- Joined
- Feb 19, 2007
- Messages
- 12,453 (1.98/day)
- Location
- Yankee lost in the Mountains of East TN
Processor | 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700 |
---|---|
Motherboard | MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3) |
Cooling | EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2) |
Memory | 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator |
Video Card(s) | Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros |
Storage | Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe |
Display(s) | Acer 1080p 22"/ (3) Samsung 22" 1080p |
Case | (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF |
Power Supply | EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w |
Mouse | Generic Black wireless (5) |
Keyboard | Generic Black wireless (5) |
Software | Win 10/Ubuntu |
OK. I can't figure this out. It just started today. When I try to run the Heaven benchmark in DX11 it hard locks about 15 seconds in, every time I try, without fail. It will run perfect in DX9 and DX10 with no problems. I can also pass Vantage without fail. These are the things I've tried without success:
Uninstalled and reinstalled Unigine Heaven several times
Tried Catalyst 10.1, 10.2, 10.3. (Used driver sweeper each install)
Ran at stock and overclocked, with stock voltage, and with an extra bump (In 10.1). Afterburner voltage adjustment does not work in 10.2 and 10.3.
I am running running crossfire
So, any ideas? Anyone experience the same thing? Any help is greatly appreciated, as this is very frustrating.
Uninstalled and reinstalled Unigine Heaven several times
Tried Catalyst 10.1, 10.2, 10.3. (Used driver sweeper each install)
Ran at stock and overclocked, with stock voltage, and with an extra bump (In 10.1). Afterburner voltage adjustment does not work in 10.2 and 10.3.
I am running running crossfire
So, any ideas? Anyone experience the same thing? Any help is greatly appreciated, as this is very frustrating.
Last edited: