- Joined
- Mar 17, 2013
- Messages
- 451 (0.11/day)
- Location
- Earth
System Name | Game / Work |
---|---|
Processor | Amd 1800X @3900 / Intel 9600kf @ 4600 |
Motherboard | Asus C VI H / Msi z390 A pro |
Cooling | air atm / liquid |
Memory | 16gb 4000mhz @3400 / 16 gb 3600 mhz |
Video Card(s) | Msi 1080ti / Amd Radeon pro w5500 |
Storage | Ocz rd400 512 gb m2 + Seagate Exos 4 tb / 250gb Kingston A2000 + WD 2tb Gold |
Display(s) | Aoc 32" qhd |
Case | Working on a new project |
Audio Device(s) | Beyerdynamics DT 770 pro + Logitech Z 623 |
Power Supply | seasonic 1050 snow white / CM V750 Gold |
Mouse | Razer Basilisk |
Keyboard | Gskill Ripjaws KM 780 MX |
Software | W 10 pro 64 / W 10 pro 64 |
Benchmark Scores | Just checked, the computer still works. |
Greetings all,
Here starts the European Kreij case.
A while ago I had began this modded case witch is the Cooler Master K280, the idea was very simple, rotate the box by 90 degrees, make a tank in iron for watercooling and change the outside appearance closer to the Cosmos style, not copy paste but make an alternative Cosmos atx case ( all Cosmos cases are full and ultra towers).
I have delayed this presentation because I was waiting for the CM mod competition of this year.
(It seems it wont happen at least for the incoming times, and so is time to move on.)
It has began on the seventh day of this year and ends on 04-30-2015.
I´m on the race.
Also this project has been delayed by a couple of issues like had to make the same piece in several versions and still doesn´t fit into big picture, etc.
I have some hardware upgrades to make and I´ll post when I get that part.
I want to thank to @Norton for his advice by making a separate thread.
The following pictures.
The top turned to front with the cuts to 240mm radiator.
The tank made in proper place and position also being the core of structure.
I must say the tank didn´t went as I expected.
Here appears the outside frame made in pine wood.
The front shell to enclosure the 240mm rad and will take four 80mm fans to make a full tower appearance.
That´s all for now, during this week I´ll update to date with more changes,
Until then.
Here starts the European Kreij case.
A while ago I had began this modded case witch is the Cooler Master K280, the idea was very simple, rotate the box by 90 degrees, make a tank in iron for watercooling and change the outside appearance closer to the Cosmos style, not copy paste but make an alternative Cosmos atx case ( all Cosmos cases are full and ultra towers).
I have delayed this presentation because I was waiting for the CM mod competition of this year.
(It seems it wont happen at least for the incoming times, and so is time to move on.)
It has began on the seventh day of this year and ends on 04-30-2015.
I´m on the race.
Also this project has been delayed by a couple of issues like had to make the same piece in several versions and still doesn´t fit into big picture, etc.
I have some hardware upgrades to make and I´ll post when I get that part.
I want to thank to @Norton for his advice by making a separate thread.
The following pictures.
The top turned to front with the cuts to 240mm radiator.
The tank made in proper place and position also being the core of structure.
I must say the tank didn´t went as I expected.
Here appears the outside frame made in pine wood.
The front shell to enclosure the 240mm rad and will take four 80mm fans to make a full tower appearance.
That´s all for now, during this week I´ll update to date with more changes,
Until then.
Last edited: