• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

My Project Log:

M

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Specs
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
Mmmmmm Pie.....

Dont forget to share ur experience with the Dremel (may save others from the same fate)

Did I forget to mention Mmmmm pie?
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
MKmods said:
Mmmmmm Pie.....

Dont forget to share ur experience with the Dremel (may save others from the same fate)

Did I forget to mention Mmmmm pie?
Click to expand...

I was going to wait on you to chime in before i wrote that.. :roll:


I plugged it in for the first time yesterday.. Yes, I know i've had it for 2 weeks.. but in the two weeks, I had 1 day off.. So no playing around.. :roll:

Well, it ran, but it was "slow" at "20".. Also, grinding. Then, not even a min, the motor started to smoke.. Bad stuff.. So, after wring MK, :respect: I was going to turn it in.. Was is the term..

I go bored after eating a nice steak dinner (11pm) over at my bro's house.. so, at midnight, I started watching Bleach's movie.. Well, one of 4.. lol I said, flop it, and looked into the guides. I saw the "taking apart" of the dremel.. So, I did just that.. low and behold.. The cradle that keeps the motor in place.. turned backwards.. it was almost 2, so my camera wasn't what I was thinking :banghead:, So turned it around, and out it all back together..

I played with it all day, turning the speed up, and down, making sure nothing was wrong.. There wasn't.. So, i'm not going to turn it back in.. I still got a few cuts to do, and if it does.. Well.. 2 more weeks.. :roll:

But, from this.. I really don't feel that dremel is worth the money.. Not even if you can change the speed of the dremel.. Black and Decker all the way.. Going to grab one and probably give this one to someone..
 
M

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Specs
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
They have plastic brush holders (that tend to melt when the tool is used a lot) Basically they are fine for little detail work but if you force them they cant handle it.

I keep babbeling to get the B&D and the more others share their Dremel probs that way others dont have the same probs..

Thx CS



(Im sure the B&D is not the "Lambo" of power tools (personally I try to avoid B&D), but for 1/3 the cost and 10X the life the RTX is really good)
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
Yeah, I've seen a lot of dremel problems in my time via school... But, hey, that was a few years ago.. Now I thought things changed.. Nope.. Well, they did, but not the good way..

I'll get the b&d for christmas along with a drill. Let someone get something for me.. lol
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
well dremmel is for detail work mostly, not for heavy duty cutting or drilling....

having this in mind I recently bought a few power tools which I hope will make my life easier when modding!
sometimes is better to spend on tools than parts....;)

glad to see you are doing good man! :toast:
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
Yeah, a dremel is the good for the detail.. But, to straight up smoke from the motor.. That's something else..

Man, gotta see if there is a thread for tools..

Glad to see ya on here man! hope the misses and little one is doing good!

:toast:
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
we are all doing great! thanks...

actually, there should be a thread about tools and mini tutorials for their uses...
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
Maybe we can get MK/cd to do one? lol..

Man, I'm can't wait to get off and paint the res holders.. I feel like a little kid at Christmas! :rockout:

5h down, 9h to go! :roll:
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Cold Storm said:
Maybe we can get MK/cd to do one? lol..

Man, I'm can't wait to get off and paint the res holders.. I feel like a little kid at Christmas! :rockout:

5h down, 9h to go! :roll:
Click to expand...

we should start a poll just for that! lol

I know what you mean, man!:toast:
 
M

MKmods

Case Mod Guru
Joined
Feb 26, 2008
Messages
5,697 (0.97/day)
Location
Nevada
System Specs
System Name Crossflow III
Processor AMD 965 (4.04Ghz)
Motherboard Asus Crosshair III
Cooling Air
Memory 4 gigs Mushkin 7-7-7-20@1T
Video Card(s) single 9800GT
Storage Raptor 150's in Raid0
Display(s) LG Flatron 24"
Case Custom
Audio Device(s) AuzenTech X-Raider W/OP637
Power Supply Custom modded Corsair 750HX
Software Win 7 64/Solaris Utility
Benchmark Scores 3DMark06--21963 so far
tzitzibp said:
we are all doing great! thanks...

actually, there should be a thread about tools and mini tutorials for their uses...
Click to expand...

That would be a very good idea (the time needed is the prob)

There are just a few basic tools that are needed to accomplish 90% of modding.
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
MKmods said:
That would be a very good idea (the time needed is the prob)

There are just a few basic tools that are needed to accomplish 90% of modding.
Click to expand...

I agree... still, it would be great to setup a thead with tools and pictures of them being used on specific material and mods!!!
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
If, we can get just tools together, I can do a little write up. I'll pm CD and ask if he'd go threw it. Also, find the thread that's out there.. I know there was one for "modding a case" I think Fox34 made it...

Yeah, Fox made a thread on modding. See, the problem is, we tend to do the talking here and not in the "case,modding, electronics" sub-forum...
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
I'll look threw that for stuff.. I'll also go threw my emails, I think I talked with Dan a but this before, and it was a no go due to the thread... Don't remember..
 
tzitzibp

tzitzibp

Joined
Nov 17, 2007
Messages
2,228 (0.37/day)
Location
Larisa, Greece
System Specs
System Name StarCruiser Dark Knight v.2
Processor Intel® Core™ i5-3570K
Motherboard P8Z77-V LX
Cooling 1x custom W/C loop/ inflow:6x120 /outflow:4x120, 2x200
Memory Viper 3 Black Mamba (4x4GB)
Video Card(s) Powercolor LCS 5870
Storage 1X 128GB OCZ, 2 x 1.500 Gb Seagate
Display(s) Samsung 24" LC24F396
Case custom MDF case (I BUILT IT) check sig.....NOW
Audio Device(s) Onboard
Power Supply Tagan 900 watt
Software Win 7 RC / Open office / Games
Cold Storm said:
I'll look threw that for stuff.. I'll also go threw my emails, I think I talked with Dan a but this before, and it was a no go due to the thread... Don't remember..
Click to expand...

ok man

let me know....
I 'll try to get some nice pics tomorow!
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
A little bit of an update.

I got the ribbon and adapters in.. So I'll be modding the cable for my Mobo so it's longer then two feet.. Wish me luck on that!

Then I've went and ordered two 140mm fans and a Rad cover for the bottom of my case.. Since I have it on wheels, Thanks Steelkane :rockout:, I'll be placing the fans under the case, while the rad cover will be on the bottom of the case.. It should turn out good. I'll be grabbing some supplies at Home Depot to cover the fans up, and also make the boxes I need to make.

So, the three day weekend will be fun!

Oh yeah, Got my Olympus E-520 shipped and expected tomorrow. So, I'll be taking "better" shots from now on! :rockout:
 
Chicken Patty

Chicken Patty

Joined
Nov 27, 2007
Messages
28,790 (4.81/day)
Location
Miami, Florida
System Specs
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
Cold Storm said:
A little bit of an update.

I got the ribbon and adapters in.. So I'll be modding the cable for my Mobo so it's longer then two feet.. Wish me luck on that!

Then I've went and ordered two 140mm fans and a Rad cover for the bottom of my case.. Since I have it on wheels, Thanks Steelkane :rockout:, I'll be placing the fans under the case, while the rad cover will be on the bottom of the case.. It should turn out good. I'll be grabbing some supplies at Home Depot to cover the fans up, and also make the boxes I need to make.

So, the three day weekend will be fun!

Oh yeah, Got my Olympus E-520 shipped and expected tomorrow. So, I'll be taking "better" shots from now on! :rockout:
Click to expand...

The pics I take are with a E-500 :toast: Can't wait to see the new shots.
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
sweetness! :rockout: I can't wait for the camera.
 
Chicken Patty

Chicken Patty

Joined
Nov 27, 2007
Messages
28,790 (4.81/day)
Location
Miami, Florida
System Specs
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
Cold Storm said:
sweetness! :rockout: I can't wait for the camera.
Click to expand...

Here are a few shots, check it out. Don't know if you have seen them.





 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
Thanks CP. I'm very much pleased ording that camera for my first one.. A few people last night where showing me their pictures from their Olympus camera and I came to see that it was what I wanted for my first one..
 
Chicken Patty

Chicken Patty

Joined
Nov 27, 2007
Messages
28,790 (4.81/day)
Location
Miami, Florida
System Specs
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
They are very solid cameras and their ease of use is amazing. You'll love it bro!
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
new Camera UPDATE!

Yep you heard it right.. Got my Olympus E520 today.. Woke up an hour ago and started playing!!

So, you want to know how better this camera is?? Well, here is what my Old Nikon P60 can do. best..




And, here is my baby!




My cans!!!




God, I love this camera!! Just gotta learn this camera up!!!

:toast:
 
Chicken Patty

Chicken Patty

Joined
Nov 27, 2007
Messages
28,790 (4.81/day)
Location
Miami, Florida
System Specs
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
Once you start learning how to use it, you'll love it. Suggestion? Bro I got a dynex tripod from Best Buy. that same shot you took, would look a million times better without a flash. Just need a tripod in order to do that.

Anyhow, glad you received it and that you are enjoying it. :rockout:
 
Cold Storm

Cold Storm

Battosai
Joined
Oct 7, 2007
Messages
15,010 (2.49/day)
Location
In a library somewhere on this earth
System Specs
System Name Haro
Processor AMD 1700x
Motherboard AsRork x370 Taichi
Cooling EK Custom Loop - CPU only
Memory 32gb G-Skill Trident Z
Video Card(s) EVGA 1080 Superclock 2
Storage Too Many
Display(s) Viewsonic VX2450WM-LED 24" & LG 32 IPS
Case Cooler Master Cosmos II
Power Supply Cooler Master V1000
Mouse SteelSeries Rival 500
Software Win10 Pro
Benchmark Scores i5 750 4.62ghz pi runs // Evga FTW p55
All ready have a tripod with cleaning tools. Just in the "learning" stage.

Thanks.

:toast:
 
Chicken Patty

Chicken Patty

Joined
Nov 27, 2007
Messages
28,790 (4.81/day)
Location
Miami, Florida
System Specs
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh, WQHD Computer Monito
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
Cold Storm said:
All ready have a tripod with cleaning tools. Just in the "learning" stage.

Thanks.

:toast:
Click to expand...

Awesome. You've seen some of my shots, even in my room without much light. Once you get some experience with it, you'll be taking pics like a pro dude :rockout:
 
You must log in or register to reply here.
Top