• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Wood Case idea/doodle

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Might be possible to make it thinner then, like 14x12 But since I don't have your hardware with me to measure its better to error on too big.
Size doesn't matter lol
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Thinking about things...
So if you have 3 sides of the bottom taken up by rad where do you think/prefer HDD and PSU and the 5.25 bay should be?

I just don't think a radiator in the front lower chamber is a good idea because then you won't have space for the 5.25. And you'd probably want the 5.25 in front.

Obviously you don't want power supply in front do you? But if you were okay with that then put the 5.25 on the side next to the PSU and put the 3.5s below it.

You'd want the pump in the bottom too...

Maybe ms paint your ideal config for me.
You could do a top down view of the bottom space.

The other idea you could do is have one radiator up top which would also provide airflow to components, the other two still on the bottom with crossflow.

Since I am a WC noob and its your system you should make some diagrams and I'll draft to that.
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Thinking about things...
So if you have 3 sides of the bottom taken up by rad where do you think/prefer HDD and PSU and the 5.25 bay should be?

I just don't think a radiator in the front lower chamber is a good idea because then you won't have space for the 5.25. And you'd probably want the 5.25 in front.

Obviously you don't want power supply in front do you? But if you were okay with that then put the 5.25 on the side next to the PSU and put the 3.5s below it.

You'd want the pump in the bottom too...

Maybe ms paint your ideal config for me.
You could do a top down view of the bottom space.

The other idea you could do is have one radiator up top which would also provide airflow to components, the other two still on the bottom with crossflow.

Since I am a WC noob and its your system you should make some diagrams and I'll draft to that.
Yea I think case would be bigger than normal to fit rads

I'll see if I can do a sketchup myself of the bottom
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Tried my best

 
Joined
Jul 1, 2014
Messages
37 (0.01/day)
Location
Toronto and Dubai
I thought wood cases would not be too good due to static? i guess im wrong.
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Tried my best


That would be pretty enormous. All the radiators side by side need between 15 and 18" of space. Did you want the radiators downfiring? I'd think it would be more efficient to have the radiators crossflow:

How about, looking from the front:
lower left side: 1 radiator (intake)
lower right side: 1 radiator (exhaust)
lower front side: 3x5.25 bay (might as well have two or three, you got the space) and hdd (could use a hot swap bay to make it look clean)
lower rear side: psu, pump
upper front side: 1 radiator (intake)
Upper right side: window
Upper left side: window
Top panel: Window or solid wood, depends on your skill, with vent slits or possibly exhaust fans/ (or a single 200m fan)



with windows:


If you could do me a favor and measure the radiators volume dimensions roughly with fans and hose barbs installed. So I can get an idea of how much depth I need to accomodate. So length, height, depth.
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
I kind wanted glass all around except the back where the motherboard I/O will be. Also only need 1x 5.25 bay and wanted rads hidden. But amazing sketch-ups. I'll measure them once i find the tap measure
 
Joined
Mar 7, 2007
Messages
3,842 (0.62/day)
Location
Maryland
System Name HAL
Processor Core i9 13900k @5.8-6.1
Motherboard Z790 Arous master
Cooling EKWB Quantum Velocity V2 & (2) 360 Corsair XR7 Rads push/pull
Memory 2x 32GB (64GB) Gskill trident 6000 CL30 @28 1T
Video Card(s) RTX 4090 Gigagbyte gaming OC @ +200/1300
Storage (M2's) 2x Samsung 980 pro 2TB, 1xWD Black 2TB, 1x SK Hynix Platinum P41 2TB
Display(s) 65" LG OLED 120HZ
Case Lian Li dyanmic Evo11 with distro plate
Power Supply Thermaltake 1350
Software Microsoft Windows 11 x64
Looks pretty classy with that wood finish.
Wonder how doing with a wood inlay, like the interior of a BMW, would turn out.
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
I kind wanted glass all around except the back where the motherboard I/O will be. Also only need 1x 5.25 bay and wanted rads hidden. But amazing sketch-ups. I'll measure them once i find the tap measure
Update

1st Radiator
11.5" Long
5" Wide
3.5" Thick (With Fans)

2nd Radiator
11" Long
5" Wide
2.5" Thick (with Fans)

3rd Radiator
11" Long
5" Wide
2.5" Thick (With Fans)
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Update

1st Radiator
11.5" Long
5" Wide
3.5" Thick (With Fans)

2nd Radiator
11" Long
5" Wide
2.5" Thick (with Fans)

3rd Radiator
11" Long
5" Wide
2.5" Thick (With Fans)
Okay cool thanks for the update. So you want the radiators to downfire and be invisible? The consequence is it will be huge and take up a lot of desk real estate. I have no problem designing this for you..

The radiators might end up being invisible but how will they get enough airflow?
Would you intake from the sides of the bottom chamber and exhaust from the radiators downfiring? Then you have visible fans so you might as well just put the radiators on the sides as I suggest.

The radiator dimensions will be very helpful regardless because I can tell how large the chamber needs to be so things can fit without interference.
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Okay cool thanks for the update. So you want the radiators to downfire and be invisible? The consequence is it will be huge and take up a lot of desk real estate. I have no problem designing this for you..

The radiators might end up being invisible but how will they get enough airflow?
Would you intake from the sides of the bottom chamber and exhaust from the radiators downfiring? Then you have visible fans so you might as well just put the radiators on the sides as I suggest.

The radiator dimensions will be very helpful regardless because I can tell how large the chamber needs to be so things can fit without interference.
My idea was intake from the bottom. Size doesn't concern me really but sketch what you think will work best while looking good.
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
My idea was intake from the bottom. Size doesn't concern me really but sketch what you think will work best while looking good.
And its paramount that the top will be a clear box with no fans, no 5.25 etc? I have a couple ideas for this.

The only thing is it might look really good but you will need air flow over the mobo and ram etc, because the plexiglass wood combo won't dissipate heat like a metal case would. The top might become a "greenhouse"

Also you would need in excess of 2 feet square for the lower chamber, which would be huge. If you take a tape measure and measure this out you will find that it is gonna take up your whole desk.


if you use 3 of these types of grill
http://www.frozencpu.com/cat/l3/g/c..._Accessories-Radiator_Grills_-_240-Page1.html
You could get a very nice look and you can mount the grill to the wood, the radiator to the grill, so it looks professional.
Like this
http://www.frozencpu.com/products/2...pes_-_Black_Powder_Coat.html?tl=c637s2282b189
which has extra holes for mounting the radiator grill to the case.
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Must be clear yes and no i don't mind fans but no 5.25.

2 feet is about one i was thinking before

Also i like that grill you linked. Maybe that could work with rads mounted on the bottom sides
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Must be clear yes and no i don't mind fans but no 5.25.

2 feet is about one i was thinking before

Also i like that grill you linked. Maybe that could work with rads mounted on the bottom sides

I have a couple of those I used for my wood itx wood project and they look really nice against the wood grain. The 2x120mm panel I have been using as a fan/radiator placeholder in above sketchup is the same dimensions because I measured it off my rad grill.
Yes that was what I was thinking, it would look clean, you dont see the rads or the fans you see the black rad grills against the wood grain, makes it look very nice and finished.



I kinda scrapped this project because it ended up being enormous for an itx, but I liked how it was going.

The power switch plate i used is from MNPCTech.
http://mnpctech.com/pc-switch-plates/22mm-22mm-switch-plate/
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
I have a couple of those I used for my wood itx wood project and they look really nice against the wood grain. The 2x120mm panel I have been using as a fan/radiator placeholder in above sketchup is the same dimensions because I measured it off my rad grill.
Yes that was what I was thinking, it would look clean, you dont see the rads or the fans you see the black rad grills against the wood grain, makes it look very nice and finished.

Nice that's similar to what I was thinking.
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Nice that's similar to what I was thinking.
Yep it looks pretty sharp, also the wood works as a nice deadener for noise. That wood is 1/2" Pine. I don't know if I'd have used pine the second time around, maybe 1/2" oak plywood.
 

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Yep it looks pretty sharp, also the wood works as a nice deadener for noise. That wood is 1/2" Pine. I don't know if I'd have used pine the second time around, maybe 1/2" oak plywood.
So like that. One in the front and others on left and right sides.
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
So like that. One in the front and others on left and right sides.
Awesome that was what I was thinking too.
rear view with no back panel on lower chamber

front view


could you measure the pump dimensions please? Also do you have a HDD cage you plan to use?
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
I'll probably scale up the design to fit the 5.25 bay on the front. Do you want it sideways in the front (as in 90 degree mount and to the left or right of radiator) or above radiator or below etc? maybe mspaint it onto my sketchup.

Also I am thinking that the back panel for the lower chamber would be removable but the others (Front,Left,Right) are glued in.

The question I have is how hard it will be to get to the HDDs. The easy way out is to velcro them all together in the bottom I guess. Hard way is to either make or buy or salvage a cage and throw it in next to the power supply. I am sure if I scale the design up 2-3" cubed there will be plenty of space. You could do 2 of these http://www.amazon.com/dp/B0034XRDV4/?tag=tec06d-20 side by side. Not sure the best way to retain them in. I have one of those cages, I could measure and mock it up in sketchup. I am just not sure how to mount it in such a way that you can easily remove it.
The easiest way is get some velcro tape and tape them all together in a stack then tape that to the floor of the case.

I also wonder how to mount an externally accessible 5.25 and make it look good. Obvious way is to just make a cut out but you have to have steady hands with a jigsaw to make the square cut out hole look nice and even. Of course a scroll saw would be nice.
 
Last edited:

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
I'll probably scale up the design to fit the 5.25 bay on the front. Do you want it sideways in the front (as in 90 degree mount and to the left or right of radiator) or above radiator or below etc? maybe mspaint it onto my sketchup.

Also I am thinking that the back panel for the lower chamber would be removable but the others (Front,Left,Right) are glued in.

The question I have is how hard it will be to get to the HDDs. The easy way out is to velcro them all together in the bottom I guess. Hard way is to either make or buy or salvage a cage and throw it in next to the power supply. I am sure if I scale the design up 2-3" cubed there will be plenty of space. You could do 2 of these http://www.amazon.com/dp/B0034XRDV4/?tag=tec06d-20 side by side. Not sure the best way to retain them in. I have one of those cages, I could measure and mock it up in sketchup. I am just not sure how to mount it in such a way that you can easily remove it.
The easiest way is get some velcro tape and tape them all together in a stack then tape that to the floor of the case.

I also wonder how to mount an externally accessible 5.25 and make it look good. Obvious way is to just make a cut out but you have to have steady hands with a jigsaw to make the square cut out hole look nice and even. Of course a scroll saw would be nice.
below radiator

I have 2x HDD cages i was gonna use
 

de.das.dude

Pro Indian Modder
Joined
Jun 13, 2010
Messages
8,756 (1.74/day)
Location
Stuck in a PC. halp.
System Name Monke | Work Thinkpad| Old Monke
Processor Ryzen 5600X | Ryzen 5500U | FX8320
Motherboard ASRock B550 Extreme4 | ? | Asrock 990FX Extreme 4
Cooling 240mm Rad | Not needed | hyper 212 EVO
Memory 2x16GB DDR4 3600 Corsair RGB | 16 GB DDR4 3600 | 16GB DDR3 1600
Video Card(s) Sapphire Pulse RX6700XT 12GB | Vega 8 | Sapphire Pulse RX580 8GB
Storage Samsung 980 nvme (Primary) | some samsung SSD
Display(s) Dell 2723DS | Some 14" 1080p 98%sRGB IPS | Dell 2240L
Case Ant Esports Tempered case | Thinkpad | Antec
Audio Device(s) Logitech Z333 | Jabra corpo stuff
Power Supply Corsair RM750e | not needed | Corsair GS 600
Mouse Logitech G400 | nipple
Keyboard Logitech G213 | stock kb is awesome | Logitech K230
VR HMD ;_;
Software Windows 10 Professional x3
Benchmark Scores There are no marks on my bench
wood wont like heights. :D why not mmake a desk since it will be from scratch?
 
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2

Durvelle27

Moderator
Staff member
Joined
Jul 10, 2012
Messages
6,678 (1.56/day)
Location
Memphis, TN
System Name Black Prometheus
Processor |AMD Ryzen 7 1700X
Motherboard ASRock B550M Pro4|MSI X370 Gaming PLUS
Cooling Thermalright PA120 SE | AMD Stock Cooler
Memory G.Skill 64GB(2x32GB) 3200MHz | 32GB(4x8GB) DDR4
Video Card(s) |AMD R9 290
Storage Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s) LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s) LG Dolby Atmos 5.1
Power Supply Corsair RMX850 Fully Modular| EVGA 750W G2
Mouse Logitech Trackman
Keyboard Logitech K350
Software Windows 10 EDU x64
Joined
Oct 21, 2005
Messages
6,874 (1.02/day)
Location
USA
System Name Computer of Theseus
Processor Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard EVGA Z690 Classified
Cooling Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s) EVGA Geforce 3060 XC Black Gaming 12GB
Storage 1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s) Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case Lian Li O11 Air Mini
Audio Device(s) Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse Zowie EC3-C
Keyboard Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software Win 10 LTSC 21H2
Top