saadzaman126
New Member
- Joined
- Apr 16, 2008
- Messages
- 415 (0.07/day)
- Location
- Ontario, Canada
System Name | Cyclone |
---|---|
Processor | AMD Athlon II X4 640 |
Motherboard | MSI 870 G45 |
Cooling | Cooler Master Hyper 212+, Terminator 3 80mm LED, and 120mm Front LED |
Memory | Kingston HyperX Genesis 4gb DDR3-1600 |
Video Card(s) | Zotac 1Gb GTS 250 |
Storage | Seagate Barracuda SATA2 7200RPM 500gb |
Display(s) | LG Flatron 19" LCD |
Case | Aerocool Jetmaster Jr. |
Audio Device(s) | Onboard |
Power Supply | OCZ ModXStream Pro 500W |
Software | Win 7 Ultimate 64 bit |
Hey, sorry to bug you just I'm having an assembly issue right now, and idk who else to turn to but the geniuses of TPU So here's the thing, I have an AeroCool Jetmaster Jr. Case. and as you can see from the pictures below there are bumps in it.
These bumps are where the risers for an ATX mobo go. However, if I place risers on top of the bumps, My mobo (MSI 870-G45) doesn't line up with the I/O panel. :/. The case does come with risers, so I suppose I'm suppose to use em? but idk how. If i leave the risers out, my mobo lines up perfectly... what to do?
These bumps are where the risers for an ATX mobo go. However, if I place risers on top of the bumps, My mobo (MSI 870-G45) doesn't line up with the I/O panel. :/. The case does come with risers, so I suppose I'm suppose to use em? but idk how. If i leave the risers out, my mobo lines up perfectly... what to do?