• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Any way to fix this 8800gt?

Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
I changed to cooler on an 8800gt and when I plugged it back in it came up with lines on the screen and lots of symbols in squares followed by a lock-up. I had a look and some of the thermal paste had gone on some of the connectors however I used ic diamond which is supposed to be non conductive. Has the thermal paste problem broken it and is it fixable?
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.23/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
Im going to state the obvious and say remove all the TIM and reapply...

Adding to this post; depending on the cooler used it is possible that putting the cooler on too tight will cause damage also. A reseat & reapply should do.
 
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
Ok i've tried both of those suggestions and it hasn't worked. Any others?
 
Joined
Aug 2, 2011
Messages
1,448 (0.31/day)
Processor Ryzen 9 7950X3D
Motherboard MSI X670E MPG Carbon Wifi
Cooling Custom loop, 2x360mm radiator,Lian Li UNI, EK XRes140,EK Velocity2
Memory 2x16GB G.Skill DDR5-6400 @ 6400MHz C32
Video Card(s) EVGA RTX 3080 Ti FTW3 Ultra OC Scanner core +750 mem
Storage MP600 2TB,960 EVO 1TB,XPG SX8200 Pro 1TB,Micron 1100 2TB,OCZ Vector 512GB,1.5TB Caviar Green
Display(s) Acer X34S, Acer XB270HU
Case LianLi O11 Dynamic White
Audio Device(s) Logitech G-Pro X Wireless
Power Supply EVGA P3 1200W
Mouse Logitech G502 Lightspeed
Keyboard Logitech G512 Carbon w/ GX Brown
VR HMD HP Reverb G2 (V2)
Software Win 11
Ok i've tried both of those suggestions and it hasn't worked. Any others?

Well known issue with G92 cards.

You'll need to bake it (yes, as in putting it in the oven.) Do some google searches, there's plenty of threads out there detailing the process needed to fix the issue.
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
If it worked with the stock cooler, the aftermarket cooler isn't being installed correctly. Check to see if the cooler is touching any componentry on the card. Also make sure it's not on too tight. What cooler are you using?
 
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
If it worked with the stock cooler, the aftermarket cooler isn't being installed correctly. Check to see if the cooler is touching any componentry on the card. Also make sure it's not on too tight. What cooler are you using?

I'm actually putting the stock cooler back on as i'm using the vortex neo that was on the gt on another card. I've tried fitting it in without the cooler too as it's not going to overheat in the 10 secs the pc is on for.

Well known issue with G92 cards.

You'll need to bake it (yes, as in putting it in the oven.) Do some google searches, there's plenty of threads out there detailing the process needed to fix the issue.

I've heard of that and i'll give it a try later.
 
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
Yup, broken. You could try baking it but don't keep your hopes up that it will fix it.

It's in the oven now i'll report back in 1hr after it's cooled down.

EDIT: So the plan is leave it in the oven for 10 mins, turn off over, let it sit in the oven for 30 mins then take it out and let it cool for 1hr or so before testing it out.
 
Joined
Jan 7, 2008
Messages
3,924 (0.66/day)
System Name Main / Home Media Serever
Processor Intel i5 2500k @ 4.75ghz / AMD AM3 5200+ x2
Motherboard ASRock Fatal1ty P67 Performance / Biostar 790GX
Cooling Xigmatek Dark Knight / XIGMATEK Apache
Memory 12gb of G.Skill Value Series DDR3 / 4x 1gb DDR2
Video Card(s) XFX Radeon 6870 1gb / Asus Radeon 5450 512mb
Storage 2x Samsung 830 64gb SSD Raid 0 & 750gb WD Blue HDD / OCZ Vertex II 80GB & 10TB of HDD Space
Display(s) 2x Acer 24" LED / Samsung 50" LED
Case Xigmatek Asgard II / APEX PC-389-C
Power Supply Rosewill 750w / Antec EArthwatts 380w
Software Windows 7 Professional x64 SP1 / Ubuntu 14.04
haha cant wait to see if this works or not. Hope it does though for your sake.
 
Joined
Aug 2, 2011
Messages
1,448 (0.31/day)
Processor Ryzen 9 7950X3D
Motherboard MSI X670E MPG Carbon Wifi
Cooling Custom loop, 2x360mm radiator,Lian Li UNI, EK XRes140,EK Velocity2
Memory 2x16GB G.Skill DDR5-6400 @ 6400MHz C32
Video Card(s) EVGA RTX 3080 Ti FTW3 Ultra OC Scanner core +750 mem
Storage MP600 2TB,960 EVO 1TB,XPG SX8200 Pro 1TB,Micron 1100 2TB,OCZ Vector 512GB,1.5TB Caviar Green
Display(s) Acer X34S, Acer XB270HU
Case LianLi O11 Dynamic White
Audio Device(s) Logitech G-Pro X Wireless
Power Supply EVGA P3 1200W
Mouse Logitech G502 Lightspeed
Keyboard Logitech G512 Carbon w/ GX Brown
VR HMD HP Reverb G2 (V2)
Software Win 11
390*F - 400*F, 10 minutes, pull out of oven and let sit for a while (at least an hour).
 
