TPU's F@H Team

El Fiendo · Nov 14, 2009

Agreed. I dropped Rivatuner after realizing it didn't work in 7 correctly.

p_o_s_pc · Nov 14, 2009

I have used Precision before. I just didn't feel like dl'ing it again.I used riva because it was already on my network drive so i didn't have to wait for it to download.. but after being about 2k points lower today because of my overclocks i think i am going to drop it again and go with Precision... BTW still use Rivatuner on my other rigs and it works great (but running XP pro)

[Ion] · Nov 14, 2009

p_o_s_pc said:
lower the core clock about 25-50mhz or leave stock and oc shaders only.I have my 8800GT at STOCK VOLTS running 635/1915(c/s) 24/7 folding stable by using the low core high shader. When i overcloked both i maxed around 700/1800... BTW the higher shaders give me about 600ppd more

I've set the mode to Unlinked and I'm independently overclocking the shaders (core and memory are at stock speeds of 650 and 400mhz). Should I lower the core 25-50mhz, and try to push the shaders up more?

BUCK NASTY · Nov 14, 2009

p_o_s_pc said:
I have used Precision before. I just didn't feel like dl'ing it again.I used riva because it was already on my network drive so i didn't have to wait for it to download.. but after being about 2k points lower today because of my overclocks i think i am going to drop it again and go with Precision... BTW still use Rivatuner on my other rigs and it works great (but running XP pro)

Before Precision, I used Rivatuner on all my rigs. Great app, but could not get every card to load the preset clocks/settings. When I had to power down or had a power outage, it would take me 30+ minutes to get everything back up and running:shadedshu. I'm glad those days are over.

NastyHabits · Nov 14, 2009

I use W1zzard's GPU Tool for testing and finding the limits of my cards. Afterwords I use EVGA precision on my Nvidia cards for set-it-and-forget-it ease of use. Precision lacks the granularity of GPU Tool. GPU Tool is still in Beta and not suitable for everyday use, but allows me to set higher settings for benchmarking. GPU Tool is also currently works much better with ATI than Nvidia cards. I've also used RBE to modifiy the BIOS on my ATI 48xx cards. (This cured stuttering when switching from 2D to 3D, and allowed consistant higher 3D and idle voltage settings). I haven't had the courage yet to try a Nvidia BIOS editor.

BTW: A BIG thanks to Buck Nasty for leading me to EVGA precision. Besides being a great guy and folding monster, I really like his nick.

p_o_s_pc · Nov 14, 2009

@nastyhabits modding a nvidia BIOS isn't hard at all. ALL of my cards have a modded BIOS even my old 7900GS does.I also didn't think the ATI bios was hard to edit.(only did 1 card a 3870 all the others are nvidia)

[Ion] · Nov 14, 2009

p_o_s_pc said:
@nastyhabits modding a nvidia BIOS isn't hard at all. ALL of my cards have a modded BIOS even my old 7900GS does.I also didn't think the ATI bios was hard to edit.(only did 1 card a 3870 all the others are nvidia)

How do you BIOS mod the cards? I might be interested in doing so on the 9600GT to set slightly higher shader clocks/fan speeds

p_o_s_pc · Nov 14, 2009

[Ion] said:
How do you BIOS mod the cards? I might be interested in doing so on the 9600GT to set slightly higher shader clocks/fan speeds

I will tell you in a PM later you nvibter(SP?) and some other progy to flash.Will give details later in a PM as i have to go. :toast:

NastyHabits · Nov 14, 2009

[Ion] said:
How do you BIOS mod the cards? I might be interested in doing so on the 9600GT to set slightly higher shader clocks/fan speeds

You need a Nvidia BIOS editor (NiBiTor), a copy of your bios (you can get one using GPU-Z), and a Nvidia BIOS flashing tool.

Here's a good guide to using NiBiTor http://www.softpedia.com/progScreenshots/NVIDIA-BIOS-Editor-Screenshot-4977.html You can also download it from there.

To save your card's BIOS using GPU-Z, click on the little icon to the right of "BIOS Version" on the main screen of GPU-Z. Or you can download a copy from your cards manufacturer.

Your card's manufacturer should also have a bios flashing tool available for download.

All that said, that's just a generic description of what you need. I would seek advice from P_O_S PC before I went any further.

