Project: Mod in a Week // "Fallout Cause SP"

de.das.dude · Dec 2, 2011

scaminatrix said:
Man, on the first page I thought you was a complete loony, but this is starting to look pretty damn good!

lol i had thought so too.

Sinzia · Dec 2, 2011

AHH! now I get it! I thought you had no idea what you were doing.

I still wouldnt have cut the heatpipes, tho.

Luciel · Dec 2, 2011

thanks guys!

Due to overwhelming comments on the matter, I´ve gotten the spare (exactly the same) heatsink, modified the 775 adaptor so I can possition it with the pipes pointing to another area (and yet still fitting in the stablish hole on the case).

Luciel · Dec 3, 2011

7th Day - Friday 02-12-11

Assembly took longer than I thought it would but almost there, the following pictures are the process, because I had to remove the HDD cage from bellow to install the monitor´s hardware and hide cables I had to dismantle the memory card reader to take out the pcb and cut the frontal plastic part that goes with it. Once done and used silicone glue to put them togueter and again to attach it to the case (as you will see in one of the pictures), this allowed me to install the hdd where that would normally go (i.e. enough space to do so now). The cathodes are barely visible but are at the top and on the right side. Also due to popular demand, I replaced the cpu cooler with another exactly the same one, modified the 775 adaptor so I could shift it half a centimetre to right so I´d be able to rotate the cooler to a possition where the heatpipes are pointing up and down as opposed to the side so it doesn´t prevent me from installing both modules of ram:

Now I just have to mount the screen, make sure it works and I can take some sweet final pictures, all done by tomorrow at around 6-7pm gmt+1 in order to meet the one week challenge.

Thanks for reading!

de.das.dude · Dec 3, 2011

me thinks you can fit a fan under the CPU HSF fin array?

theJesus · Dec 3, 2011

I gotta agree with the others, I started reading through the first page like :wtf:

and then looked at the rest and was pleasantly surprised. It looks a lot better than I was expecting. :toast:

de.das.dude said:
me thinks you can fit a fan under the CPU HSF fin array?

I believe the point is for it to be passive.

Luciel · Dec 3, 2011

Yup, it is going to be passive, specially at expositions. For lan parties I might stick a fan on the cooler for long usage sessions.

de.das.dude · Dec 3, 2011

how did you get yellow paint on the fin array?

Luciel · Dec 3, 2011

what is the fin array?

scaminatrix · Dec 3, 2011

Nice work, it's looking good! One bit of input from me:
In this pic here, you can see how close the monitor plug is to the back of the graphics card. I would recommend wrapping a bit of electrical tape around the monitor plug, as there a lot of components on the back of a GPU that stick out slightly, and you don't want any metal from the monitor plug touching and causing problems.

de.das.dude · Dec 3, 2011

Luciel said:
what is the fin array?

heat sink fins.

Velvet Wafer · Dec 3, 2011

subbed

Luciel · Dec 3, 2011

scaminatrix said:
Nice work, it's looking good! One bit of input from me:
In this pic here, you can see how close the monitor plug is to the back of the graphics card. I would recommend wrapping a bit of electrical tape around the monitor plug, as there a lot of components on the back of a GPU that stick out slightly, and you don't want any metal from the monitor plug touching and causing problems.

http://img.techpowerup.org/111203/86.jpg

Good find, thanks for the tip! : )

de.das.dude said:
heat sink fins.

There´s no paint on the cpu cooler as nothing was painting with that in it :S

KieX · Dec 3, 2011

Saw this earlier on your facebook, good to see you in this forum! Looking great :toast:

Sub'd

de.das.dude · Dec 3, 2011

whats the yello stuff? reflection?

Luciel · Dec 3, 2011

Hey Klex, thanks : ) This was the first forum I ever joined when I started making worklogs : )

--------------------

Update:

Project is now completed however I have ran in to a problem with the mounted screen, it doesn´t seem to be getting power, I´ve checked the usual culprits to no avail and I dont currently own a voltimetre which is unconveniente. Going to dismantle the screen´s hw and test it on a wooden bench, maybe it´s shorting out. Because I want the final picks to show an image I will wait to upload them till I get this fixed between today and monday.

kciaccio · Dec 3, 2011

Looks like a flight data recorder after a plane crash. Yikes!

Luciel · Dec 3, 2011

Luciel said:
Good find, thanks for the tip! : )

There´s no paint on the cpu cooler as nothing was painting with that in it :S

Must be, double checked, no paint on the cooler :S

Update

Fixed the screen, one of the cables must´ve cought somewhere and was damaged, severing the link between the screen´s psu and the lcd panel. So I cut that section off and soldered new cable to both ends, works fine now. Took me hours of looking and trying stuff till I saw the small brake in the cable and of course later I had to put it all togueter in the case again.

Aniway, I´m knakered and now I have to go some event to be social which I don´t really feel like but promised I would so... Aniway, I will set it all up for a shoot tomorrow to get a nice gallery of final pictures.

scaminatrix · Dec 3, 2011

It looks like dust on the fin array on the angled pics, it's not paint das.

Can't wait for the pics!

HalfAHertz · Dec 3, 2011

Awesome Job!

Luciel · Dec 3, 2011

In did, it´s a bit of dust : )

Luciel · Dec 4, 2011

Final Pictures - Set 1

Hi everyone!

