de.das.dude
Pro Indian Modder
- Joined
- Jun 13, 2010
- Messages
- 8,783 (1.74/day)
- Location
- Stuck in a PC. halp.
| System Name | Monke | Work Thinkpad| Old Monke |
|---|---|
| Processor | Ryzen 5600X | Ryzen 5500U | FX8320 |
| Motherboard | ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4 |
| Cooling | 240mm Rad | Not needed | hyper 212 EVO |
| Memory | 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600 |
| Video Card(s) | Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB |
| Storage | Samsung 980 nvme (Primary) | some samsung SSD |
| Display(s) | Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L |
| Case | Ant Esports Tempered case | Thinkpad | Antec |
| Audio Device(s) | Logitech Z333 | Jabra corpo stuff |
| Power Supply | Corsair RM750e | not needed | Corsair GS 600 |
| Mouse | Logitech G400 | nipple |
| Keyboard | Logitech G213 | stock kb is awesome | Logitech K230 |
| VR HMD | ;_; |
| Software | Windows 10 Professional x3 |
| Benchmark Scores | There are no marks on my bench |
i call it "X-connect"
here it is :
Behind the Innovation:-
Being an avid modder, i often faced the challenge of managing the enormous amount of wires that result from attaching different mods like fans, lights controllers etc. All of them need to be individually connected to power. This results in a huge mess.
So i did some brainstorming and came up with a possible way to effectively reduce the clutter.
Introducing For The First Time : X-Connecting LED lighting systems for PC cases!
The Design
The Product
The Product will be available in the following specifications:-
LED Strip length: 6"
Wire lengths : 6" or 9" or none (depending on user preference)
No. of LEDs: 3x3= 9 High intensity LEDs
Type of connection:-
Input: 3 pin female at end of wire.
Output (to another strip): 3 pin male.
Colors Available: Blue, White, Red , Green (cannot confirm on the availability of all the colors at hand, as it will depend on demand)
I have decided on the length of 9" as this will fit most cases both in length and in depth, so one size does it all.
Nevertheless, specific lengths can be made according to the clients will, but it will come with a premium fee.
Product Images
soldering setup
sleeving overhead
sleeve-unsleeved connection
sleeved overhead
The Thing that sets it apart! inter-connectible jacks!
Hope this product will be accepted in the modding community
(c) sayan das
here it is :
Behind the Innovation:-
Being an avid modder, i often faced the challenge of managing the enormous amount of wires that result from attaching different mods like fans, lights controllers etc. All of them need to be individually connected to power. This results in a huge mess.
So i did some brainstorming and came up with a possible way to effectively reduce the clutter.
Introducing For The First Time : X-Connecting LED lighting systems for PC cases!
The Design
The Product
The Product will be available in the following specifications:-
LED Strip length: 6"
Wire lengths : 6" or 9" or none (depending on user preference)
No. of LEDs: 3x3= 9 High intensity LEDs
Type of connection:-
Input: 3 pin female at end of wire.
Output (to another strip): 3 pin male.
Colors Available: Blue, White, Red , Green (cannot confirm on the availability of all the colors at hand, as it will depend on demand)
I have decided on the length of 9" as this will fit most cases both in length and in depth, so one size does it all.
Nevertheless, specific lengths can be made according to the clients will, but it will come with a premium fee.
Product Images
soldering setup
sleeving overhead
sleeve-unsleeved connection
sleeved overhead
The Thing that sets it apart! inter-connectible jacks!
Hope this product will be accepted in the modding community
(c) sayan das
Last edited:
!!
