[WTB] Full Rig Under 850$ or Parts

[halodude23]

Well, I'm currently looking for a PC mostly for Photoshop, Gaming, Rendering e.t.c
I can either take a fully built rig or parts, personally I would prefer parts.

Red=Found
Blue=Pending

Preferred Parts:

Processor: i5/i7
Motherboard: LGA 1155
GPU: 6xxx/7xxx/6xx
RAM: 8-16 GB
PSU: 700-1000W (Bronze-Platinum)
Case: Mid Tower/Full Tower(Anything nice looking would be fine)
SSD: 60-256 GB(SATA III)
Fan Controller: Must be able to turn off the Fans

--------------------------------------------------
Additional(This is different from the 850$ price range):
Monitor: (2) 1080p Monitors or (1) 1440p

Things I have ATM to trade:
Spyder 4 Pro Calibrator
AKG Q701s
Little Dot MK III + Extra Tubes
NAS

 

[Binge]

 

[halodude23]

 

[Ryleh]

Built my friend the following rig for <$700 with some parts from me and others from Microcenter:

Spoiler

• Intel 2500k
• EVGA P67 SLI Micro
• 2x4gb 1600mhz Mushkin Silverline RAM
• MSI HD7850 PE
• Corsair CX430 430w
• Samsung 840 128tb
• WD Blue 1Tb
• Antec 300
• Logitech G110
• Logitech G400(Original)
• Few other misc. things

So surely you'll be able to find what you're looking for with your requirements. Best of luck.

 

[halodude23]

Built my friend the following rig for <$700 with some parts from me and others from Microcenter:

Spoiler

• Intel 2500k
• EVGA P67 SLI Micro
• 2x4gb 1600mhz Mushkin Silverline RAM
• MSI HD7850 PE
• Corsair CX430 430w
• Samsung 840 128tb
• WD Blue 1Tb
• Antec 300
• Logitech G110
• Logitech G400(Original)
• Few other misc. things

So surely you'll be able to find what you're looking for with your requirements. Best of luck.

Not bad of a rig, I'm actually looking for something in between those lines with a little improvement over certain aspects

 

[brandonwh64]

Processor: i5/i7 - Used 2500K
Motherboard: LGA 1155 - Used P67
GPU: 7xxx/6xx - Used card
RAM: 8-16 GB - NEW from the egg
PSU: 700-1000W (Bronze-Platinum) - NEW form the egg
Case: Mid Tower/Full Tower(Anything nice looking would be fine) - NZXT SOURCE 29.99$ free ship right now
SSD: 60-256 GB(SATA III) - is this needed?

This?

 

[halodude23]

This?

I'm just generalizing since I know most people would have most likely have an i5 2500k or i7 so I'm just seeing what I can snatch ATM. Not sure I'd go that low with the motherboard though. Eh, about the PSU, mostly looking towards the upper end, but still, I'm generalizing. An SSD is required, I can't stand the slow boot times of an HDD, it's a pain the ss

Thanks for trying to help though

 

[brandonwh64]

P67 is still a strong board. I just sold a B2 P67 UD4 and that thing was a work horse and OCed nicely

 

[halodude23]

P67 is still a strong board. I just sold a B2 P67 UD4 and that thing was a work horse and OCed nicely

Yeah I hear ya, just looking for something more worthwhile that I can sell back later on with a bit more $$ if I have to.

 

[brandonwh64]

Even if you get a Z68 board, the price will still decrease over time. Its like all PC hardware.

 

[solara2xb]

I have a i5 2500k with the retail box. I pulled this from my old LanPC, I upgraded to a 3570k a few months ago.

 

[Binge]

don't forget your UPS. You don't want a power outage to mess up your SSD.

 

[halodude23]

don't forget your UPS. You don't want a power outage to mess up your SSD.

I'm fine, a UPS isn't necessary since there's like almost never any power outages here.

 

[brandonwh64]

I have a nice rack mounted UPS if you need one.

 

[halodude23]

I have a nice rack mounted UPS if you need one.

Do you have a model name perhaps?

 

[brandonwh64]

Its a APC Smart-UPS rack mounted. I believe its a 2200VA 2U

 

[halodude23]

Its a APC Smart-UPS rack mounted. I believe its a 2200VA 2U

Eh, I'm guessing this is going to be somewhere between 500-750$?

 

[brandonwh64]

Eh, I'm guessing this is going to be somewhere between 500-750$?

Ummm well I can figure out a price since its not being used for anything at the moment.

 

[halodude23]

Ummm well I can figure out a price since its not being used for anything at the moment.

Well, it's gonna be a pain to ship for ya probably but if you have a good price for me, let me know!

 

[brandonwh64]

Well, it's gonna be a pain to ship for ya probably but if you have a good price for me, let me know!

I will, let me measure it but yes it does weigh alot.

 

[halodude23]

Bump

 

[halodude23]

Bump