• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How To: Enable SLI on pre-i7/i5 hardware

perche

New Member
Joined
Mar 16, 2011
Messages
10 (0.00/day)
i have problem of flickering, bad performance and wrong sensor reads like Kool Aid Pack Ripper, with 270.51 and 61 drivers, but 270.28 run really good with my 2 gtx460 with 1.2 beta patch, i have to try 1,42 patch for new drivers support, its normal have more cº in sli? i have about 10 degres more in sli in the first gpu.
 
Joined
Mar 24, 2011
Messages
341 (0.07/day)
Location
Portugal
Processor Intel i7 7700k @4.5Ghz
Motherboard Asus Strix Z270E Gaming
Cooling Cooler Master Nepton 120XL
Memory Corsair Vengeance LED Red 2x8GB 3000Mhz
Video Card(s) Asus Strix GTX980TI
Storage Samsung SSD 840 EVO 250GB
Display(s) BenQ XL2411Z / Dell SE198WFP
Case NOX Hummer TG RGB
Power Supply Corsair RM850
Mouse Razer Mamba Chroma
Keyboard Razer Blackwidow Chroma
Software Windows 10 - 64bit
Yes its normal, in sli the temperature increases a bit
 

jesseleite

New Member
Joined
Apr 23, 2011
Messages
25 (0.01/day)
I know I'm going to get yelledd at for not reading all 800 pages BUT I NEED SOME HELP PLEASE!

I have crosshair IV extreme with 2 x GTX580's with the latest and greatest but the Hydra is a Fail!!! no game support.

I tried the sli hack but I get bsd. can someone help??? here is my rig

http://www.youtube.com/watch?v=ZMylrh2gDno


:respect:
 
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
I know I'm going to get yelledd at for not reading all 800 pages BUT I NEED SOME HELP PLEASE!

I have crosshair IV extreme with 2 x GTX580's with the latest and greatest but the Hydra is a Fail!!! no game support.

I tried the sli hack but I get bsd. can someone help??? here is my rig

http://www.youtube.com/watch?v=ZMylrh2gDno


:respect:

What drivers?
What version of SLiPatch?
OS?
Disabled UAC?

Help us help you! :)
 

razaice

New Member
Joined
Mar 16, 2011
Messages
37 (0.01/day)
Processor AMD Phenom II 955 3.8 ghz
Motherboard M4A78T-E
Cooling Corsair H50
Memory 8 gb 1600 mhz
Video Card(s) GTX 460 SLI
Storage 120 gb Intel 320, 1 tb Caviar Black
Display(s) 27" Samsung
Case Coolermaster HAF 922
Power Supply Corsair 650tx v2
What drivers?
What version of SLiPatch?
OS?
Disabled UAC?

Help us help you! :)

Also what antivirus? I know at least avast causes crashes or bsod or something.
 

predator88

New Member
Joined
Apr 21, 2011
Messages
11 (0.00/day)
System Name NZXT PHANTOM WHITE
Processor AMD PHENOM 2 X 4 (970) BE 4.1GHz
Motherboard ASUS MA489GTD PRO/USB3
Cooling Watercooling ECO ALC (CoolIT)
Memory G SKILL RIPJAWS 1333MHz (2 X 2)
Video Card(s) SLI GTX 460 GAINWARD GS (1024)
Storage MAXTOR 7500 (200)
Display(s) LG 22" (1080p)
Power Supply ANTEC 650W (80+)
Software WINDOWS 7 (64)
a where a patch with no problem?
 

luchoman

New Member
Joined
Nov 8, 2010
Messages
4 (0.00/day)
Thanks for suport.

Slipatch 1.42 beta is stable in windows 7 ultimate 64 bits with 2xgtx 460 1Gb EVGA in motherboard gigabyte x48 dq6 witch 270.61 drivers.The slipatch version 1.4 create flickering in the some games.. but the 1.42 version work correct
 
Joined
Apr 18, 2011
Messages
26 (0.01/day)
Thanks for suport.

Slipatch 1.42 beta is stable in windows 7 ultimate 64 bits with 2xgtx 460 1Gb EVGA in motherboard gigabyte x48 dq6 witch 270.61 drivers.The slipatch version 1.4 create flickering in the some games.. but the 1.42 version work correct
I'd play more games before saying that. 1.42 did not fix flickering in all games for me. It actually caused it. But I think the SLI patch got corrupted. I and another person here learn that it leaves some routines behind after uninstalling which causes massive flicker when trying to add another SLI patch on top.. only way to remove it we found is to swap or remove a card and reboot, making the computer do a new hardware install. This seems to delete the SLI patches completely off the system. You can now install your cards back and do a fresh SLI patch with no problems.
 
Last edited:

ahu

New Member
Joined
Mar 28, 2011
Messages
5 (0.00/day)
Many have a vested interest in the successful SLI Patching of these magnitudes faster and expensive, multi-socket server motherboards. Hopefully members who've enabled server Sli and this forums' talented Patch writers could please help resolve this for benefit of all members with sofar unpatched servers.

Also our loss that Coolmiester and handfull of members who reported successfully enabled server SLI don't or can't reply to help requests for their patching procedures.
Thanks for any help,
Jeff

Tyan S7025 Serverboard with 4x PCI-E 2.0 x16 slots,
2x 5520 Quad-core Xeon CPU's,
2x NVidia 9800 GX2 GPU's

I have the same Tyan board as you. I can happily report that after my initial problems with enabling SLI, everything is working perfectly now.

For my dual GTX 590 setup, I first had to get the latest Tyan BIOS to even be able to boot into Windows properly. After flashing BIOS, I installed driver 267.91, SLI patch version 1.2 beta and rebooted PC. Quad SLI was now selectable from the Nvidia Control Panel. I also installed EVGA SLI patch version 38, but I have no idea what it actually does.

I have to say Metro 2033 looks stunning on my system with highest settings and PhysX enabled. So thanks to anatolymik & co. for the ongoing support :respect:

BTW, it seems that a lot of the problems (most?) reported here are not directly related to SLI patch itself, but driver or system problems.
 
Joined
Apr 18, 2011
Messages
26 (0.01/day)
BTW, it seems that a lot of the problems (most?) reported here are not directly related to SLI patch itself, but driver or system problems.

That's true.

These drivers for the most part are a disaster.

Terrible flickering here too
BFBC2 -> flickering
BF2 -> no flickering, So is that an issue between drivers 270.61 and DX10/11 games only?

I don't know if this the same issue you have but Nvidia acknowledge there's a problem with this driver but blame Dice..

http://forums.nvidia.com/index.php?showtopic=198422
 
Joined
Dec 15, 2010
Messages
114 (0.02/day)
System Name Bigfoot
Processor Q6600@3.2Ghz
Motherboard P5Q Pro Turbo
Cooling Artic Cooling
Memory 4Gb GSkill DDR2 1066Mhz
Video Card(s) 2xGTX460 1Gb HyperSLI
Storage 3x500Gb
Display(s) 22'' LG/ 32'' LG
Case Nox Coolbay 25
Audio Device(s) Onboard
Power Supply Corsair TX-850W
Software Win7 64/XP 32
That's true.

These drivers for the most part are a disaster.


I don't know if this the same issue you have but Nvidia acknowledge there's a problem with this driver but blame Dice..

http://forums.nvidia.com/index.php?showtopic=198422

That issue with BFBC2 that you are poiting out is with Nvidia Surround resolution only.

The flickering issue should be adress(if we are lucky:)) in the next driver:
ManuelG@Nvidia Forums said:
The BF:BC2 flickering issue is scheduled to be addressed in the next driver release next month (R275).
 
Joined
Apr 10, 2011
Messages
11 (0.00/day)
How to SLI Patch 4x PCI-E X16 Dual\Quad CPU mobo's

I have the same Tyan board as you. I can happily report that after my initial problems with enabling SLI, everything is working perfectly now.

For my dual GTX 590 setup, I first had to get the latest Tyan BIOS to even be able to boot into Windows properly. After flashing BIOS, I installed driver 267.91, SLI patch version 1.2 beta and rebooted PC. Quad SLI was now selectable from the Nvidia Control Panel. I also installed EVGA SLI patch version 38, but I have no idea what it actually does.

I have to say Metro 2033 looks stunning on my system with highest settings and PhysX enabled. So thanks to anatolymik & co. for the ongoing support :respect:

BTW, it seems that a lot of the problems (most?) reported here are not directly related to SLI patch itself, but driver or system problems.

Thanks so much Ahu for your usual fully informative answer just seen, sorry for delayed reply. And Congrat's, That is Great! news which i'll utilize on my S7025 rig almost identical to the X8DTG-QF.
I'll also soon complete a final TYAN S4985G3NR Thunder n4250QE Quad 1207(F) NVIDIA nForce4 workstation using 8435 6-core Opteron CPU's. It's an NVIDIA nForce4 board and compatible with the SLI Patch but its an AMD Opteron mobo which i hoped you and any interested could tell me is also compatible with SLI Patching? (or Crossfire patch?)
Hopefully its possible to please let me know before Thursday Apr.28/11 since the S4985 mobo is held for me till then.
I owe you, thanks again for any help,
Jeff
 

gandulfy

New Member
Joined
Apr 19, 2011
Messages
8 (0.00/day)
So I may have found my problem but I don't understand the issue :D. Is it possible that something in the 1.42 sli patch or in the new drivers allows my cards to run hotter then before? I believe the issue here for me at least is overheating, and that somehow the performance is lowered in the old sli patch to the point that I don't overheat. I have been monitoring vid card temps after using the new nvidia drivers/sli patch and they go way way higher (10-20 degrees minimum) in the new patch/drivers. I am wondering if the only reason this setup has worked with 1.0 in my case is due to the fact that its not running at max or something. what do you think?
 

Wiz62

New Member
Joined
Apr 26, 2011
Messages
9 (0.00/day)
I know I'm going to get yelledd at for not reading all 800 pages BUT I NEED SOME HELP PLEASE!

I have crosshair IV extreme with 2 x GTX580's with the latest and greatest but the Hydra is a Fail!!! no game support.

I tried the sli hack but I get bsd. can someone help??? here is my rig

http://www.youtube.com/watch?v=ZMylrh2gDno


:respect:

you MUST uninstall the HYDRA software/driver Before installing the Sli patch otherwise you will get the BSOD you are speaking off.

And you are right...HYDRA is a fail! I also have the CHIV extreme and I use the sli hack for my 570's.
 

predator88

New Member
Joined
Apr 21, 2011
Messages
11 (0.00/day)
System Name NZXT PHANTOM WHITE
Processor AMD PHENOM 2 X 4 (970) BE 4.1GHz
Motherboard ASUS MA489GTD PRO/USB3
Cooling Watercooling ECO ALC (CoolIT)
Memory G SKILL RIPJAWS 1333MHz (2 X 2)
Video Card(s) SLI GTX 460 GAINWARD GS (1024)
Storage MAXTOR 7500 (200)
Display(s) LG 22" (1080p)
Power Supply ANTEC 650W (80+)
Software WINDOWS 7 (64)
hello what is the correct procedure to run my 2 x gtx 460 and my motherboard asus ma89gtd pro, I install the 270.xx drivers and then after I plug my 2nd GTX 460 with the sli bridge? then after the patch 1.42 and I reboot? I have a antec 650 watt power its 80 + enough? thank you in advance for your answers.
 

technogiant

New Member
Joined
Apr 28, 2011
Messages
27 (0.01/day)
Win7 64 bit, Q6600, X38a chipset, 2x Palit GTX460 2GB cards.

Been trying various drivers and patch versions over recent days but now finally the latest driver 270...something and sli beta patch 1.4

With every combination I was finding an imbalance in the gpu temperatures as displayed in msi afterburrner.

This was cured by swapping the cards around after sli patch instal as another contributor suggested.

So do a clean driver instal with cards in sli and restart.

Install and update sli patch, turn off computer and swap around graphics cards.

restart.

This has given me balanced temperature ....only about 2 to 3 degrees difference rather than about 10 degrees difference as I was getting before.
 
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
hello what is the correct procedure to run my 2 x gtx 460 and my motherboard asus ma89gtd pro, I install the 270.xx drivers and then after I plug my 2nd GTX 460 with the sli bridge? then after the patch 1.42 and I reboot? I have a antec 650 watt power its 80 + enough? thank you in advance for your answers.

Disable UAC if on Vista/7
Reboot
Download SLiPatch
Install SLiPatch
power down system
install second card
turn on system
let it install second card
power down
install SLi bridge
Power up system
Set SLi in nvidia control panel.
 

technogiant

New Member
Joined
Apr 28, 2011
Messages
27 (0.01/day)
What is the purpose of the "update" in the sli patch and at which point in the installation should that be done?
 
Last edited:
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
What is the purpose of the "update" in the sli patch and at which point in the installation should that be done?

I've always just installed over previous versions of the SLiPatch.

or are you talking about the new auto patcher for the nvidia drivers?
 

technogiant

New Member
Joined
Apr 28, 2011
Messages
27 (0.01/day)
I mean the "update" button that appears in the sli patch after you have installed it.
I've always just clicked it once I've installed the patch.

I'm not sure what it does or if that is the correct point in the procedure to do it......does it update the patch software, update the master boot record with the new sli option? just don't know.
 
