TPU's F@H Team

[xbonez]

Depending on my financial status, when my tax returns come in, I can touch 100k.

 

[Josh154]

Depending on my financial status, when my tax returns come in, I can touch 100k.

Damn you! Just when i was thinking i'd be able to close the gap! Look's like it's time for me to go turn in a app at McDonals Money is money though and my rig needs upgrading. What do 970's go for these days?

 

[hertz9753]

Depending on my financial status, when my tax returns come in, I can touch 100k.

Trust me on this, the PPD are never as high as you think they will be.

 

[Josh154]

Trust me on this, the PPD are never as high as you think they will be.

That's why we make it be that

 

[johnspack]

Told ya so! Finally cracked 5mil, thank god....

 

[Josh154]

Well guys. Woke up this morning to find the rig turned off and it will not turn back on. Think i fried my PSU?

 

[xbonez]

Ooh, ouch. Umm, if you have the time and patience. Test one component at a time. Start with just motherboard/cpu. Does it turn on? If so, add RAM and repeat. So on and so forth.

To test PSU, remove all connectors from all components, plug in a molex case fan and short the 24pin motherboard connector. Does it turn on?
Here's how to do it: http://www.duxcw.com/faq/ps/ps4.htm. Its safe. This is how I was bleeding my loop.

 

[Josh154]

Nah it doesn't even turn on. According to my EOC stat's it just happened in the last 2 and a half hours. I went and felt behind the psu and im not gonna lie it felt pretty stinkin hot. When the switch is flipped my lan light is on though on my mobo?

It's a paperclip from the green wire to a black wire?

 

[xbonez]

Yes, from green to any black(ground).

 

[Josh154]

I managed to get it fired back up. Just cleared CMOS and now it works. I love that little button PSU is putting out a lot of heat though. I can't wait till i get my new one today!

 

[xbonez]

So, you lost your OC too, right? I don't see why a PSU problem would be fixed by clearing the CMOS...unless your OC'ed system is drawing too much...dunno. Good thing you get the new PSU today.

 

[Chicken Patty]

Maybe that PSU needs to be dusted?

 

[Josh154]

So, you lost your OC too, right? I don't see why a PSU problem would be fixed by clearing the CMOS...unless your OC'ed system is drawing too much...dunno. Good thing you get the new PSU today.

Nah i set it back to my OC. It may have been shut off due to temps. I had my window shut last night and when i woke up im willing to bet it was at least 80°F in here most likely warmer. Im thinking it could have thermalled or something because usually when it shuts off due to "instability" because of the low PSU it just restarts. The time i had it thermal it just quit and didn't restart and it was sitting there shut off earlier so that's my thoughts possibly but who knows.

Maybe that PSU needs to be dusted?

Nah it should be pretty clean, i have a dust filter on the intake that i clean weekly. It could need it though, i have my new PSU coming today though so im not gonna worry about it. It all seem's fine now again and i didn't really loose any points so it's fine with me

Just realized i have my "crazy folders" badge!

 

[xbonez]

My WC loop has been running with the sys on idle for about 12+ hours now. Gf will be going to my apt soon, so I'll get feedback on her. Hopefully one of the pipes didn't burst or something...lol.

 

[PVTCaboose1337]

I just arrived at my dorm room yesterday from break. Apparently power was cut off, so my computer died early on in the break. Because of this I lost a potential 200k. No matter, I will have my computer running 24/7. Hopefully I reach 1 mil before March!

 

[xbonez]

In BIOS, you can set it so your PC turns on when power is returned. If you put the folding client on start up, you're all set.

Fans and grills delivered.

 

[Josh154]

My WC loop has been running with the sys on idle for about 12+ hours now. Gf will be going to my apt soon, so I'll get feedback on her. Hopefully one of the pipes didn't burst or something...lol.

Haha let us know how it is. Hopefully everything is good!

I just arrived at my dorm room yesterday from break. Apparently power was cut off, so my computer died early on in the break. Because of this I lost a potential 200k. No matter, I will have my computer running 24/7. Hopefully I reach 1 mil before March!

Dang that sucks You should be able to reach that 1 mil hopefully!

In BIOS, you can set it so your PC turns on when power is returned. If you put the folding client on start up, you're all set.

Fans and grills delivered.

Nice! I should set mine to start up when power is returned. Now you don't have anything else coming in the mail now do you? Put those fan's on the rad and hopefully you will see amazing temps on the 920!

 

[xbonez]

So, a question: When an OC is restricted because the motherboard is getting too hot, is it most often the NB, SB or VRMs that are overheating?

The EVGA x58 has some waterblocks available for each, as well as complete chipset coolers, but they're more expensive.

 

[Josh154]

Well usually the NB and VRM cooling is in the same like on my ASRock so both my northbridge and VRM's get scorching hot. Now on your evga the SB and NB are linked and the VRM's have there own. For my board my VRM's get the hottest.

I guess you'd have to have some other's give you better information. But you should definitely see what you can clock to as you haven't even tried stressing the board with any OC's yet. I'd say mount a fan on your VRM sink and you should be good.

 

[xbonez]

I'd say mount a fan on your VRM sink and you should be good.

Hmm...that sounds like a good idea. An 80mm fan and a ziptie/rubber-band/double sided tape is definitely worth a shot. But yeah, I'll try stressing it first and seeing how far it goes.

 

[xbonez]

So, after reading up tons on the EVGA forums, apparently due to the thermal design (or some crap like that which was beyond me), the only way to get accurate NB temps on my board is from BIOS. So, I'll check that today.

 

[Josh154]

Hmm...that sounds like a good idea. An 80mm fan and a ziptie/rubber-band/double sided tape is definitely worth a shot. But yeah, I'll try stressing it first and seeing how far it goes.

So, after reading up tons on the EVGA forums, apparently due to the thermal design (or some crap like that which was beyond me), the only way to get accurate NB temps on my board is from BIOS. So, I'll check that today.

Definitely put a fan on that VRM sink if you can. The cooler you have everything running the more stable and higher OC'd you will be able to get it. We need to see more points from you bonez so get that thing running ASAP with some cards and -bigadv!

 

[xbonez]

It should be up and running tonight with all the cards.

Btw, great deal on 470s. The guys selling two (MSI and EVGA) for 350, shipped.
http://hardforum.com/showthread.php?t=1576296

I'm thinking sometime in Feb, I'll watercool my main rig too. The Rasa is cheap, very effective and stupid easy to set up.

 

[Josh154]

Yeah i seen that thread yesterday Sucks though as i don't have $350 to spend right now

 

[xbonez]

Just found this quote from a user of my motherboard:

I have the "vanilla" or E758 model. There's a fan blowing away from the PCIe slots towards the CPU area. NB temps won't be a concern at all, mine right now is idling at 30C, with 70F ambient.

My ambient is about 75ish, and my NB idles at around 30-34. So, doesn't seem like mine's running any hotter than it should.

I'll get a fan for the VRMs anyways.