de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 8,782 (1.74/day)
- Location
- Stuck in a PC. halp.
| System Name | Monke | Work Thinkpad| Old Monke |
|---|---|
| Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
| Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
| Cooling | 240mm Rad | Not needed | hyper 212 EVO |
| Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
| Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
| Storage | Samsung 980 nvme (Primary) | some samsung SSD |
| Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
| Case | Ant Esports Tempered case | Thinkpad | Antec |
| Audio Device(s) | Logitech Z333 | Jabra corpo stuff |
| Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
| Mouse | Logitech G400 | nipple |
| Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
| VR HMD | ;_; |
| Software | Windows 10 Professional x3 |
| Benchmark Scores | There are no marks on my bench |
so finally, after an upgrade to the Nokia C6-00 from the Nokia 1100, i now hold the power of taking awesome pics!
You all remember my poor little case that i started modding when i was 17? Well, its time to professionalize it now
This is what was done before hand:
the aluminium sheet was the only thing done to it physically. lights were added ofcourse but thats no biggie.
here is the original case. i had the 7th bezel from the top.
One more thing. This Mod has been done with VERY little money. So far money spent = Rs 400 ($10)
Here is what i plan on doing.
1. Cover up the acer logo on the side panel with putty M-Seal
2. Cut a hole in the bottom of the front bezel for better aeration.
3. Remove the paint of the front bezel.
4. Cut out side panel for a window.
5. Beautify front bezel with some snazzy lights.
6. Fill the hole in the front bezel with some meshing or grill.
7. Make or get a fan controller.
8. Make a overall master circuit for all the controllers.
So Far:-
Epoxied the aluminium cut out to the case. Filled and smoothed out the joints. "ace" filled and smoothed out.
Bezel hole completed. Its been masked up to prevent scuffing.
some ideas for the front grill:-
made with 5mm and 3mm slots.
You all remember my poor little case that i started modding when i was 17? Well, its time to professionalize it now
This is what was done before hand:
the aluminium sheet was the only thing done to it physically. lights were added ofcourse but thats no biggie.
here is the original case. i had the 7th bezel from the top.
One more thing. This Mod has been done with VERY little money. So far money spent = Rs 400 ($10)
Here is what i plan on doing.
1. Cover up the acer logo on the side panel with putty M-Seal
2. Cut a hole in the bottom of the front bezel for better aeration.
3. Remove the paint of the front bezel.
4. Cut out side panel for a window.
5. Beautify front bezel with some snazzy lights.
6. Fill the hole in the front bezel with some meshing or grill.
7. Make or get a fan controller.
8. Make a overall master circuit for all the controllers.
So Far:-
Epoxied the aluminium cut out to the case. Filled and smoothed out the joints. "ace" filled and smoothed out.
Bezel hole completed. Its been masked up to prevent scuffing.
some ideas for the front grill:-
made with 5mm and 3mm slots.
Last edited:
