- Joined
- Mar 19, 2012
- Messages
- 377 (0.09/day)
- Location
- Rizal, Philippines
System Name | Poor Man's Build |
---|---|
Processor | Intel i7 3960X 4.9Ghz Sandy Bridge E |
Motherboard | MSi X79A-GD65 8D |
Cooling | XSPC 240mm and 360MM (External) Rad |
Memory | 64Gb Corsair Dominator Platinum |
Video Card(s) | EVGA GTX770 SC ACX SLI (non water cooled yet) |
Storage | Intel 520 240GB SSD x2 /x2 WD Caviar Black 3TB 7200RPM 64MB Cache |
Display(s) | ASUS 27" 2560X1440 x3 |
Case | Corsair 900D (upgraded from my lvl 10 gt and 600T) |
Audio Device(s) | Asus Xonar Essence STX |
Power Supply | Corsair AX1200i 80PLUS Platinum |
Software | Windows 7 Ultimate (FPP) |
Hi finally made an account after lurking for a while here and I would like to ask for some advice. I would like to ask if there would be any problem when i Populate all 8 slots of my Mobo
Mobo: MSi X79A-GD65 (8D)
I'm Looking at the G.SKILL RIpjaws Z 16GB(4X4GB)1600Mhz CL9 ram and plan on buying 2 of them for 32GB. and I want it to run at 1600Mhz speed at specified specs. If I do populate it do I have to keep it at 1333Mhz to keep it stable?
Also if that ram is not good should I switch to kingston 32gb kit 8X4GB= 200$
This is the price for the G.SKILL Ripjaws Z16gb x2= 224$
or is it worth it adding 24$ for the G.SKILL?
I don't plan on changing it's specs above 1600, I would like to stick at 9-9-9-24 1600mhz or I don't mind going down to 1333Mhz if that keeps it stable.
I would be running it 24/7 and only let my pc rest once every 2 weeks for 10min-30min
I have everything else just need some info for which memory module between the two, for those that would recommend corsair vengeance I can't use the tall one since I have the Noctua NH-D14 SE2011 cpu cooler and the corsair vengeance low profile 16gb cost 286$
and yes some people would tell me 16gb is over kill but to the work I do I would need 32gb since it gives me 4-6gb head room as my ram usage goes over 23gb.
any help would be appriciated.
Note: only 4 choices of quad channel kits of 4 ram available, G.SKILL Ripjaws Z16gb 1600 1.5V(224$)
Corsair Vengeance 16gb 1600mhz 1.5V (253$)
Corsair Vengeance LP 16GB 1600Mhz 1.5V (286$)
Kingston HyperX 32gb 160mhz 1.65V (200$)
I'm also looking at the Reliability and Quality of the product as what those people at the store said that these are all great quality and so did some review. and of course I would Like to go as cheap as possible also one of the reason I'm looking at the G.SKILL Ripjaws Z
what are your thoughts?
Since I did Spend a huge load of money at least I want to be sure that this last piece of part I need is great
Note2: I could have gone with the ASUS Mobo but It wasn't available when I bought my Mobo but I wanted the Big Bang 2011 one but it doesn't fit the case which i have (level 10 gt)
Mobo: MSi X79A-GD65 (8D)
I'm Looking at the G.SKILL RIpjaws Z 16GB(4X4GB)1600Mhz CL9 ram and plan on buying 2 of them for 32GB. and I want it to run at 1600Mhz speed at specified specs. If I do populate it do I have to keep it at 1333Mhz to keep it stable?
Also if that ram is not good should I switch to kingston 32gb kit 8X4GB= 200$
This is the price for the G.SKILL Ripjaws Z16gb x2= 224$
or is it worth it adding 24$ for the G.SKILL?
I don't plan on changing it's specs above 1600, I would like to stick at 9-9-9-24 1600mhz or I don't mind going down to 1333Mhz if that keeps it stable.
I would be running it 24/7 and only let my pc rest once every 2 weeks for 10min-30min
I have everything else just need some info for which memory module between the two, for those that would recommend corsair vengeance I can't use the tall one since I have the Noctua NH-D14 SE2011 cpu cooler and the corsair vengeance low profile 16gb cost 286$
and yes some people would tell me 16gb is over kill but to the work I do I would need 32gb since it gives me 4-6gb head room as my ram usage goes over 23gb.
any help would be appriciated.
Note: only 4 choices of quad channel kits of 4 ram available, G.SKILL Ripjaws Z16gb 1600 1.5V(224$)
Corsair Vengeance 16gb 1600mhz 1.5V (253$)
Corsair Vengeance LP 16GB 1600Mhz 1.5V (286$)
Kingston HyperX 32gb 160mhz 1.65V (200$)
I'm also looking at the Reliability and Quality of the product as what those people at the store said that these are all great quality and so did some review. and of course I would Like to go as cheap as possible also one of the reason I'm looking at the G.SKILL Ripjaws Z
what are your thoughts?
Since I did Spend a huge load of money at least I want to be sure that this last piece of part I need is great
Note2: I could have gone with the ASUS Mobo but It wasn't available when I bought my Mobo but I wanted the Big Bang 2011 one but it doesn't fit the case which i have (level 10 gt)