- Joined
- Jan 2, 2009
- Messages
- 9,899 (1.77/day)
- Location
- Essex, England
| System Name | My pc |
|---|---|
| Processor | Ryzen 5 3600 |
| Motherboard | Asus Rog b450-f |
| Cooling | Cooler master 120mm aio |
| Memory | 16gb ddr4 3200mhz |
| Video Card(s) | MSI Ventus 3x 3070 |
| Storage | 2tb intel nvme and 2tb generic ssd |
| Display(s) | Generic dell 1080p overclocked to 75hz |
| Case | Phanteks enthoo |
| Power Supply | 650w of borderline fire hazard |
| Mouse | Some wierd Chinese vertical mouse |
| Keyboard | Generic mechanical keyboard |
| Software | Windows ten |
Hello there folks!
Got a kandalf on the way, was wondering what essential mods would you recommend.
Also what is the weakest point of the system? At a glance I'm guessing the block due to it's simple channel design.
Just wondering which bits I would need to swap over, I imagine the rad is okay, pump is okay, res is okay.
Things I have in mind thus far.
Push/pull
Change reservoir to 500ml aluminium passive heatsink type ( should be easy right?)
And thinking of maybe changing the block.
Let me know what you think guys!
I'll be adding cable management holes as well, but I do that with all cases : ]
( no paint job this time!)
Got a kandalf on the way, was wondering what essential mods would you recommend.
Also what is the weakest point of the system? At a glance I'm guessing the block due to it's simple channel design.
Just wondering which bits I would need to swap over, I imagine the rad is okay, pump is okay, res is okay.
Things I have in mind thus far.
Push/pull
Change reservoir to 500ml aluminium passive heatsink type ( should be easy right?)
And thinking of maybe changing the block.
Let me know what you think guys!
I'll be adding cable management holes as well, but I do that with all cases : ]
( no paint job this time!)
