FreedomEclipse
~Technological Technocrat~
- Joined
- Apr 20, 2007
- Messages
- 23,360 (3.76/day)
- Location
- London,UK
System Name | Codename: Icarus Mk.VI |
---|---|
Processor | Intel 8600k@Stock -- pending tuning |
Motherboard | Asus ROG Strixx Z370-F |
Cooling | CPU: BeQuiet! Dark Rock Pro 4 {1xCorsair ML120 Pro|5xML140 Pro} |
Memory | 32GB XPG Gammix D10 {2x16GB} |
Video Card(s) | ASUS Dual Radeon™ RX 6700 XT OC Edition |
Storage | Samsung 970 Evo 512GB SSD (Boot)|WD SN770 (Gaming)|2x 3TB Toshiba DT01ACA300|2x 2TB Crucial BX500 |
Display(s) | LG GP850-B |
Case | Corsair 760T (White) |
Audio Device(s) | Yamaha RX-V573|Speakers: JBL Control One|Auna 300-CN|Wharfedale Diamond SW150 |
Power Supply | Corsair AX760 |
Mouse | Logitech G900 |
Keyboard | Duckyshine Dead LED(s) III |
Software | Windows 10 Pro |
Benchmark Scores | (ノಠ益ಠ)ノ彡┻━┻ |
this is more a rant out of frustration then anything else. you can read it if you like or you can just hit backspace on your keyboard.....
--------------------
Ive owned 2 6970s for the better part of 5months. Ive not had much problems with it at all. that was until just recently....
BF3 drivers have been pretty poor at best, anything after cat 11.9's just caused my game to CTD either while loading into a game or right in the middle of a game and it wasnt until 11.12's that they finally started to behave.
But on a related note. anything after cat 11.9's broke the ARMA II crossfire profile. Expansions like Operation Arrowhead would work perfectly fine.
I suffered a serious amount of ghosting and 'artifacting' where Id see loads of spikes on screen but the spikes were ghosting and i could still see what was going on behind that but it would make playing the game a lot worse when nightvision was turned on....
ANYWAY I finally found a way to fix it by manually disabling crossfire whenever i loaded into ARMA II, but then my game would suffer from really really bad stuttering and game play wouldnt be smooth.
HOWEVER this was fixed with Cat 11.11, I was using 11.11c until last night when I started getting atikmpag.sys BSOD's like a motherf**ker when trying to load into ARMA II.
sometimes id load in fine, then other times it would BSOD or force my system to crash and restart (which is the same as a BSOD anyway) I must of had the same fricking BSOD about 10times while trying to play ARMA II yesterday. So I updated the drivers to 12.1 previews hoping that it would stop the BSODs. BUT IT DID NOTHING Im still having random BSODs when trying to load into a server. I tried to make use of the 3D profiling to disable crossfire when i play ARMA II but it just BSODs whenever I try to play the game.
Ive been patient, too patient if you ask me, but i am getting sick of this Bullsh!t and another bad thing is all these BSODs could corrupt the data on my SSD.
I dont know what to do. Either I sell off one of the cards and run with one 6970 or I sell of both and set myself up with SLI'd 570's or 580's because Im am sick of these bullshit drivers that dont seem to f**king work. Cat 11.9's never made my pc BSOD when loading into ARMA II!!! thats the funny thing about these new drivers!!!
Bad BF3 & Skyrim drivers and now this bull crap.
--------------------
Ive owned 2 6970s for the better part of 5months. Ive not had much problems with it at all. that was until just recently....
BF3 drivers have been pretty poor at best, anything after cat 11.9's just caused my game to CTD either while loading into a game or right in the middle of a game and it wasnt until 11.12's that they finally started to behave.
But on a related note. anything after cat 11.9's broke the ARMA II crossfire profile. Expansions like Operation Arrowhead would work perfectly fine.
I suffered a serious amount of ghosting and 'artifacting' where Id see loads of spikes on screen but the spikes were ghosting and i could still see what was going on behind that but it would make playing the game a lot worse when nightvision was turned on....
ANYWAY I finally found a way to fix it by manually disabling crossfire whenever i loaded into ARMA II, but then my game would suffer from really really bad stuttering and game play wouldnt be smooth.
HOWEVER this was fixed with Cat 11.11, I was using 11.11c until last night when I started getting atikmpag.sys BSOD's like a motherf**ker when trying to load into ARMA II.
sometimes id load in fine, then other times it would BSOD or force my system to crash and restart (which is the same as a BSOD anyway) I must of had the same fricking BSOD about 10times while trying to play ARMA II yesterday. So I updated the drivers to 12.1 previews hoping that it would stop the BSODs. BUT IT DID NOTHING Im still having random BSODs when trying to load into a server. I tried to make use of the 3D profiling to disable crossfire when i play ARMA II but it just BSODs whenever I try to play the game.
Ive been patient, too patient if you ask me, but i am getting sick of this Bullsh!t and another bad thing is all these BSODs could corrupt the data on my SSD.
I dont know what to do. Either I sell off one of the cards and run with one 6970 or I sell of both and set myself up with SLI'd 570's or 580's because Im am sick of these bullshit drivers that dont seem to f**king work. Cat 11.9's never made my pc BSOD when loading into ARMA II!!! thats the funny thing about these new drivers!!!
Bad BF3 & Skyrim drivers and now this bull crap.