If you want to flash your ATI card, go to our very own TPU forum on RBE here: http://forums.techpowerup.com/forumdisplay.php?f=63

p_o_s_pc · Nov 14, 2009

thanks nasty for the basics i didn't have time to give any detail... Ion if you have questions or need help with something(or want me to mod it for you) PM me and i will help you out :toast:

p_o_s_pc · Nov 15, 2009

good god fit what are you running!?

Fitseries3 · Nov 15, 2009

somethin new :pimp:

p_o_s_pc · Nov 15, 2009

Fitseries3 said:
somethin new

can you give anymore info?
EDIT I see GT300 shit that is amazing

mstenholm · Nov 15, 2009

34000 PPD for the 5792? Give me some. Even on my lame 9800 GTX+ it wolud take me few a days to be in top 100.

mstenholm · Nov 15, 2009

Well dont tell. Just let it sweat for the casue

oily_17 · Nov 15, 2009

mstenholm said:
34000 PPD for the 5792? Give me some. Even on my lame 9800 GTX+ it wolud take me few a days to be in top 100.

I think Fahmon is screwed up as it is still taking ~1m50 for each 1%

Fitseries3 · Nov 15, 2009

gah... got a shitty email from my source telling me to take down the screenshot. :/

as for f@hmon, its not 100% accurate but i have completed a few rounds of WU's since the screenshot which was only 30-45mins.

Weer · Nov 15, 2009

Fitseries3 said:
gah... got a shitty email from my source telling me to take down the screenshot. :/

Did you seriously get the card I've been waiting half a year to get?!

mstenholm · Nov 15, 2009

oily_17 said:
I think Fahmon is screwed up as it is still taking ~1m50 for each 1%

Yes for the one that is running in the bottom. The top one had aroud 34000 PPD. Look at the lower right hand corner and subtract the score from the lower one and you have 34000 PPD. Sweet. Now I know what I want for Christmas

mstenholm · Nov 15, 2009

Fitseries3 said:
gah... got a shitty email from my source telling me to take down the screenshot. :/

as for f@hmon, its not 100% accurate but i have completed a few rounds of WU's since the screenshot which was only 30-45mins.

Still 30-45 min for a 787 point WU is GOOD

BUCK NASTY · Nov 15, 2009

Fitseries3 said:
unfortuantly i have to stop it now to return the cards. at least i got to play with them over the weekend though.

next up is a i9

Fitseries3 said:

dual gt300 samples

Click to expand...

Fits, I'm gonna call you out. I know a little about GPU2 and the frames/progress you show are for a 9800gtx/GTS250. Should I go into more detail and show everyone? Do not post that crap in this section.

Fitseries3 · Nov 15, 2009

im fine with that. i wouldn't believe me either even if i was a reputable source of info unless pics where supplied.

i don't have any reason to "crap" in this thread nor do i have any g92 or gtx260's in my possession.

im not going to argue but i know these are something new and i will comment no more.

oily_17 · Nov 15, 2009

mstenholm said:
Yes for the one that is running in the bottom. The top one had aroud 34000 PPD. Look at the lower right hand corner and subtract the score from the lower one and you have 34000 PPD. Sweet. Now I know what I want for Christmas

The total PPD was over 300,000 points which is totally screwed up...

BUCK NASTY · Nov 15, 2009

Fitseries3 said:
im fine with that. i wouldn't believe me either even if i was a reputable source of info unless pics where supplied.

i don't have any reason to "crap" in this thread nor do i have any g92 or gtx260's in my possession.

im not going to argue but i know these are something new and i will comment no more.

Then why post any of it? Could it be you are addicted to any form of attention good or bad? I can also mess with the system clocks and exaggerate ppd.

Fitseries3 · Nov 15, 2009

has nothing to do with anything you mentioned.

i shoulda never posted it so let this be the end.

System Name	AMD \| Intel \| Chumpy
Processor	PHII 955BE Stock \| i7 920 D0 4.01 GHz \| i7 920 D0 4.01 GHz
Motherboard	MSI 790FX-GD70 \| EX58 - UD5 \| E760 4 Way SLI
Cooling	Zalman 9700 CNPS \| Water Loop \| Water Loop
Memory	4 GB XMS3 1600 MHz \| 6 GB Dominators 1600 MHz \| 6 GB Dominators 1866 MHz
Video Card(s)	3 x 9600GSO, GTX260 216 \| 2 x GTX 260 216 \| GTX 260 216, 9600 GSO
Storage	WD 640GB \| Couple o' 5400RPMs \| WD 1TB
Case	Cosmos S \| Lancool K62 Dragonlord \| Lian Li PC-P80 Armor
Power Supply	TX850 \| HX 1000 \| HX 1000
Software	Win 7 Home Premium \| Win 7 Ultimate \| Vista Home Premium

