I'll be cutting the legs from.
Last edited: