TPU's WCG/BOINC Team

p_o_s_pc · Oct 25, 2009

@velevet edit your post please no talk of illegal software

Mindweaver · Oct 25, 2009

Velvet Wafer said:
fuck^^ i need some 64 bit windows too
i only have professional 32 bit
man, why is windows 7 so expensive
even an xp64 isnt affordable...:shadedshu

I just checked Pricewatch.com and found this http://www.9software.com/Microsoft_Windows_XP_Pro_p/msppwinxp64nfr.htm&Click=5673 It's got free shipping!

Velvet Wafer · Oct 25, 2009

p_o_s_pc said:
@velevet edit your post please no talk of illegal software

very sad that such talk is forbidden here

Herr Mindweaver, haben sie auch etwas auf Deutsch?^^

Mindweaver · Oct 25, 2009

Lange Nacht des Trinkens! Traurig kein mein Freund! :banghead:

Velvet Wafer · Oct 25, 2009

Schon wieder? Haben sie zu sehr dem Schnaps zugesprochen?

Mindweaver · Oct 25, 2009

Nein UPS Wasser! hehehe

p_o_s_pc · Oct 25, 2009

how long of linpack should i run before i consider it stable and start crunching again?

btw cheap TIM is better then no TIM. Before load was 64c without any with it 57c max on linpack

[Ion] · Oct 25, 2009

p_o_s_pc said:
how long of linpack should i run before i consider it stable and start crunching again?

I would say 2 hours, but less would probably be fine (maybe an hour). LinPack is far more stressful than P95, which I usually let run for 8-12 hours

Mindweaver · Oct 25, 2009

Ja.. Menge harten Alkohols... hehehe

p_o_s_pc · Oct 25, 2009

[Ion] said:
I would say 2 hours, but less would probably be fine (maybe an hour). LinPack is far more stressful than P95, which I usually let run for 8-12 hours

most of the time i let it go for about ~1hr sometimes more then run wprime super PI 3dmark furmark. (i know some of them stress Gpu more then CPU) just to make sure everything is stable. I think i will let it run 1hr then run orthos for 30mins just so it gets tested under different stress levels

Velvet Wafer · Oct 25, 2009

p_o_s_pc said:
how long of linpack should i run before i consider it stable and start crunching again?

btw cheap TIM is better then no TIM. Before load was 64c without any with it 57c max on linpack

you could have used motor oil :laugh:

run it 1-2 hours with 1-2 memtests, allocate the most memory to the memtests,they find memory errors far better than linpak,so its more useful when stressing the gpu (low amount of memory)

was für welchen denn Herr Mindweaver?^^

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
you could have used motor oil

run it 1-2 hours with 1-2 memtests, allocate the most memory to the memtests,they find memory errors far better than linpak,so its more useful when stressing the gpu (low amount of memory)

was für welchen denn Herr Mindweaver?^^

not overclocking the ram at all its underclocked so that won't be a problem area

Mindweaver · Oct 25, 2009

Crown Royal.. hehehe

Velvet Wafer · Oct 25, 2009

p_o_s_pc said:
not overclocking the ram at all its underclocked so that won't be a problem area

so run it with low memory either ;-) stresses cpu more

EDIT:

i love whiskey too^^

my test just completed,have a look ;-)

p_o_s_pc · Oct 25, 2009

here is my final overclock.I think i could do better but i stop at 3ghz on these chips

Velvet Wafer · Oct 25, 2009

naw come on!^^ give him one more, i hate uncomplete clocks :laugh:

where did your patriots went?

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
naw come on!^^ give him one more, i hate uncomplete clocks

where did your patriots went?

main rig

i can only go up 2mhz at a time with the gigabyte

btw here is main rig http://valid.canardpc.com/show_oc.php?id=789591

Velvet Wafer · Oct 25, 2009

seems that yout specs are a little outdated,eh?

ah, i know that from the gigabyte of a friend!
fucking nvidia chipsets

!

EDIT: have you tried to achieve 300+ htt with this board and this proc? i could! ;-) 380-390 i maxed out

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
seems that yout specs are a little outdated,eh?
ah, i know that from the gigabyte of a friend!
fucking nvidia chipsets !

updated specs :toast:

what board and what cpu?

Velvet Wafer · Oct 25, 2009

p_o_s_pc said:
updated specs

what board and what cpu?

http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=4371#anchor_os

a 5000+ NON Black Edition

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=4371#anchor_os

a 5000+ NON Black Edition

i will try with my gigabyte and 4200+

ram maybe limiting factor

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
http://www.gigabyte.de/Support/Motherboard/BIOS_Model.aspx?ProductID=4371#anchor_os

a 5000+ NON Black Edition

this is for you
http://valid.canardpc.com/show_oc.php?id=789615

Velvet Wafer · Oct 25, 2009

ah sry i got you wrong.^^
i made the high htt with the biostar, my apologies

the gigabyte crapped out at 290

so far things look good. push it a little more

p_o_s_pc · Oct 25, 2009

Velvet Wafer said:
ah sry i got you wrong.^^
i made the high htt with the biostar, my apologies
the gigabyte crapped out at 290

so far things look good. push it a little more

don't want to push any higher I just want to let it crunch. I have maxed out the gigabyte board before if you would like i will dig up the screen shots

the gigabyte board is a hell of a clocker can get higher HT speeds then the biostar can but not by vary much.Still impressive for a 3 year old ~$70 board

Velvet Wafer · Oct 25, 2009

p_o_s_pc said:
don't want to push any higher I just want to let it crunch. I have maxed out the gigabyte board before if you would like i will dig up the screen shots

the gigabyte board is a hell of a clocker can get higher HT speeds then the biostar can but not by vary much.Still impressive for a 3 year old ~$70 board

your proc is probably as old,if not older.

so it fits.

i just looked,
my 939 cruncher does from 800 up to 1100ppd, awesome!

it just has 2.9ghz, but its L2 caches are like 30% faster than that of a g2. i have proof

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Tower of Power / Sechs
Processor	i7 14700K / i7 5820k @ 4.5ghz
Motherboard	ASUS ROG Strix Z690-A Gaming WiFi D4 / X99S GAMING 7
Cooling	CM MasterLiquid ML360 Mirror ARGB Close-Loop AIO / CORSAIR Hydro Series H100i Extreme
Memory	CORSAIR Vengeance LPX 32GB (2 x 16GB) DDR4 3600 / G.Skill DDR4 2800 16GB 4x4GB
Video Card(s)	ASUS TUF Gaming GeForce RTX 4070 Ti / ASUS TUF Gaming GeForce RTX 3070 V2 OC Edition
Storage	4x Samsung 980 Pro 1TB M.2, 2x Crucial 1TB SSD / Samsung 870 PRO 500GB M.2
Display(s)	Samsung 32" Odyssy G5 Gaming 144hz 1440p, ViewSonic 32" 72hz 1440p / 2x ViewSonic 32" 72hz 1440p
Case	Phantek "400A" / Phanteks “Enthoo Pro series”
Audio Device(s)	Realtek ALC4080 / Azalia Realtek ALC1150
Power Supply	Corsair RM Series RM750 / Corsair CXM CX600M
Mouse	Glorious Gaming Model D Wireless / Razer DeathAdder Chroma
Keyboard	Glorious GMMK with box-white switches / Keychron K6 pro with blue swithes
VR HMD	Quest 3 (128gb) + Rift S + HTC Vive + DK1
Software	Windows 11 Pro x64 / Windows 10 Pro x64
Benchmark Scores	Yes

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Tower of Power / Sechs
Processor	i7 14700K / i7 5820k @ 4.5ghz
Motherboard	ASUS ROG Strix Z690-A Gaming WiFi D4 / X99S GAMING 7
Cooling	CM MasterLiquid ML360 Mirror ARGB Close-Loop AIO / CORSAIR Hydro Series H100i Extreme
Memory	CORSAIR Vengeance LPX 32GB (2 x 16GB) DDR4 3600 / G.Skill DDR4 2800 16GB 4x4GB
Video Card(s)	ASUS TUF Gaming GeForce RTX 4070 Ti / ASUS TUF Gaming GeForce RTX 3070 V2 OC Edition
Storage	4x Samsung 980 Pro 1TB M.2, 2x Crucial 1TB SSD / Samsung 870 PRO 500GB M.2
Display(s)	Samsung 32" Odyssy G5 Gaming 144hz 1440p, ViewSonic 32" 72hz 1440p / 2x ViewSonic 32" 72hz 1440p
Case	Phantek "400A" / Phanteks “Enthoo Pro series”
Audio Device(s)	Realtek ALC4080 / Azalia Realtek ALC1150
Power Supply	Corsair RM Series RM750 / Corsair CXM CX600M
Mouse	Glorious Gaming Model D Wireless / Razer DeathAdder Chroma
Keyboard	Glorious GMMK with box-white switches / Keychron K6 pro with blue swithes
VR HMD	Quest 3 (128gb) + Rift S + HTC Vive + DK1
Software	Windows 11 Pro x64 / Windows 10 Pro x64
Benchmark Scores	Yes

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

TPU's WCG/BOINC Team

F@H&WCG addict

Moderato®™

Moderato®™

Moderato®™

F@H&WCG addict

WCG Team Assistant

Moderato®™

F@H&WCG addict

F@H&WCG addict

Moderato®™

Attachments

F@H&WCG addict

F@H&WCG addict

F@H&WCG addict

F@H&WCG addict

F@H&WCG addict

F@H&WCG addict