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

System Name	Main Rig
Processor	AMD FX-4130 @ 4.8Ghz
Motherboard	ASUS M5A99X Evo
Cooling	Coolermaster Hyper 212+
Memory	8GB GSkill DDR3 1600
Video Card(s)	ASUS GTX 970 Strix @ 1503Mhz Core
Storage	Corsair Force 90gb SSD/ WD Caviar Blue 750gb
Display(s)	ASUS 24" IPS
Case	Coolermaster Centurion 590
Audio Device(s)	Onboard
Power Supply	Antec TP750 80+
Software	Windows 7 Ultimate 64

System Name	Rex
Processor	Ryzen 2600
Motherboard	GigaByte B450M DS3H
Cooling	Wraith
Memory	16 GB Corsair Vengence 3000
Video Card(s)	Evga GTX 1660 SC
Storage	XPG M.2, Samsung 860 SSD, WD Black 1 TB
Display(s)	ASUS VG248
Case	Corsair mATX cube. (Alas they don't make it anymore)
Power Supply	Corsair HX 600 Watt
Mouse	Microsoft
Keyboard	Logitech
Software	Windows 10 64 ibit

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 500 GB SSD
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 7 & 10 / Linux / Win 10

Processor	Q9550 @3.8
Motherboard	Asus Maximus Extreme
Cooling	Custom water cooling
Memory	4GB Patriot Viper DDR3 1600MHz
Video Card(s)	2x HD4870 512MB
Storage	2x 500GB
Display(s)	3x LG L226WTQ 22" Widescreen LCD
Case	Modded TJ07
Audio Device(s)	On board
Power Supply	PC P&C Silencer 750
Software	Windows 7 Ultimate

System Name	//////////////////////////////////////Crunching/Folding Builds\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Processor	Q8400@ 4.0Ghz \| Q6600 @ 3.6Ghz \| E7300 @ 3.8Ghz \| E5300 @ 4.3Ghz \| E5300 @ 3.9Ghz \| E2180 @ 2.0Ghz \|
Motherboard	ASUS P5Q-E \| Asus P5Q Pro \| Gigabyte EG45-DS2H \| Gigabyte EP35-DS3H \| Gigabyte NV73 \| E-Sonic P35-G
Cooling	TRUE [Lapped] \| TRUE \| Thermalright SI-128 \| Stock \| Stock \| Stock
Memory	G.Skill 8192MB @ 1066Mhz \| G.Skill 4096MB \| OCZ 2048MB \| G.Skill 2048MB \| PNY 2048MB \| OCZ 1024MB
Video Card(s)	GTX 280 + 8800 GTS 512 \| 9800 GX2 + 8800 GTS 512 \| 6600 GT \| 8800 GS \| 9600 GSO 512
Storage	G.Skill 64GB SSD (OS) \| Segate 750GB [Downloads] \| 5TB JBOD [Movies] \| 3TB JBOD [Else] \| 1.5TB [Ex]
Display(s)	QUAD Monitors: Dell 2007FP [20"] + Dell 3007WFP-HC [30"] + Dell 2007FP [20"] \| Dell 2407WFP-HC [24"]
Case	Antec P190 \| Antec Three-Hundred \| Antec NSK2400 \| Thermaltake Strike MX \| HEC 6T10 \| HEC 8K01
Audio Device(s)	Creative X-Fi XtremeGamer PCI + [Audiophile HD600] + [Creative G500 + Logitech X-530 = 10 speakers]
Power Supply	OCZ 750w [62A] \| OCZ 750w [62A] \| Antec 380w [31A] \| Antec 650w [54A] \| OCZ 400w [33A] \| GeN [20A]
Software	Windows 7 Ultimate 64-bit + Windows XP 64-bit \| Windows Vista SP2 64-bit \| Windows 7 RTM 64-bit
Benchmark Scores	////////////////////////////////66,666 [Crunching] + 45,455 [Folding]\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\

TPU's F@H Team

F@H&WCG addict

WCG Team Assistant

4P Enthusiust

F@H&WCG addict

WCG Team Assistant

F@H&WCG addict

F@H&WCG addict

F@H&WCG addict

Eleet Hardware Junkie

F@H&WCG addict

Eleet Hardware Junkie

New Member

4P Enthusiust

Eleet Hardware Junkie

4P Enthusiust

Eleet Hardware Junkie