Right, as promised, here is a first set of the final pictures. I say first set because I´m not happy with them, light conditions, the need to use flash and reflections on the case by nearby windows, the table (that was a dumb idea) and so on, make the project look different, they make it look shiny (which is not), they distort the colors, you can barely see the green glow, etc

The point is, because I´m out of time right now I give you these just as a preview of some nicer final pictures which I will take at the modding event starting tuesday. Regardless, I hope you enjoy them : )

That´s it for now, I´m going to get it ready (install the OS, drivers, and so on, and pack it so it´s ready for tuesday. Once that´s out of the way I will start the final stage on Project: AIO AL and Project: Diabolo in the hopes of having them ready for tuesday as well.

This concludes the "Mod in a Week" challenge (for the second time, anyone remember my first one or has it been forgotten already?

) and I hope you enjoyed reading and watching as much as I did doing it.

Thanks for reading!

scaminatrix · Dec 4, 2011

That's very good work, nicely done, and thanks for sharing it with us :toast:

Maybe chuck it in the case mods section of TPU?

t_ski · Dec 4, 2011

Take pictures of it outside in the dirt. That would be a fitting background for this project.

de.das.dude · Dec 4, 2011

^ do eet!

better would be if you could go to Chernobyl LOL

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	FragBox
Processor	Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard	Asus P8Z77 WS
Cooling	Custom CPU loop
Memory	Kingston 12GB DDR3 1600
Video Card(s)	Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage	2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s)	3 Acer S232HLX2 in nvidia surround
Case	Corsair C70 White
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Software	Win 7 x64 Pro

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	Desktop\|\| Virtual Host 0
Processor	Intel Core i5 2500-K @ 4.3ghz \|\| 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard	ASUS P8Z68-V \|\| Dell PowerEdge R710 (Intel 5520 chipset)
Cooling	Corsair Hydro H100 \|\| Stock hotplug fans and passive heatsinks
Memory	4x4gb Corsair Vengeance DDR3 1600 \|\| 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s)	MSI GTX 760 Gaming Twin Frozr 4GB OC \|\| Don't know, don't care
Storage	Hitachi 7K3000 2TB \|\| 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s)	ViewSonic VA2349S \|\| remote iDRAC KVM console
Case	Antec P280 \|\| Dell PowerEdge R710
Audio Device(s)	HRT MusicStreamer II+ and Focusrite Scarlett 18i8 \|\| Don't know, don't care
Power Supply	SeaSonic X650 Gold \|\| 2x870w hot-swappable
Mouse	Logitech G500 \|\| remote iDRAC KVM console
Keyboard	Logitech G510 \|\| remote iDRAC KVM console
Software	Win7 Ultimate x64 \|\| VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores	Over 9000 on the scouter

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

Project: Mod in a Week // "Fallout Cause SP"

de.das.dude

Pro Indian Modder

Sinzia

Luciel

Luciel

de.das.dude

Pro Indian Modder

theJesus

Luciel

de.das.dude

Pro Indian Modder

Luciel

scaminatrix

de.das.dude

Pro Indian Modder

Velvet Wafer

Luciel

KieX

de.das.dude

Pro Indian Modder

Luciel

kciaccio

New Member

Luciel

scaminatrix

HalfAHertz

Luciel

Luciel

scaminatrix

t_ski

Former Staff

de.das.dude

Pro Indian Modder

System Name	Benny
Processor	Phenom II 1055t @ 3.3GHz; 300x11; 1.380v; NB 2700; HT 2400
Motherboard	ASUS Crosshair IV Formula (2002 BIOS)
Cooling	Thermalright TRUE 120 Black + 2 Xilence Red Wing PWM 120mm (push/pull) + polycarbonate fan holders
Memory	8GB GeIL Ultra 2133MHZ C9 running at 1600MHz @ 7-7-7-21 1T 1.5v
Video Card(s)	MSI Twin Frozr II GTX470 @ Stock w/CPU fan cable-tied on, as one of the GPU fans broke.
Storage	60GB OCZ Agility3 (OS);500GB WDC Grn; 1x1TB WDC Blk (Backup)
Display(s)	ASUS PA823Q
Case	Silverstone Raven 2 (all cables custom sleeved with velcro mod on side panel...)
Audio Device(s)	X-Fi (Onboard) + Harmon Kardon HK6100 amp powering JVC HA-RX700's with Zalman mic
Power Supply	Corsair HX650W
Software	Win7 Pro x64
Benchmark Scores	No benchies so making this space useful! Corsair M90, Logitech G19. Phobya FlexLight LED's (gawjus)

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Slick
Processor	Intel i5 2467M
Motherboard	Samsung Series 5 Ultrabook
Memory	8GB Corsair Value
Storage	Crucial M4 7mm 256GB
Display(s)	13"
Software	Windows 8 Pro x64

Processor	QuadCore Intel Core i7-2600K, 4433 MHz (43 x 103)
Motherboard	Asus P8Z68 DELUXE GEN 3
Cooling	Corsair H60
Memory	8 gigs DDR3 Corsair Vengeance 1600
Video Card(s)	POWER COLOR HD6870 EYEFINITY 6 EDITION 2GB
Storage	KINGSTON HYPER X 120G SSD
Display(s)	Quad set of Acer X193X's AND 2 Dell P2210 - 22"
Case	Silverstone Raven 2 WHITE LIMITED EDITION
Power Supply	NZXT HALE 750
Software	Windows 7 Ultimate 64 Bit

System Name	penguin
Processor	R7 5700G
Motherboard	Asrock B450M Pro4
Cooling	Some CM tower cooler that will fit my case
Memory	4 x 8GB Kingston HyperX Fury 2666MHz
Video Card(s)	IGP
Storage	ADATA SU800 512GB
Display(s)	27' LG
Case	Zalman
Audio Device(s)	stock
Power Supply	Seasonic SS-620GM
Software	win10

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro