• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

I5 2500k

Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
That's the thing. I have found it but no option to disable that I can see. Just Auto,Regular,Medium, High, Ultra High and Extreme. I have it set to regular at the moment :confused:

EDIT - Just read your edited post Paulie and my LLC actually powers up to what it needs rather than down.

Right. But if you decrease vcore, it will not spike as high when it is under load. I like load spiking slightly more than going BSOD because vcore drops too low when the cpu is stressed.
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
OK just entered 1.32 in manual cpu voltage. Set LLC to High, booted up and tried prime 95. It shot straight to 1.39v???? From your post Paulie should I try lowering my vcore then and see how that goes?
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
OK just entered 1.32 in manual cpu voltage. Set LLC to High, booted up and tried prime 95. It shot straight to 1.39v???? From your post Paulie should I try lowering my vcore then and see how that goes?

Put it on medium, and set cpu voltage to 1.30v. If 1.30v is stable after testing, then try to bring it down a little more. I THINK my 2500K was able to do 4.5 on just 1.26v.
 
Last edited:
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Scratch that :) When I had entered the manual CPU voltage I hadn't pressed enter which meant it didn't accept the value entered DOH!!:) I have now changed it to 1.32 and LLC to high and running prime currently it's showing min voltage 1.32, max 1.33.....let's see how it goes!! Thanks for your help guys, PS Sandy Bridge Effin rocks. Boot up times even without an SSD are so swift.
 
Last edited:
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Scratch that :) When I had enterd the manual CPU voltage I hadn't pressed enter which meant it didn't accept the value entered DOH!!:) I have now changed it to 1.32 and LLC to high and running prime currently it's showing min voltage 1.32, max 1.33.....let's see how it goes!! Thanks for your help guys, PS Sandy Bridge Effin rocks. Boot up times even without a SSD are so swift.

What are your temps like in prime? You really shouldn't need that much vcore for 4.5 on that chip. If you prime ok for 15-20 minutes, lower the vcore one step, then test again. It's always good to get the vcore as low as possible and still be stable. It will keep your temps down. Better yet, run LinX for 20 cycles each time. It's fast, and if you pass 20, you are at least reasonably stable.
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
What are your temps like in prime? You really shouldn't need that much vcore for 4.5 on that chip. If you prime ok for 15-20 minutes, lower the vcore one step, then test again. It's always good to get the vcore as low as possible and still be stable. It will keep your temps down. Better yet, run LinX for 20 cycles each time. It's fast, and if you pass 20, you are at least reasonably stable.

Yeh I just saw that as a good starting point and if it's successful i will try tweaking it from there. As regards temps, I'm using a Corsair A70 with a push/pull setup but the fans are going through the resistors so they are silent and running at slower speed (I hate a noisy PC) Temps on Prime at the minute are loading around 65c. Whats the max safe temp you guys are working around for your chips?

EDIT - Still going strong on Prime, will try for a bit lower after a ciggie break.
 
Last edited:
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Yeh I just saw that as a good starting point and if it's successful i will try tweaking it from there. As regards temps, I'm using a Corsair A70 with a push/pull setup but the fans are going through the resistors so they are silent and running at slower speed (I hate a noisy PC) Temps on Prime at the minute are loading around 65c. Whats the max safe temp you guys are working around for your chips?

General rule of thumb is to stay out of the high 70's for stability testing. Supposedly, these chips have a 100c tjmax. and will throttle at 90c but they are 32nm chips, and I have to believe they are more sensitive to heat than Nehalem. If you are staying in the 60's you are doing fine. However, I gotta think if you can get under 1.30v, you'll find load temps in the mid to high 50's. My 2600k under a Venomous-X stays under 55c at 4.5 1.29v.
 
Joined
Oct 19, 2008
Messages
3,158 (0.56/day)
System Name White Theme
Processor Intel 12700K CPU
Motherboard ASUS STRIX Z690-A D4
Cooling Lian Li Galahad Uni w/ AL120 Fans
Memory 32GB DDR4-3200 Corsair Vengeance
Video Card(s) Gigabyte Aero 4080 Super 16GB
Storage 2TB Samsung 980 Pro PCIE 4.0
Display(s) Alienware 38" 3840x1600 (165Hz)
Case Lian Li O11 Dynamic EVO White
Audio Device(s) 2i2 Scarlett Solo + Schiit Magni 3 AMP
Power Supply Corsair HX 1000 Platinum
Hmm my chip is shooting up to 90+ degrees during linx at 4.8ghz 1.42 VCORE on my cooler .. that is with LLC at level 1.

I can't even get a decent overclock without LLC on, so with LLC at level 1 or 2 it gives the proc more VCORE overall right?...

The max I'm benching at the moment without LLC is 4.2ghz, that is where my wall is and I can get that stable using less than 1.3vcore with around 50+ degrees load. 4.3ghz won't even boot at the same voltages
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
General rule of thumb is to stay out of the high 70's for stability testing. Supposedly, these chips have a 100c tjmax. and will throttle at 90c but they are 32nm chips, and I have to believe they are more sensitive to heat than Nehalem. If you are staying in the 60's you are doing fine. However, I gotta think if you can get under 1.30v, you'll find load temps in the mid to high 50's.

Looks like I am going for a higher overclock tonight then :) BTW, I had to downgrade my GTX 460 to a GTS 450 to help fund these new parts. I pulled 23,500 in 3D Mark 06 with my 1090T@4GHz and GTX 460 @920/1830/200. This chip at 4.5GHz has managed to get a 21,000 3DMark Score out of the GTS 450 :eek: Would love to see what it could have done with my superclocked 460:cry:

That said every game I have tried so far is so smooth, actually smoother than before and GTA IV at max settings plays like a friggin dream :D
 
Last edited:
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Hmm my chip is shooting up to 90+ degrees during linx at 4.8ghz 1.42 VCORE on my cooler .. that is with LLC at level 1.

I can't even get a decent overclock without LLC on, so with LLC at level 1 or 2 it gives the proc more VCORE overall right?...

The max I'm benching at the moment without LLC is 4.2ghz, that is where my wall is and I can get that stable using less than 1.3vcore with around 50+ degrees load. 4.3ghz won't even boot at the same voltages

What you have to remember is the closer you get to the chips limit, the more vcore it will need every step of the way. The problem with Sandy Bridge is the enormous clock speed increments every time you push it further. So, if your board has a ton of vdroop, loadline is preventing it from dipping to low.

That 1.42v is really high for these chips. I know you like that 4.8ghz, but you are so much safe at 4.6 and something like 1.374v...just my 2 cents.
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Randomflip - i have internal PLL voltage disabled and also PLL voltage I have reduced down to 1.7250. That helped alot with temps and stability.

EDIT - Prime is still running like a champ so I'm just going to try 4.6 at the same settings :)
 
Joined
Oct 19, 2008
Messages
3,158 (0.56/day)
System Name White Theme
Processor Intel 12700K CPU
Motherboard ASUS STRIX Z690-A D4
Cooling Lian Li Galahad Uni w/ AL120 Fans
Memory 32GB DDR4-3200 Corsair Vengeance
Video Card(s) Gigabyte Aero 4080 Super 16GB
Storage 2TB Samsung 980 Pro PCIE 4.0
Display(s) Alienware 38" 3840x1600 (165Hz)
Case Lian Li O11 Dynamic EVO White
Audio Device(s) 2i2 Scarlett Solo + Schiit Magni 3 AMP
Power Supply Corsair HX 1000 Platinum
What you have to remember is the closer you get to the chips limit, the more vcore it will need every step of the way. The problem with Sandy Bridge is the enormous clock speed increments every time you push it further. So, if your board has a ton of vdroop, loadline is preventing it from dipping to low.

That 1.42v is really high for these chips. I know you like that 4.8ghz, but you are so much safe at 4.6 and something like 1.374v...just my 2 cents.

Randomflip - i have internal PLL voltage disabled and also PLL voltage I have reduced down to 1.7250. That helped alot with temps and stability.

EDIT - Prime is still running like a champ so I'm just going to try 4.6 at the same settings :)


Thanks I could probably drop it by setting LLC to level 2 but im not sure what that'll do for the chip itself. This is kind of ridicolous though since I only need 1.315vcore for 4.5ghz to boot and bench
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Here's a question. So I have my LLC set to Ultra High which means the voltage is still deviating a tiny little bit from what I set in the bios when loaded. Are there any negative effects other than added heat to setting my LLC at Extreme? Would it affect anything other than the volts passing through the CPU or any adverse affects to other parts such as the PSU?
 
Joined
Feb 19, 2007
Messages
12,453 (2.00/day)
Location
Yankee lost in the Mountains of East TN
Processor 5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory 32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s) Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s) Acer 1080p 22"/ (3) Samsung 22" 1080p
Case (2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse Generic Black wireless (5)
Keyboard Generic Black wireless (5)
Software Win 10/Ubuntu
Here's a question. So I have my LLC set to Ultra High which means the voltage is still deviating a tiny little bit from what I set in the bios when loaded. Are there any negative effects other than added heat to setting my LLC at Extreme? Would it affect anything other than the volts passing through the CPU or any adverse affects to other parts such as the PSU?

There is no adverse affects from small spikes in voltage, however ultra high may give you to much, and heat the the chip for no good reason. Remember, you only want the voltage as high as it needs to be and no higher. I wouldn't set it beyond medium...if medium is basically eliminating vdroop. That is all LLC is designed to do.
 
Joined
Oct 19, 2008
Messages
3,158 (0.56/day)
System Name White Theme
Processor Intel 12700K CPU
Motherboard ASUS STRIX Z690-A D4
Cooling Lian Li Galahad Uni w/ AL120 Fans
Memory 32GB DDR4-3200 Corsair Vengeance
Video Card(s) Gigabyte Aero 4080 Super 16GB
Storage 2TB Samsung 980 Pro PCIE 4.0
Display(s) Alienware 38" 3840x1600 (165Hz)
Case Lian Li O11 Dynamic EVO White
Audio Device(s) 2i2 Scarlett Solo + Schiit Magni 3 AMP
Power Supply Corsair HX 1000 Platinum
This is odd.. I get the 0x124 error randomly when I'm just doing things on the desktop although it seldom happens. Whats whack is that I can pass 25 LinX runs with 0 errors, could I be pushing my PSU too hard? I mean to be quite honest I don't think 750watts is enough for 2x 6970's, 5x HDDs, 6x 120mm fans, 1x 200mm fan and an i5 clocked at 4.5ghz plus 1x cathode light ..
 
