de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 8,783 (1.73/day)
- Location
- Stuck in a PC. halp.
System Name | Monke | Work Thinkpad| Old Monke |
---|---|
Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
Cooling | 240mm Rad | Not needed | hyper 212 EVO |
Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
Storage | Samsung 980 nvme (Primary) | some samsung SSD |
Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
Case | Ant Esports Tempered case | Thinkpad | Antec |
Audio Device(s) | Logitech Z333 | Jabra corpo stuff |
Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
Mouse | Logitech G400 | nipple |
Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
VR HMD | ;_; |
Software | Windows 10 Professional x3 |
Benchmark Scores | There are no marks on my bench |
So i got a new Corsair GS600 Power supply. First reason being i want higher overclocks. But that wasnt possible somehow...
I decided to investigate on the topic...
heres my BIOS settings:-
Ref Clock :- 270
NB Multi:- 10x
CPU MultiL- 12x
NB Voltage:- 1.45V
CPU Voltage: 1.45V
HT- 2000MHz
Now even though my CPU voltage is 1.45V when idle, it goes to as low as 1.376v when in load and 1.4 when in load. (refer to graph)
This is an RMA'd board so my prime suspect is that the mosfets are poop.
Furthermore, when i use core disabling feature and OC each core individually, i have seen core 1 and 2 can be taken to 3.9GHz stable, together, but cores 1/3 or 1/4 wont budge past 3.4ghz.
Previously on the original board i used to crunch at 3.6GHz all cores 24x7(cheap 10$ PSU)
so... can i put 1.5V on this?
I decided to investigate on the topic...
heres my BIOS settings:-
Ref Clock :- 270
NB Multi:- 10x
CPU MultiL- 12x
NB Voltage:- 1.45V
CPU Voltage: 1.45V
HT- 2000MHz
Now even though my CPU voltage is 1.45V when idle, it goes to as low as 1.376v when in load and 1.4 when in load. (refer to graph)
This is an RMA'd board so my prime suspect is that the mosfets are poop.
Furthermore, when i use core disabling feature and OC each core individually, i have seen core 1 and 2 can be taken to 3.9GHz stable, together, but cores 1/3 or 1/4 wont budge past 3.4ghz.
Previously on the original board i used to crunch at 3.6GHz all cores 24x7(cheap 10$ PSU)
so... can i put 1.5V on this?