here is the bike stripped of its engine.
Today I got the backplate to the mobo not made ​​exactly like the s.madre but one side 1cm long and after we will see why.
or take a piece of sheet thickness of 1.2 mm, the cut 17x18cm
then I did a test to see how things were going, and what I feared and successful!!!
as you can see the mobo and tilted, my intention was to avvittare the backplate on the plate that once bore the engine.
but so inclined to mount the type of sink that I will use for the cpu you would not see well because it would be almost completely covered by the frame
time or thought to cut the original plate of the bike and weld my completely horizontal
so I would earn more about 2.5cm in the said should see everything to the limit miss the view of the upper part would be most 100% sure which would not touch anywhere.