Oc Ram to 1866

[marcosamerio]

Hi all, i have this memories:

http://www.gskill.com/products.php?index=355 (F3-12800CL9D-8GBXL)

And mi motherboard is this one:

http://www.gigabyte.us/products/product-page.aspx?pid=3910#ov (Bios F4)

¿Wich setting i must change apart from increasing the voltage and mantein the same latency

(9-9-9-24-2N), to reach 1866 mhz? ¿this is possible?

Bye all and thanks

 

[erocker]

latency

(9-9-9-24-2N), to reach 1866 mhz? ¿this is possible?

Bye all and thanks

Nope! Perhaps 9-10-9-27 or 9-11-9-28 will work and if those RipjawX's use the same IC's as my Snipers you will most likely have to go to 10-10-10 while utilizing stock voltage.

 

[marcosamerio]

Nope! Perhaps 9-10-9-27 or 9-11-9-28 will work and if those RipjawX's use the same IC's as my Snipers you will most likely have to go to 10-10-10 while utilizing stock voltage.

Hi, thanks a lot for answering me so quickly, ¿u said to increase to 9-10-9-27 2N to reach

1866? ¿and voltage?, i see the same memories but in version 1866 and put 1.6v.

http://www.gskill.com/products.php?index=362 (the memories i see)

Bye

 

[erocker]

Hi, thanks a lot for answering me so quickly, ¿u said to increase to 9-10-9-27 2N to reach 1866? and voltage? i see the same memories but in version 1866 to put 1.6

Bye

Yeah, give 1.6v a try. If it actually boots, it may work with a little more tweaking.

 

[marcosamerio]

Yeah, give 1.6v a try. If it actually boots, it may work with a little more tweaking.

Hi again, u are fast ¿what other tweak u said?

Bye and thanks again

 

[erocker]

First you need to see if it will work.

 

[marcosamerio]

First you need to see if it will work.

Hi

I put this TCL 9 TRCD 9 TRP 9 TRAS 27 TRC 36 TRFC 128 CMD 2N and 1.6 voltage and

boot perfect on windows, now im running memtest to see if is stable, ¿what other things

u recommend me to tweak or is enought with that setting i change?

Bye and thanks for the help and tips

 

[erocker]

Hi

I put this TCL 9 TRCD 9 TRP 9 TRAS 27 TRC 36 TRFC 128 CMD 2N and 1.6 voltage and

boot perfect on windows, now im running memtest to see if is stable, ¿what other things

u recommend me to tweak or is enought with that setting i change?

Bye and thanks for the help and tips

Well that's excellent! Now, test for stability using MemTest or Intel Burn Test (high memory). If it passes, you could try lowering the TRFC to 118 and possibly the CMD to 1N. Then test for stability again.

Cheers!

 

[marcosamerio]

Well that's excellent! Now, test for stability using MemTest or Intel Burn Test (high memory). If it passes, you could try lowering the TRFC to 118 and possibly the CMD to 1N. Then test for stability again.

Cheers!

No luck at 1866 , best i get with passing 2 times memtest+ was 1600 mhz @

8-8-8-24-32-128-2N-1.5v, happy with this.

Bye and thanks for all