dipsta
New Member
- Joined
- Aug 3, 2008
- Messages
- 269 (0.05/day)
- Location
- Yorkshire UK
| System Name | Dark Sideslayer |
|---|---|
| Processor | Core i5 2500k @5.0GHz @13.84v |
| Motherboard | ASRock Z68 Extreme4 Gen3 |
| Cooling | MCps655 Pump, XSPC Res, RC360 Rad, EK-Supreme HF Acetal+E |
| Memory | CORSAIR VENGEANCE 8GB (2X4GB) DDR3 PC3-15000C9 1866MHZ DUAL CHANNEL KIT |
| Video Card(s) | ASUS Direct CU II 1.2v 930/1360 |
| Storage | 60gb OCZ Agility 3, 40gb Kingston V Series & 2*500 sata |
| Display(s) | Samsung SyncMaster 245B plus |
| Case | COOLERMASTER RC1100 COSMOS SPORT customised |
| Audio Device(s) | Realtek THX Onboard |
| Power Supply | Coolermaster Real power 700W |
| Software | Windows 7 Ultimate 64 |
| Benchmark Scores | 3d Mark Vantage 22491, 3d Mark06 32242, PC Mark 07 5398, 3d Mark 2011 5983, PC Mark Vanatge 24541 :0 |
Hello again peeps, well as some of you will probably know, i upgraded my 5850 to a 6950 Asus Direct cu II. I have manager to unlock shaders and in fact reflash with 6970 bios of the same type card.
Now the problem is once i have overclocked the card.. And im currently sat at 1.2v 940/1400 furmark never can complete a benchmark. Sure it can at 6970 stock speed of 890/1350 at 1.175. But only once if i do two runs back to back it sometimes crashes. Now ive tried beta 12 drivers. Which seem to be a little better and gpuz shows temps on #2 and #3 getting into high 90 degrees..
It completes all futuremark benches without crashin or any artefacting at 940/1400 @1.2v
Is it just that the card isnt good mates with furmark??
Or is it that my card is a shit clocker.. Btw was identical both pre unlock and bios upgrade so it isnt those which ause the problem! Cheers big ears :0)
Now the problem is once i have overclocked the card.. And im currently sat at 1.2v 940/1400 furmark never can complete a benchmark. Sure it can at 6970 stock speed of 890/1350 at 1.175. But only once if i do two runs back to back it sometimes crashes. Now ive tried beta 12 drivers. Which seem to be a little better and gpuz shows temps on #2 and #3 getting into high 90 degrees..
It completes all futuremark benches without crashin or any artefacting at 940/1400 @1.2v
Is it just that the card isnt good mates with furmark??
Or is it that my card is a shit clocker.. Btw was identical both pre unlock and bios upgrade so it isnt those which ause the problem! Cheers big ears :0)
Last edited:
