- Joined
- Oct 28, 2011
- Messages
- 111 (0.02/day)
- Location
- Pensacola, Fl
System Name | Intel |
---|---|
Processor | Intel core i5 |
Motherboard | Intel DH57DD |
Memory | 2-2gb kingston DDR3-1333/PC-10600 SDRAM |
Video Card(s) | NVIDIA GeForce 9500 GT ( 1GB DDR 2 ) |
Storage | Western Digital SATA/ 32MB Cache (WD52002AALX) 500gb |
Case | CM Storm - Scout Edition |
Audio Device(s) | unknown |
Power Supply | VisionTek 700W |
Software | Windows 7 |
People this is my issue! I have a Intel DH57DD mobo ( link to mobo layout http://www.intel.com/support/mother...914.htm?wapkw=(Intel+Desktop+Board+DH57DD)and I have a CS Storm "Scout" case. My issue is getting the wires from the front of the case to connect to the right spots on the mobo.
I have been trying to connect these wires to the "front panel header" part of the mobo. The wires are as follows "power led + power led -" "power sw" "reset sw" and "hdd led". The wires run directly from the front of the case. Each wire has a pin sized hole hence the reason for putting them in the front panel header section.
The wire colors are blue/white, orange/white, red/white, and green in white. On the mobo in the front panel header section there are 2pins sections that are blue and side by side, so I tried putting the blue/white wires there... didn't work.
I am getting power to the mobo, the rest of my mobo is wired correctly. Guys, help please! I have tried all sorts of combos and am getting nowhere.
thanks in advance
I have been trying to connect these wires to the "front panel header" part of the mobo. The wires are as follows "power led + power led -" "power sw" "reset sw" and "hdd led". The wires run directly from the front of the case. Each wire has a pin sized hole hence the reason for putting them in the front panel header section.
The wire colors are blue/white, orange/white, red/white, and green in white. On the mobo in the front panel header section there are 2pins sections that are blue and side by side, so I tried putting the blue/white wires there... didn't work.
I am getting power to the mobo, the rest of my mobo is wired correctly. Guys, help please! I have tried all sorts of combos and am getting nowhere.
thanks in advance