Joined
Oct 12, 2008
Messages
168 (0.03/day)
Location
Slovenia
System Name Sata Buster
Processor i5 6600K@4.6GHz 1.250Vcore
Motherboard MSI Z170A-M3
Cooling Noctua NH-D14
Memory Kingston HyperX Fury 2x4GB DDR4 2133MHz
Video Card(s) MSI GTX 980Ti OC TwinFrozr
Storage Intel 330 240GB SSD + WD 1TB RE4
Display(s) Asus P279q
Case Fractal R3
Audio Device(s) Int. Realtek - Yamaha RXV596 - Sennheiser HD280
Power Supply CoolerMaster V850
Software Win7 64bit
Hey guys,

I currently have my i5 at 45x multi / 13000vcore / 1.100 vtt qpi

when I put a 47x+ multi my computer boots but the clocks reset automatically, is this because my PSU doesn't have enough power? It's the same when I try to overclock my RAM, currently its at 1333mhz when I put it to 1600mhz all the clocks reset, it's bugging the hell outta me.

EDIT: RAM is okay now for some reason after I updated my BIOS to F6, still can't reach 5ghz though.

Try F6a bios. I will give you CPU PLL option, enable it and you will probably get 4.9GHz with 1.300ish volts on CPU.
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Thanks for that Zenith, I don't seem to have as good a chip as Paulie had but I'm trying to tweak the hell out of it for the very best voltage/temps combination:) After reading what you put I raised my CPU PLL to 1.78 which has now enable a 4.7GHz overclock, extreme LLC, which gives me an idle core voltage of 1.34v and loads at 1.38v. Max temps were 70c after an hr and a half and proved to be stable for that time. I have gamed for a bit today and no issues whatsoever.
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
Looks like this 2500k is a winner,
5GHZ // 1.38Vcore // LLC L3 //PLL overvoltage enabled//
temps maxed around 71C before I opened the case then they dropped off around 6C lol.

 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
Very nice now print screens of your whole bios :)
 
Joined
Oct 12, 2008
Messages
168 (0.03/day)
Location
Slovenia
System Name Sata Buster
Processor i5 6600K@4.6GHz 1.250Vcore
Motherboard MSI Z170A-M3
Cooling Noctua NH-D14
Memory Kingston HyperX Fury 2x4GB DDR4 2133MHz
Video Card(s) MSI GTX 980Ti OC TwinFrozr
Storage Intel 330 240GB SSD + WD 1TB RE4
Display(s) Asus P279q
Case Fractal R3
Audio Device(s) Int. Realtek - Yamaha RXV596 - Sennheiser HD280
Power Supply CoolerMaster V850
Software Win7 64bit
Nice volts for 5GHz, mine wants a little bit more than 1.4V.
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
Here you go..Going to start tweaking voltage thru offset mode, hopefully I will be able to lower volts somehow. Still have to fine tune settings (hopefully lower some).





Edit: figured out why bclk was wavering below 100, didnt disable Spread spectrum. Slipped my mind :p
 
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
Joined
Jun 20, 2008
Messages
2,855 (0.50/day)
Location
Northants. UK
System Name Bad Moon Ryzen
Processor Ryzen 7 5700X
Motherboard Asrock B450M Pro4-F
Cooling Vetroo V5
Memory Crucial Ballistix 32Gb (8gb x 4) 3200 MHz DDR 4
Video Card(s) 5700 XT Temporarily
Storage Samsung 860 Evo 1Tb, Samsung 860 Evo 500Gb,WD Black 8Tb, WD Blue 2Tb
Display(s) Acer Nitro VG270bmiix & 4K Samsung TV
Case Fractal Design Meshify 2 Compact w/Dark Tempered Glass
Audio Device(s) Onboard
Power Supply MSI MPG A850GF (850w)
VR HMD Rift S
I'm just deciphering your settings now :) Does your LLC power up to what is needed or down?
 

3dsage

New Member
Joined
Nov 8, 2008
Messages
1,797 (0.32/day)
Location
NW Burbs of Chicago
System Name *5GHZ_STAR*
Processor Core i5 2500K 5GHZ 24/7 1.38Vcore
Motherboard Asrock P67 Extreme6
Cooling Scythe SCMG-2100 REV. B
Memory 2x2GB GSkill Ripjaw X 1600 CL7
Video Card(s) 4850 XFIRE
Storage 500GB + 1TB NAS
Display(s) I-INC 28" LCD 1920x1200
Case Antec P180
Power Supply Thermaltake TR2 TRX-650
Software Seven Ultimate 64-bit
What I know about this board and my chip , is that llc L1 is a no no..llc L2 gives me Bsod's.. seems like L3 is the sweet spot.

I believe it powers it downward..
 
Top