Joined
Jul 21, 2008
Messages
5,169 (0.90/day)
System Name [Daily Driver]
Processor [Ryzen 7 5800X3D]
Motherboard [Asus TUF GAMING X570-PLUS]
Cooling [be quiet! Dark Rock Slim]
Memory [64GB Corsair Vengeance LPX 3600MHz (16GBx4)]
Video Card(s) [PNY RTX 3070Ti XLR8]
Storage [1TB SN850 NVMe, 4TB 990 Pro NVMe, 2TB 870 EVO SSD, 2TB SA510 SSD]
Display(s) [2x 27" HP X27q at 1440p]
Case [Fractal Meshify-C]
Audio Device(s) [Steelseries Arctis Pro]
Power Supply [CORSAIR RMx 1000]
Mouse [Logitech G Pro Wireless]
Keyboard [Logitech G512 Carbon (GX-Brown)]
Software [Windows 11 64-Bit]
Bonus points for cooking a hot pocket while cooking your video card
 
Joined
Oct 29, 2009
Messages
2,666 (0.51/day)
System Name Old Gateway / Steam Deck OLED LE
Processor i5 4440 3.1ghz / Jupiter 4c 8t
Motherboard Gateway / Valve
Cooling Eh it doesn't thermal throttle
Memory 2x 8GB JEDEC 1600mhz DDR3 / 16gb DDR5 6400
Video Card(s) RX 560D 4GB / Navi II 8CU
Storage 240gb 2.5 SSD / 1TB nvme
Display(s) Dell @ 1280*1024 75hz / 800p OLED
Case Gateway / Valve LE
Audio Device(s) Gateway Diamond Audio EMC2.0-USB 5375U ($15 a long ass time ago), Valve
Power Supply 380w oem / 65w valve USB-C
Mouse Purple Walmart special, 1600dpi. Black desk mat
Keyboard SteelSeries Apex 100 / virtual
VR HMD Lmao
Software Windows 10 / Steam OS
Benchmark Scores It can run Crysis (Original), Doom 2016, and Halo MCC. SD LE 45fps
390*F - 400*F, 10 minutes, pull out of oven and let sit for a while (at least an hour).

It worked for mine.

btw, when baking remove everything such as fans, heatsinks, etc, from the card and clean any thermal grease from the gpu. also make sure the card is level and the gpu is facing up... i've seen ppl have their gpus drop off b/c they put it face down.
 
Joined
Sep 4, 2008
Messages
875 (0.15/day)
I must agree again - I had a heavily overclocked 8800GTS - that was a REAL TROOPER - ran like a demon for almost 2 years (and I mean almost 60% overclocked) before it developed this problem.

I then Baked it at 210c for 10 minutes - and it worked just fine again!

So I overclocked it again... and it broke again... So I baked it AGAIN!

And blow me down if that didn't fix it a SECOND time! XD

Anyway it sounds crazy - but yeah baking them in an oven actually COULD fix that error on those cards - but find and read a GOOD tutorial on exactly how - if you do it wrong you can totally destroy the card - and give it a LONG LONG LONG time to cool down - many people just opened the oven door and whipped it out as the timer was done and the card warped horribly (and obviously destroyed itself) from the different components cooling at different speeds. (Yes I KNOW this didn't happen to everyone but lets all realize that the average ambient room temperature varies GREATLY around the world and not everyone lives in the same country :)

Once you have finished your bake - just turn the oven off - crack the oven door open a little bit and let it cool down nice and slowly.

Also if you have changed the STOCK cooling system - do some extra research - I believe part of how this method worked was something to do with the stock cooler pressing the chips onto the board and the heat re-soldering the contacts under the chips - one would remove all the PLASTIC from the card - but leave the metalwork of the cooler in place.

I heard of a guy who baked his with the metalwork removed, and his chips fell off the board when the solder melted - obviously this is a non-recoverable fault.

EDIT : xBruce88x : Yeah - I got here just before your post - but yep - that's why the tutorials I read said that if you have the stock factory cooler rather leave the actual heat sink ON and just remove all the plastic work, as the actual heat sink acts like a vice holding all the chips in place - And oddly enough all that heat seemed to improve my thermal bonds as the card actually ran 8c cooler on average after the first bake :)
 
Last edited:
Joined
Mar 18, 2008
Messages
5,398 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
Joined
Jul 8, 2010
Messages
1,190 (0.24/day)
System Name Titan
Processor AMD FX-8350 4.6ghz
Motherboard AsRock 990FX Fatal1ty Professional
Cooling Corsair H100
Memory G.Skill RipjawsX 8gb
Video Card(s) XFX Double D 7970 3gb
Storage Western Digital Green 2TB 64mb Cache/ Western Digital 500gb
Display(s) iMac Display 2560 x 1440
Case NZXT Switch 810 White
Audio Device(s) Creative Sound Blaster Z
Power Supply Corsair AX1200
Software Windows 7 64-bit
Now remember fellas when baking...
 
Last edited by a moderator:
Joined
Sep 9, 2009
Messages
1,168 (0.22/day)
Location
Austria, Europe
System Name Bang4Buck
Processor AMD Ryzen 9 5900x
Motherboard MSI PRESTIGE x570 CREATION
Cooling Fractal Design Celsius S36
Memory 32Gb 4400Mhz Patriot Viper Steel(Samsung B-die) @ 3800Mhz 16-16-16-32-48-1T @ 1.38v
Video Card(s) MSI RTX 3080 Ti Suprim X
Storage Adata SX8200Pro 512Gb/2x Crucial P1 1Tb/Samsung 840 EVO/6Tb Raid -HGST Enterprise/2x IronWolf 8Tb/
Display(s) Samsung UE49KS8002 4K HDR TV (US - 9 series)
Case Fractal Design Define R6 Black Usb-C
Audio Device(s) HDMI out to Denon X4400H reciever, 2x Dali Zensor 7, Dali Zensor Vokal, 2x Dali Zensor 1, Yamaha Sub
Power Supply Seasonic Prime Ultra 750W
Mouse Logitech G305 Lightspeed
Keyboard Logitech K520
Software Windows 11 Pro x64
Benchmark Scores https://www.3dmark.com/spy/26216445
Yeah, bake it. It works 100%. I saved a 8800GTX, a 8800GTS 512, and a 8800GT that way. Sold them all, and they still work today. Around 200°C 8-9min, then take out of the owen, dont leave it in. Let it rest till it cools down. Stick it in, and let it rock.

Oh, and pre-heat the owen.
 
Joined
Jun 12, 2007
Messages
4,815 (0.78/day)
Location
Wangas, New Zealand
System Name Darth Obsidious
Processor Intel i5 2500K
Motherboard ASUS P8Z68-V/Gen3
Cooling Cooler Master Hyper 212+ in Push Pull
Memory 2X4GB Corsair Vengeance DDR3 1600
Video Card(s) ASUS R9 270x TOP
Storage 128GB Samsung 830 SSD, 1TB WD Black, 2TB WD Green
Display(s) LG IPS234V-PN
Case Corsair Obsidian 650D
Audio Device(s) Infrasonic Quartet
Power Supply Corsair HX650w
Software Windows 7 64bit and Windows XP Home
Benchmark Scores 2cm mark on bench with a razor blade.
This thread is making me hungry.

Good luck with baking ti just right!
 
Joined
Apr 8, 2008
Messages
1,034 (0.18/day)
Location
Scotland
Processor Phenom II X4 B50 @ 3.4Ghz
Motherboard Gigabyte GA MA790XT-UD4P
Cooling Vendetta 2, several case fans
Memory 8GB Geil Ripjaws 1666Mhz
Video Card(s) Powercolor 5850 1GB
Storage 1TB Samsung F1
Display(s) LG 23" W2361V TFT Widescreen
Case Antec 300
Audio Device(s) X-Fi Xtreme Music
Power Supply Antec HCG 750W
Software Windows 7 Pro 64bit
Guess I didn't read up right before putting it in the oven. I just had a quick look at a video on youtube and the guy had it gpu facing down so I copied that 200C for 9 mins and when I took it out 2 bits had fallen off of it lol. I'll try and solder them back on if I can get a soldering iron.
 
Joined
Jun 12, 2007
Messages
4,815 (0.78/day)
Location
Wangas, New Zealand
System Name Darth Obsidious
Processor Intel i5 2500K
Motherboard ASUS P8Z68-V/Gen3
Cooling Cooler Master Hyper 212+ in Push Pull
Memory 2X4GB Corsair Vengeance DDR3 1600
Video Card(s) ASUS R9 270x TOP
Storage 128GB Samsung 830 SSD, 1TB WD Black, 2TB WD Green
Display(s) LG IPS234V-PN
Case Corsair Obsidian 650D
Audio Device(s) Infrasonic Quartet
Power Supply Corsair HX650w
Software Windows 7 64bit and Windows XP Home
Benchmark Scores 2cm mark on bench with a razor blade.
Oh damn.

Live an learn.
Best of luck.
 
Joined
Aug 2, 2011
Messages
1,448 (0.31/day)
Processor Ryzen 9 7950X3D
Motherboard MSI X670E MPG Carbon Wifi
Cooling Custom loop, 2x360mm radiator,Lian Li UNI, EK XRes140,EK Velocity2
Memory 2x16GB G.Skill DDR5-6400 @ 6400MHz C32
Video Card(s) EVGA RTX 3080 Ti FTW3 Ultra OC Scanner core +750 mem
Storage MP600 2TB,960 EVO 1TB,XPG SX8200 Pro 1TB,Micron 1100 2TB,OCZ Vector 512GB,1.5TB Caviar Green
Display(s) Acer X34S, Acer XB270HU
Case LianLi O11 Dynamic White
Audio Device(s) Logitech G-Pro X Wireless
Power Supply EVGA P3 1200W
Mouse Logitech G502 Lightspeed
Keyboard Logitech G512 Carbon w/ GX Brown
VR HMD HP Reverb G2 (V2)
Software Win 11
Yeah, ALWAYS bake with the GPU UP!. Otherwise you will follow this issue, bake too long and when the solder softens up gravity does it's job.
 
Top