Last edited:
Joined
Dec 15, 2010
Messages
114 (0.02/day)
System Name Bigfoot
Processor Q6600@3.2Ghz
Motherboard P5Q Pro Turbo
Cooling Artic Cooling
Memory 4Gb GSkill DDR2 1066Mhz
Video Card(s) 2xGTX460 1Gb HyperSLI
Storage 3x500Gb
Display(s) 22'' LG/ 32'' LG
Case Nox Coolbay 25
Audio Device(s) Onboard
Power Supply Corsair TX-850W
Software Win7 64/XP 32
I mean the "update" button that appears in the sli patch after you have installed it.
I've always just clicked it once I've installed the patch.

I'm not sure what it does or if that is the correct point in the procedure to do it......does it update the patch software, update the master boot record with the new sli option? just don't know.

The update button appears because Sli Patch detects that is already a version installed, nothing more.

You don't need to click update after you install the first time.
 
Joined
Apr 29, 2011
Messages
9 (0.00/day)
Location
Sweden Göteborg
System Name Gaming/HC
Processor Q8400 @ 3,2GHz
Motherboard Asus P5Q-PRO
Cooling Stock
Memory 4GB Kingston HyperX 1066MHz
Video Card(s) 2xGTX460
Display(s) 77" 1080p Projector
Case Antec Sonata
Audio Device(s) GTX460 HDMI
Power Supply Antec True Power New 750w
Disable UAC if on Vista/7
Reboot
Download SLiPatch
Install SLiPatch
power down system
install second card
turn on system
let it install second card
power down
install SLi bridge
Power up system
Set SLi in nvidia control panel.

I followed this procedure 2 times and my Nvidia Controlpanel is still telling me to install my SLI-bridge, cant enable SLI at all but can use both cards for PhysX and view both in GPU-Z and MSI Afterburner.
I have a Asus P5Q-Pro and two GTX460.
It was a while since I used my SLI bridge but it has been safe in a box since last time and i cant find any damage on it.
Does anyone know a solution or maybe been trough the same problem?
 

DroneHive

New Member
Joined
Nov 12, 2010
Messages
17 (0.00/day)
System Name furnace
Processor Xeon X5680 @ 3.33 Ghz x 2
Motherboard Supermicro X8DTG-QF
Cooling Air
Memory 24.0 GB
Video Card(s) 2 x 480 GTX, 1 X Quadro 4000
Storage WD RE3 1TB SATA2 + WD Green 1.5TB
Display(s) 2 x Dell 2408WFP
Case Supermicro SC747TQ-R1400B
Audio Device(s) Onboard Intel HD
Power Supply 2 x 1400W
Software Debian Squeeze & Windows 7 Pro
I have the same Tyan board as you. I can happily report that after my initial problems with enabling SLI, everything is working perfectly now.

For my dual GTX 590 setup, I first had to get the latest Tyan BIOS to even be able to boot into Windows properly. After flashing BIOS, I installed driver 267.91, SLI patch version 1.2 beta and rebooted PC. Quad SLI was now selectable from the Nvidia Control Panel. I also installed EVGA SLI patch version 38, but I have no idea what it actually does.

I have to say Metro 2033 looks stunning on my system with highest settings and PhysX enabled. So thanks to anatolymik & co. for the ongoing support :respect:

BTW, it seems that a lot of the problems (most?) reported here are not directly related to SLI patch itself, but driver or system problems.

Ah good to know. I got time to install 1.42 with drivers 270.61 on my Supermicro X8DTG-QF and dual 480 but getting a BSOD at windows start currently.

Without patch both cards are seen and working ok (using one for each display until I can get SLI working).
 

technogiant

New Member
Joined
Apr 28, 2011
Messages
27 (0.01/day)
I'm wondering if any of you guys that are getting problems have your OS installed on a raid config.

I have my OS on a raid0 of 2x ssds

I had to do a OS reinstall with both cards and sli bridge in place to get this to work.
 
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
I followed this procedure 2 times and my Nvidia Controlpanel is still telling me to install my SLI-bridge, cant enable SLI at all but can use both cards for PhysX and view both in GPU-Z and MSI Afterburner.
I have a Asus P5Q-Pro and two GTX460.
It was a while since I used my SLI bridge but it has been safe in a box since last time and i cant find any damage on it.
Does anyone know a solution or maybe been trough the same problem?

Sounds like your SLi bridge is bad, or possibly the SLi "fingers" on the cards.
 
Top