caveman_1990
New Member
- Joined
- Jan 22, 2007
- Messages
- 269 (0.04/day)
- Location
- Sydney, Australia
Processor | Intel C2D E6600 [380fsb] 3.42Ghz (O.C) |
---|---|
Motherboard | ASUS Commando bios ver.1001 |
Cooling | CPU :ZALMAN CNPS9500 WATERCOOL MOD CASE:120mm LED front,2X80mm exhast |
Memory | A-DATA Vitesta DDR2 800(380mhz) with Pentium 3 HSF |
Video Card(s) | SPARKLE 7950GT DIY HSF with 2X80mm fans oc'ed(core:600 mem:1600) |
Storage | SAMSUNG SP2504C (250GB) |
Display(s) | BENQ FP71G+ 17inch |
Case | icute 0408SL series |
Power Supply | cheap ~_~"" 500w |
Software | FULL OF PORN |
Hey guys
Everytime I run orthos for like 10secend it stops but all the voltage setting is correct and if I go any higher it would be to much(vcore in BIOS 1.48). But still everything else is fine but I m wondering if 3DMARK06 can be used as a stable test program.
Everytime I run orthos for like 10secend it stops but all the voltage setting is correct and if I go any higher it would be to much(vcore in BIOS 1.48). But still everything else is fine but I m wondering if 3DMARK06 can be used as a stable test program.